| Porsche 924S/944/968 Suspension - Page 5 |
Monoball Joints |
| Elephant Racing Monoball Cartridges |
These little gems will hold your camber settings lap after lap. If you want to be fast, your suspension pickup points must be rigid to hold suspension geometry in check even under the heaviest corner loads. Pivots points need to be friction free. Heavy corner loads generated by todays stickier tire compounds easily compress and distort rubber bushings making it impossible to hold suspension settings. Camber, caster and toe flop around along with the bushings.
Elephant Racing monoball cartridges replace the compliant upper strut and rear trailing arm rubber bushings with hardened-steel precision spherical bearings. Since they cant compress, these monoballs hold suspension settings under the heaviest corner loads. Driver feedback becomes precise and positive.
- Precision hardened-steel spherical bearings
- Proprietary Weather Seal to prevent corrosion/contamination
- Eliminates rubber bushing compression
- Maintains alignment settings through turns
- Improves feel and driver feedback
The cartridges are pre-assembled and install easily into factory camber plates using hand tools (can even be secured with a safety wire). Monoball cartridges install easily onto factory control arms. The proprietary weather seal design ensures years of trouble free service. |
|
ERMP-2201700 | Elephant Racing Weather-Sealed Control Arm Front Monoball Cartridge Set, 944/968 (1985-95) [More Info] | $250.00 |  |
ERMP-2211700 | Elephant Racing Weather-Sealed Control Arm Rear Monoball Cartridge Set, 944/968 (1985-95) [More Info] | $294.95 | |
ERMP-2221800 | Elephant Racing Weather-Sealed Trailing Arm Monoball Cartridge Set, 944/968 (1978-95) [More Info] | $295.00 | |
O.E. Suspension Bushings and Related Components |
| Perhaps the best thing that you can do to help an aging suspension is to replace old, brittle bushings with new high-tech, space-age, low-fat, super-duper ones. The newer bushings are made from better materials and will not wear out as easily as 25+ year old rubber ones. |
|
| Front Bushings |
| 477-407-181A-M66 | OEM Front Control Arm Bushing, Rear Of Arm, 924S (1987-88), 944 (1983-01/85), Each
Brand: Phoenix [More Info] |  |
| $35.25 | |
477-407-169-OEM | Control Arm Bushing Bracket, Rear Of Arm, 924S (1987-88), 944 (1983-01/85), Each
Brand: Genuine Porsche [More Info] | $80.00 | |
| 171-407-182D-M5069 | OEM Front Control Arm Bushing For Front Of Arm, 924S (1987-88), 944 (1983-01/85), Each
Brand: Lemfoerder - Por [More Info] | |
| $5.00 | |
| 951-341-023-01-M737 | Rear Mount with Bushing for Front Suspension Control Arm, 944/968 (02/85-95), Each
Brand: Hamburg Technic [More Info] | |
| $58.50 | |
| 944-343-071-00-M100 | OEM Upper Strut Bushing/Bearing, 924S (1987-88), 944/Turbo (1983-86), Each
Brand: Genuine Porsche [More Info] | |
| $53.00 | |
| O.E. Rubber Rear Bushings |
477-501-541-OEM | OEM Rear Trailing Arm Bushing, 924/944 (1977-01/85), Each
Brand: Genuine Porsche [More Info] | $37.00 | |
| Elephant Racing PolyBronze Suspension Bushings |
| Unlike the original rubber bushings, Elephant Racing PolyBronze Suspension Bearings provide a bronze-on-steel low friction surface, housed in a vibration absorbing polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing. The inner figure 8 groove with built in grease nipple, allow for quick access when relubricating and provide squeak free & friction free movement. |
|
ERMP-2231800 | Elephant Racing, Rear Spring Plate PolyBronze Suspension Bushing Set, 944/924/924S/968 (1978.5-95) [More Info] | $315.00 | |
Elephant Racing Spring Plate Bushing Removal Tool |
| Elephant Racing developed this tool to simplify the removal of spring plate bushings. The bushings are bonded to the spring plate, and removal is not easy. This convenient cutting tool shaves the bushings off, removing nearly all the rubber and require just a bit of cleanup to finish. This tool greatly simplifies the bushing removal process. |
|
ERMP-2061002 | Elephant Racing Spring Plate Bushing Removal Tool, 911/911 Turbo (1965-86), 944/968 [More Info] | $85.00 | |
