| Porsche 924S/944/968 Brake Performance Upgrades - Page 1 |
Stainless Steel Brake Hoses |
| Stainless Braided Brake Lines with teflon lining help eliminate "Spongy" brake pedal feel caused by brake hose swelling in conventional lines. We offer non-DOT Stainless Brake Hoses for the "Offroad" crowd and DOT Approved Stainless Brake Hoses for use in both street and track use. NOTE: Stainless Steel Brake Hoses come in a set of four ONLY. Please check your local state laws concerning non-DOT brake hoses. All states require DOT Approved brake hoses for highway use. |
|
 PEL-RP6944 | Stainless Steel Brake Lines Set of Four (Non-DOT), 944 (1983-89), 944 Turbo (1985-87), 968 (1992-95, without Club Sport Option) [More Info] | $59.20 |  |
 PEL-RP6944D | Stainless Steel Brake Lines Set of Four (DOT Approved), 944 (1983-89), 944 Turbo (1985-87), 968 (1992-95, without Club Sport Option) [More Info] | $67.30 |  |
 PEL-RP6951 | Stainless Steel Brake Lines Set of Four (Non-DOT), 944 (1990-91), 944 Turbo (1988-91), 968 (1992-95, with Club Sport Option) [More Info] | $59.20 |  |
 PEL-RP6951D | Stainless Steel Brake Lines Set of Four (DOT Approved), 944 (1990-91), 944 Turbo (1988-91), 968 (1992-95, with Club Sport Option) [More Info] | $70.20 |  |
BHP Performance Brake Pad Sets |
Introducing the XPS line of brake pads from BHP – a true dual-use performance pad applicable for either street or track usage. The practicality of these pads is due to the advanced XPS composite that provides for a high initial bite and maintains a near linear torque curve. Cold and elevated operating temperature performance is only within a 5% range, giving a predictable pedal feel and consistent stopping distances. See the test results for yourself!
The proprietary XPS formulation is a high friction composite with relatively low metallic content. This results in a lower thermal conductivity, which in turn, minimizes overheating of the brake fluid. The XPS formulation is also less destructive to brake discs in severe use, and is more tolerant to cross-drilling of discs than semi-metallic pads.
Brake noise is minimized with an anti-noise shim made from an advanced composite. These composite shims have proven to be the most effective shims available in dampening high frequency vibrations associated with brake squeal. The pads are finished with a Dupont silicone powder-coat that accommodates temperatures of up to 800 °F without degradation. Not only does this preserve its finished appearance, but also prevents corrosion of the backing plates throughout the whole life of the pad.
NOTE: It is recommended that these pads should be used with either freshly turned or brand new brake rotors to minimize the possibility of brake noise. |
|
 BHP-S0877 | BHP Performance Brake Pad Set FRONT - 944 Turbo (1986-88), 944S2/968 REAR - 944 Turbo/944S2/968 all, 928S4 [More Info] | $159.85 |  |
 BHP-S0953 | BHP Performance Brake Pad Set FRONT - 944 Turbo (1989 only), 968 w/ M030, 928S4 [More Info] | $168.05 |  |
Cool Carbon Performance Brake Pads  |
Cool Carbon Performance establishes the new reference in performance braking for street/track and racing formulations. Both Cool Carbon compounds have been developed at German R&D facilities and have been tested extensively on the German autobahn. Cool Carbon Performance brake pads deliver true undiluted performance.
The Street Performance/Track Tuned (S/T) compound is a higher friction level than OE, with much better torque and stopping capability. It is very stable, both cold and hot to temperatures exceeding 600 C (1112 F), due to a special "hollow" ceramic structure that exhibits excellent heat dissipation characteristics. Stainless steel noise shims, bonded to what is already a very quiet formula, ensure virtually no noise under all driving conditions. Improved pedal feel and significantly reduced dust can be expected.S/T compound features: excellent initial bite, consistent torque, stopping ability & temperature stability; very good fade resistance; long life, rotor friendly, low/no dust; virtually without noise; excellent for daily street use and with very good track performance.
