Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

 
- Back to Catalog -
Brake Pads
Genuine Porsche Brake Pads
Front Brake Pads
Rear Brake Pads
Metal-Master Brake Pads
Brake Pads - Sport
BHP Performance Brake Pad Sets
Brake Pad Wear Sensors
Front Brake Pad Sensors
Rear Brake Pad Sensors
Brake Pad Retainer Kits
Front Brake Pad Retainer Kits
Rear Brake Pad Retainer Kits
Brake Rotor Cooling Kit
Brake Rotors
Front Brake Rotors
Rear Brake Rotors
High Performance Drilled Brake Rotors
- Back to Catalog -
Home >  924S/944/968Brakes >   Porsche 924S/944/968 Brake Pads & Rotors 
Porsche 924S/944/968 Brake Pads & Rotors - Page 2

Brake Pads

Metal-Master Brake Pads
Metal-Master brake pads are a popular replacement for the OEM brakes. If you are unhappy with the OEM pads for reasons of brake noise or too much brake dust, then try replacing them with the Metal-Master pads.
PEL-BP-2518M

Metal-Master Rear Brake Pad Set, 944 Turbo (1986-88, With Club Sport Option), 968 (1991-95, With Club Sport Option)

$27.55

Brake Pads - Sport

BHP Performance Brake Pad Sets
Introducing the XPS line of brake pads from BHP – a true dual-use performance pad applicable for either street or track usage. The practicality of these pads is due to the advanced XPS composite that provides for a high initial bite and maintains a near linear torque curve. Cold and elevated operating temperature performance is only within a 5% range, giving a predictable pedal feel and consistent stopping distances. See the test results for yourself!

The proprietary XPS formulation is a high friction composite with relatively low metallic content. This results in a lower thermal conductivity, which in turn, minimizes overheating of the brake fluid. The XPS formulation is also less destructive to brake discs in severe use, and is more tolerant to cross-drilling of discs than semi-metallic pads.

Brake noise is minimized with an anti-noise shim made from an advanced composite. These composite shims have proven to be the most effective shims available in dampening high frequency vibrations associated with brake squeal. The pads are finished with a Dupont silicone powder-coat that accommodates temperatures of up to 800 °F without degradation. Not only does this preserve its finished appearance, but also prevents corrosion of the backing plates throughout the whole life of the pad.

NOTE: It is recommended that these pads should be used with either freshly turned or brand new brake rotors to minimize the possibility of brake noise.

BHP-S0877

BHP Performance Brake Pad Set
FRONT - 944 Turbo (1986-88), 944S2/968
REAR - 944 Turbo/944S2/968 all, 928S4    [Photo] [Photo]

$159.85

BHP-S0953

BHP Performance Brake Pad Set
FRONT - 944 Turbo (1989 only), 968 w/ M030, 928S4    [Photo]

$168.05

Brake Pad Wear Sensors

Late model 944s (1985 and later) were equipped with handy brake pad wear sensors that detect when the pads are worn down. Make sure that your sensors are working properly and make sure that you don't damage your rotors, or create unsafe driving conditions. It's cheap insurance against brake failures. NOTE: Some performance brake pads do not have provisions for wear sensors like original pads do.
Front Brake Pad Sensors
944-612-211-00-M163

Front Brake Pad Sensor, 944 (1983-01/85), 944 Turbo (1986), Each
   Brand: PEX    [Photo] [Photo]

$7.25
944-612-211-02-M163

Front Brake Pad Sensor, 944 (02/85-86), Each
   Brand: PEX    [Photo]

$7.25
944-612-212-00-M163

Front Brake Pad Sensor, 944 (1987-89), 944S (1987-89), Each
   Brand: PEX    [Photo] [Photo]

$7.75
Rear Brake Pad Sensors
944-612-211-01-M163

Rear Brake Pad Sensor, 944 (1983-86), 944 Turbo (1986), Each
   Brand: PEX    [Photo]

$8.00
944-612-212-01-M163

Rear Brake Pad Sensor, 944 (1987-89), 944S (1987-89), Each
   Brand: PEX    [Photo]

$6.00
951-612-212-00-M163

Brake Pad Sensor, For Front and Rear, 2 Per Car, 944 Turbo (1987-88), Each
   Brand: PEX    [Photo]

$13.25
944-612-365-01-M163

Brake Pad Sensor, For Front and Rear, 2 Per Car, 944 Turbo (1989), 944S2 (1989-91), 968 (1992-95), Each
   Brand: PEX    [Photo] [Photo]

$9.50
928-612-361-00-M100

Brake Pad Sensor Retaining Clip, All, As Needed, Each
   Brand: Genuine Porsche    [Photo] [Photo]

$4.00

Brake Pad Retainer Kits

Missing a spring clip to hold in your brake pads? Want to replace your worn or cracked pad retaining clips? These kits contain the following: Brake Pad Pins, Retainer Clips, Pad Tensioner Spring Clips and contain parts for both left and right calipers.
Front Brake Pad Retainer Kits
477-698-163-OEM

Front Brake Pad Retainer Kit, 924/Turbo Without M471 Package (1977-82)
   Brand: Genuine Porsche

$11.50
944-351-952-01-M4

Front Brake Pad Retainer Kit, 924/Turbo With M471 Package (1977-82), 944 (1983-88), 944S (1987-88), 924S (1987-88)
   Brand: Ate    [Photo] [Photo]

$61.25

  Page 2 of 4  <1234>

        

  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2008, Pelican Parts Inc.