| Porsche 924S/944/968 Tools - Page 1 |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. All tools sold by Pelican Parts are not returnable, except for warranty repair or replacement. |
|
Lug Nut Soft Socket |
Every Porsche owner needs a Soft Socket in their tool box! This high quality, chrome plated lug nut socket was designed with inlaid high impact nylon to prevent rounded corners or scratches on your lug nuts. Cannot be used with air tools.
NOTE: Not for use with steel lug bolts/nuts, ONLY for original aluminum lug nuts! Also not to be used to break stuck lug nuts free from the wheels! |
|
PEL-SS-19 | Lug Nut Soft Socket [Photo] | $25.45 |  |
| This special thin walled, heavy duty IMPACT socket with a riveted Aluminum insert was developed for the crucial task of R&R of wheel lugs nuts/bolts without marring or scuffing the surface of the wheel or bolts. Measuring at 3.5" to fit into deep recess of wide wheels. Comes with a limited life-time warranty, guaranteed to be the last 19mm wheel lug socket you'll ever buy. |
|
PEL-TOL-LUG19MM | Impact Duty Soft-Walled Lug Nut Socket - 19mm [Photo] | $28.30 | |
12-Point/12mm Flywheel Socket |
| Get the correct socket to remove/install those Flywheel Bolts ! |
|
TOL-SK41422 | Flywheel Bolt Socket Tool, 12-Point/12mm [Photo] [Photo] | $16.00 | |
944/968 Flywheel Lock |
| This lock is required after you replace the front oil seal and need to retorque the front pulley. Also required during clutch changes in order to remove the flywheel bolts. |
|
PEL-TOL-P233 | 944 Flywheel Lock [Photo] | $47.00 | |
| 000-721-920-61-OEM | 968 Flywheel Lock
Brand: Genuine Porsche | $68.75 | |
Oil Filter Wrenches |
| Get off easily with our new oil filter wrench! This wrench attaches directly to the top of the oil filter and allows you to attach a standard 3/8" drive ratchet to remove the filter. Gone are the days of poking messy holes in the filter just to get a screwdriver in there to remove it from the oil tank. |
|
PEL-PP903124 | Oil Filter Removal Socket Wrench Tool - 911/C2/C4 (1965-94), 911 Turbo (1976-89) [Photo] | $10.10 | |
| This factory tool for your 996 or Boxster will surely do the trick! Use it in conjunction with a 27mm 6-point socket, and you'll be done with your oil change in no time. |
|
| TOL-SK34277 | 27mm 1/2"-Drive Deep Impact Socket, 6-point, SK Tools | $21.25 | |
Hub/Bearing Extractor and Installer Kit  |
| Want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one Porsche kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The kit comes with a set of adapters specific to the Porsche series, but can also be used on all front and rear wheel drive vehicles with independent suspension. Also for R&R of the rear wheel bearings only on models with drum brakes independent rear suspension. |
|
| PEL-TOL-SIRB90-P1 | Hub/Bearing Extractor and Installer Kit, 911 1965-73, 912 All, 914 All | $166.00 | |
| PEL-TOL-SIRB90-P2 | Rear Hub/Bearing Extractor and Installer Kit, 911 1973-on, 924, 944, 968, All, Boxster | $166.00 | |
| PEL-TOL-SIRB90-P3 | Hub/Bearing Extractor and Installer Kit, 911 Turbo (1990-), 928 All | $166.00 | |
Oil Seal Installation Tools |
| When rebuilding your motor, do the job right with our oil seal installation tools. Designed to perform an installation that is perfectly aligned with the case, these installation tools will guarantee a leak-free seal, without damaging your valuable case. |
|
PEL-TOL-P215 | Oil Seal Installation Tool for 911 (1965-77), Flywheel Side [Photo] | $113.00 | |
PEL-TOL-P234 | Oil Seal Installation Tool for 911 (1978-94), Flywheel Side [Photo] | $134.00 | |
PEL-TOL-P216 | Oil Seal Installation Tool for 911 (1965-89), Pulley Side [Photo] | $56.00 | |
PEL-TOL-P251 | Oil Seal Installation Tool - Pulley Side, 996 Carrera 2/4 (1999-04), Boxster/Boxster S (1997-04), Each [Photo] | $103.00 | |
PEL-TOL-P252 | Oil Seal Installation Tool - Mainshaft Seal, 996 Carrera 2/4 (1999-04), Boxster/Boxster S (1997-04), Each [Photo] | $95.00 | |
PEL-TOL-P231 | Oil Seal Installation Tool for 944, Balance Shaft [Photo] | $40.00 | |
PEL-TOL-P218 | Oil Seal Alignment Tool for 944 (1983-86) [Photo] | $20.00 | |