NOTE: Pelican Parts recommends replacing both front and rears together due to the unique Cool Carbon formulation that increases in friction level with temperature. This will maintain the best overall front to rear brake balance.
Click here for technical information and the complete Cool Carbon Application Guide. |
|
 CC-7326-D608 | Cool Carbon Performance Brake Pad Set, FRONT, 944S2 (w/o Sport) (1989-91) [More Info] | $137.50 |  |
 CC-7327-D609 | Cool Carbon Performance Brake Pad Set, FRONT, 944S2 (w/Sport Koni's) (1989-91) [More Info] | $144.50 |  |
 CC-7326-D608 | Cool Carbon Performance Brake Pad Set, REAR, 944S2 (1989-91) [More Info] | $137.50 |  |
 CC-7326-D608 | Cool Carbon Performance Brake Pad Set, FRONT, 944 Turbo (1985-88) [More Info] | $137.50 |  |
 CC-7327-D609 | Cool Carbon Performance Brake Pad Set, FRONT, 944 Turbo S (1988-89) [More Info] | $144.50 |  |
 CC-7326-D608 | Cool Carbon Performance Brake Pad Set, REAR, 944 Turbo/Turbo S (1985-89) [More Info] | $137.50 |  |
 CC-7326-D608 | Cool Carbon Performance Brake Pad Set, FRONT, 968 (w/o Sport) (1992-95) [More Info] | $137.50 |  |
 CC-7327-D609 | Cool Carbon Performance Brake Pad Set, FRONT, 968 (w/ Sport) (1992-95) [More Info] | $144.50 |  |
 CC-7326-D608 | Cool Carbon Performance Brake Pad Set, REAR, 968 (w/ OR w/o Sport) (1992-95) [More Info] | $137.50 |  |
Brake Rotor Cooling Kit |
These brake cooling kits funnel air directly to the front rotors. Additionally, each part of the kit is available separately in case you need a replacement or are interested in assembling a custom cooling solution.
The N.E.R.P Cooling Kit features:• Aluminum brake backing plate and associated components have been specifically designed to fit your model. No cutting, drilling, machining. • Light weight, 5-7 oz. Typical per plate. • Flow bench Designed for maximum efficiency. • All high quality components in each kit, from 100% SS hose clamps to 500° F Silicone duct hose. |
|
 PEL-PEOSBPAZK | 944 (Early) Brake Cooling Complete Kit, 944/944S/Turbo (1982-88) [More Info] | $349.80 |  |
|
 PEL-PEOSBPAZL | 944 (Early) Backing Plate, Black Anodized (Left) 6oz, 944/944S/Turbo (1982-88), 6oz [More Info] | $115.00 |  |
 PEL-PEOSBPAZR | 944 (Early) Backing Plate, Black Anodized (Right) 6oz, 944/944S/Turbo (1982-88), 6oz [More Info] | $115.00 |  |
 PEL-PFSTBPAZL | 944 (Late) Backing Plate, Black Anodized (Left), 944S2 with M030 (1989-91), 944 Turbo (1989-91), 6oz [More Info] | $125.00 |  |
 PEL-PFSTBPAZR | 944 (Late) Backing Plate, Black Anodized (Right), 944S2 with M030 (1989-91), 944 Turbo (1989-91), 6oz [More Info] | $125.00 |  |
 PEL-MNOOFSOZN | Debris Screen, for 2.5-inch Diameter Hose [More Info] | $15.60 |  |
 PEL-MOOOCHOZN | Silicone Hose 2.5" X 14.5", 500 deg F [More Info] | $11.95 |  |
| PEL-MOOOBHOZN | Silicone Hose 2.5" (Bulk Hose, Priced per each 11-feet), 500 deg F [More Info] | $92.85 |  |
 PEL-MAOOSCOZN | Polyethelene Scoop, for 2.5-inch Hose Diameter [More Info] | $40.00 |  |
 PEL-MOOOSCPKN | Scoop for 2.5-inch or 3-inch Hose Diameter [More Info] | $16.50 |  |