| Porsche 924S/944/968 Main Engine Components - Page 4 |
RACEWARE Kits |
| RACEWARE Cylinder Head Studs, Nuts and Washers |
RACEWARE Aerospace QUALITY Head Studs Eliminate Head Gasket Leaks and Increase Power! RACEWARE Head Stud Kits (HSK) are the only Aerospace Quality Engine Fasteners to come with a written Lifetime Money-Back Satisfaction Guarantee!
RACEWARE 12-Point Aircraft Nuts come with an Anti-Friction Coating to assure accurate tightening eliminating annoying leaks. Engines run up to 15 degrees cooler and allows for easy Access to second sparkplug on dual sparkplug applications. Installs without the hassles of hex or splined drivers.
RACEWARE BILLET Hardened Cylinder Head Washers are precision CNC Machined for correct size and fit to prevent crushing of aluminum in head that allows loss of clamp force. RACEWARE BILLET Hardened Cylinder Head Washers also offer an O.D. chamfer that eliminate stress risers and potential cracks in heads, as opposed to typical cheap stamped steel washers with sharp edges.
NOTE:RACEWARE 924/944/968 Head Stud Kits come with Hardened Washers and 12-Point Aircraft Nuts. Click here to view the Raceware Fastener Site |
|
| PEL-RTE-1006 | RACEWARE Cylinder Head Stud Kit (sold as a complete Kit, Includes 12-Point Nuts and Hardened Washers), 924/924 Turbo (1976-82) [More Info] | $215.35 |  |
| PEL-RTE-1011 | RACEWARE Cylinder Head Stud Kit, Kit Includes 12-Point Nuts and Hardened Washers, 944 (1983-88), 944 Turbo 2-Valve (1986-89) [More Info] | $289.30 | |
| PEL-RTE-1012 | RACEWARE Cylinder Head Stud Kit, Kit Includes 12-Point Nuts and Hardened Washers, 944 16-Valve (1987-88) [More Info] | $289.30 | |
| PEL-RTE-1037 | RACEWARE Cylinder Head Stud Kit, Kit Includes 12-Point Nuts and Hardened Washers, 968 (1992-95) [More Info] | $289.30 | |
| RACEWARE Connecting Rod Bolts and Nuts |
RACEWARE Connecting Rod Bolts Eliminate EXPENSIVE Engine Damage! Unlike original equipment S-t-r-e-t-c-h Bolts that Must be replaced every time your engine is disassembled and RACEWARE Connecting Rod Bolts are a Direct replacement for original factory bolts. Probably it's best characteristics are that RACEWARE Aerospace QUALITY Rod Bolts have a tensile strength of 220,000 PSI and the 12 Point Aircraft Nuts are 100% re-usable.
NOTE: RACEWARE Connecting Rod Bolt Kits come with 12-point Aircraft Nuts. Click here to view the Raceware Fastener Site |
|
| PEL-RTE-4007 | RACEWARE Connecting Rod Bolt Set, Sold As A Complete Set, 944 (1983-89), 924S/944S (1987-88), 944 Turbo (1986-89) [More Info] | $269.95 | |
| RACEWARE Main Bearing Stud Kits |
| In high RPM or high power engines, the Main Crankshaft Bearing Caps can "shuffle" or move around due to high torque loads, thus causing premature engine wear and failure. Race-Tech Engineering, Inc. (RTE) has designed a superior Aerospace Quality Main Bearing Stud Kit for your engine that eliminates Power Robbing bearing cap shuffle and increases overall engine power and reliability. Click here to view the Raceware Fastener Site |
|
| PEL-RTE-2009 | RACEWARE Main Bearing Stud Kit, Sold As A Complete Set Of 8, 944 (1983-89), 924S/944S (1987-88), 944 Turbo (1986-89) [More Info] | $349.95 | |
| PEL-RTE-2010 | RACEWARE Main Bearing Stud Kit, Sold As A Complete Set Of 8, 968 (1992-95) [More Info] | $349.95 | |
Engine Mounts |
| Is your motor shaking like it's at the epicenter of one of those famous Los Angeles earthquakes? Check your motor mounts. Chances are that they are worn, and are causing excess vibration. NOTE: The mounts have been consolidated into 1 mount (turbo mount) for all applications. Please check the photo link for Technical Bulletin. |
|
| Engine Mount, 924S/944/968 All (1983-95), Each |
| 951-375-042-04-M203 | Engine Mount, 924S/944/968 All (1983-95), Each
Brand: Rein Automotive [More Info] |  |
| $123.25 | |
| 951-375-042-04-M253 | Engine Mount, 924S/944/968 All (1983-95), Each
Brand: URO [More Info] | |
| $36.25 | |
951-375-042-04-M270 | Engine Mount, 924S/944/968 All (1983-95), Each
Brand: Corteco [More Info] | |
| $198.50 | |
Billet Aluminum Super Mounts |
These Aluminum Super Mounts have elastomeric inserts that provides vibration isolation, along with superior operational longevity when compared to stock mounts. This engine mount system keeps the drivetrain located in the correct position with proper clearance, and allows you to put the power down where you want it most - at the rear wheels!
