| Porsche 924S/944/968 Exhaust Pipes - Page 2 |
Exhaust Manifold Gaskets and Related Hardware |
| Exhaust Manifold Bolts |
900-074-282-02-OEM | Exhaust Manifold Hex-Head Bolt, Lower Exhaust Manifold to Upper Exhaust Flange, M8 X 37mm, 6 Per Car, 924S/944/968 All (1983-95), Each
Brand: Genuine Porsche [Photo] | $2.75 |  |
| 900-074-268-02-OEM | Exhaust Sealing Ring Hex-Head Bolt (M8 X 40mm, sold per each, 3 required, Convertor to Muffler), 944S2 (1987-88), 968 (1992-95), Each
Brand: Genuine Porsche | $1.90 | |
| 944-111-204-00-OEM | Exhaust Sealing Ring, 944S2 (1987-88) Each
Brand: Genuine Porsche | $9.00 | |
Turbo Sealing Gaskets and Related Hardware |
| Exhaust gaskets, fasteners and flanges live in a very harsh environment where extreme heat wreck havoc on these components, often causing annoying exhaust leaks and tensile failure of the nuts and bolts. |
|
| Exhaust Manifold Sealing Rings |
944-111-205-04-M17 | Exhaust Sealing Ring, Manifolds to Crossover Pipe, Turbo to Collector Pipe, Wastegate to Exhaust Pipe, 4 Per Car, 944 Turbo (1986-89), Each
Brand: Victor Reinz [Photo] |  |
| $18.25 | |
951-123-134-02-M17 | Exhaust Sealing Ring, Wastegate Exhaust Pipe to Catalytic Converter, 944 Turbo (1986-89), Each
Brand: Victor Reinz [Photo] [Photo] | |
| $12.50 | |
951-123-138-01-OEM | Exhaust Sealing Ring Flange, Wastegate Exhaust Pipe to Catalytic Converter, 944 Turbo (1986-89), from VIN Number 95 GN150061, Each
Brand: Genuine Porsche [Photo] | $97.50 | |
993-111-195-00-M17 | Exhaust Sealing Ring, Header Pipe to Wastegate, 944 Turbo (1986-89), Each
Brand: Victor Reinz [Photo] [Photo] | |
| $5.25 | |
| Exhaust Manifold Nuts |
900-910-096-02-OEM | Exhaust Sealing Ring Flange Locking Nut, M6, 2 Per Car, 944 Turbo (1986-89), Each
Brand: Genuine Porsche [Photo] | $6.00 | |
| Exhaust Manifold Lock Washers |
N-012-009-1-OEM | Lock Washer, Wastegate to Exhaust Pipe, 4 Per Car, 944 Turbo (1986-89), Each
Brand: Genuine Porsche [Photo] | $0.50 | |
| Exhaust Manifold Bolts |
900-075-079-02-OEM | Hex Head Bolt, Wastegate to Exhaust Pipe, M8 X 25mm, 4 Per Car, 944 Turbo (1986-89), Each
Brand: Genuine Porsche [Photo] | $1.25 | |
900-074-234-02-OEM | Exhaust Sealing Ring Flange Bolt, M6 X 40mm, 2 Per Car, 944 Turbo (1986-89), Each
Brand: Genuine Porsche [Photo] | $24.75 | |
Catalytic Converters and Related Hardware |
| Car not passing smog anymore? Troubled with bad emissions? Perhaps you need a new catalytic converter. Don't forget to replace the rubber hangers, gaskets and rusted out nuts and bolts. Catalytic Converter gaskets often burnout and begin to leak causing loss of power and that annoying loud noise that is associated with blown exhaust gaskets. |
|
| 944-111-989-03-OEM | Catalytic Converter, 944 (1983-87), 944 (1988-89, With Automatic Transmission), Each
Brand: Genuine Porsche | $1738.75 | |
| 944-111-991-11-OEM | Catalytic Converter, 968 (1991-95), Each
Brand: Genuine Porsche | $1709.00 | |
Air/Fuel Ratio Monitors  |
The K&N Air/Fuel Monitor is designed to help the performance enthusiast calibrate and fine tune the air/fuel mixture ratio. It is an invaluable diagnostic tool that has a place in everyone's tool box, or you can install it in your car to give you real-time readings. This kit continually monitors an engine's air/fuel ratio while the engine is running. It is extremely sensitive to air/fuel ratio changes and will show them instantly and accurately, within the range of the oxygen sensor.
The instrument works whether the engine is carbureted or fuel injected, normally aspirated, turbocharged, or supercharged, and at any load condition. This precision instrument also works with nitrous oxide, but will not work with diesel or nitro-methane fuels. This kit comes complete with an oxygen sensor that must be installed into the exhaust system by welding. If your BMW is already equipped with an oxygen sensor an air/fuel monitor may be purchased separately and wired into the existing electrical system. An oxygen sensor is also available separately.
Vehicles with dual exhaust systems can utilize an oxygen sensor in each headpipe or collector that is controlled by a switch that will allow each sensor or bank of cylinders to be read independently. This can show if there is a fuel distribution problem within the intake system, or help to pinpoint a potential problem in advance. |
|
PEL-SW85-2437 | Rectangle Surface mount Air/Fuel Ratio Monitor Kit, w/oxygen sensor [Photo] | $199.55 | |
PEL-SW85-2441 | Round In Dash mount Air/Fuel Ratio Monitor Kit, w/oxygen sensor [Photo] | $256.95 | |
PEL-SW85-2439 | Rectangle Surface mount Air/Fuel Ratio Monitor Kit, without oxygen sensor [Photo] | $188.35 | |
PEL-SW85-2442 | Round In Dash mount Air/Fuel Ratio Monitor Kit, without oxygen sensor [Photo] | $217.40 | |
PEL-SW85-2438 | Replacement Oxygen Sensor [Photo] | $85.00 | |
PEL-SW85-2440 | O2 Sensor Plug and Fitting [Photo] | $21.60 | |
| PEL-SW85-21688 | Weld on Fitting | $14.50 | |
| PEL-SW85-21686 | O2 Sensor Plug | $16.15 | |