The Super Mounts are tried and tested on the street and track in 500+ HP monsters and stock configurations. They do not require shims and need no improvements to install on your vehicle. They are so confident that these high quality SuperMounts will be a permanent engine mount solution, that they offer a Lifetime Warranty that covers material and workmanship to the original customer. |
|
951-375-042-04-SMA | Billet Aluminum Super Mount, Pair, 924S/944/968 All (1983-95) [More Info] | $270.00 | |
Balance Shaft |
| The balance shafts are used to compensate for the fact that the large bore 944 4-cylinder motor creates a lot of vibration. Replace your balance shaft belts if they are worn. If these belts break, your engine will vibrate significantly, and eventually shake apart. |
|
944-102-219-04-M51 | Balance Shaft Belt, 924S/944/968 All (1983-95), Each
Brand: Gates [More Info] | |
| $39.50 | |
944-102-025-07-M40 | Tensioner Roller for Balance Shaft Belt, Toothed, 924S/944/968 All (1983-95), Each
Brand: INA [More Info] | |
| $29.75 | |
944-102-277-06-M40 | Tensioner Roller for Balance Shaft Belt, Idle Roller, 924S/944/968 All (1983-95), Each
Brand: INA [More Info] | |
| $67.00 | |
944-102-209-11-M100 | Crankshaft Drive Gear for Balance Shaft Belt, 924S, 944, 944 Turbo, Each
Brand: Genuine Porsche [More Info] | |
| $61.00 | |
999-113-424-40-M17 | Seal, Right Balance Shaft (30 x 48 x 7), 968, Each
Brand: Victor Reinz [More Info] | |
| $11.25 | |
999-113-425-40-M17 | Seal, Left Balance Shaft (30 x 47 x 7), 968, Each
Brand: Victor Reinz [More Info] | |
| $15.00 | |
999-701-875-40-M100 | Seal, Rear of Balance Shaft (2 per car, sold individually), 944 (1987-89), 944S/S2, 944 Turbo (1987-89), 968
Brand: Genuine Porsche [More Info] | |
| $2.75 | |
928-105-139-02-M260 | Flange for Balance Shaft Seal, 924S, 944S, 944S2, 944 Turbo (from 1989), 968, 944 (from Eng# 43F 06995 1985 Eng# 43F 21203 1985)
for Camshaft Seal and Balance Shaft Seal, 944 (thru Eng# 43F 06994 1985 Eng# 43F 21202 1985), 944 Turbo (through 1988), Each
Brand: OEM [More Info] | |
| $20.75 | |
| 944-102-281-04-OEM | Thrust Washer for Balance Shaft Gear, 2 req, each, 924S/944/944 Turbo/968 all [More Info] | No Longer Available | |
944-101-121-07-M100 | Bearing Half (Rear) for Balance Shaft (2 per shaft, sold individually), 944 (through 1986), 944 Turbo (1986)
Brand: Genuine Porsche [More Info] | |
| $17.75 | |
944-101-121-10-M100 | Bearing Half (Rear) for Balance Shaft (2 per shaft, sold individually), 924S, 944 (from 1987), 944S/S2, 944 Turbo (from 1987), 968
Brand: Genuine Porsche [More Info] | |
| $13.75 | |
944-101-125-02-M100 | Bearing (Front) for Balance Shaft, Standard (1 per shaft), 924S, 944, 944S/S2, 944 Turbo, 968
Brand: Genuine Porsche [More Info] | |
| $13.00 | |
944-102-205-04-M100 | Balance Shaft Gear (2 per car, sold individually), 924S, 944, 944S/S2, 944 Turbo, 968
Brand: Genuine Porsche [More Info] | |
| $25.25 | |
