| Porsche 928 Pistons, Heads & Valves - Page 3 |
Valve Cover Gaskets and Hoses |
| If keeping your engine compartment free of oil, then replacing your valve cover gaskets and hoses should be a top priority! Make sure that you use fresh ones whenever you remove the top cover. |
|
928-104-447-06-M17 | Valve Cover Gasket, 928 (1985-86)
Brand: Victor Reinz [Photo] |  |
| $22.50 |  |
928-104-447-09-M208 | Valve Cover Gasket, 928 (1987-95)
Brand: Gloeckler [Photo] | |
| $19.75 | |
| 928-107-445-00-OEM | Valve Cover Hose, 928 (1985-86)
Brand: Genuine Porsche | $42.25 | |
928-107-445-02-M100 | Valve Cover Hose, 928 (1987-95)
Brand: Genuine Porsche [Photo] | |
| $26.00 | |
928-104-115-02-M208 | Rubber Grommet for Valve Cover Bolt, 928 (from 1987) (26 per car, sold per each)
Brand: Gloeckler [Photo] | |
| $1.00 | |
| 928-104-116-00-OEM | Thrust Washer for Valve Cover Bolt, 928 (from 1987) (26 per car, sold per each)
Brand: Genuine Porsche | $1.25 | |
Intake Valves  |
| Whether you use the original OEM valves or aftermarket stainless steel ones, you will get plenty of life and miles out of new valves on a rebuild. Make sure that you check the valve dimensions on used intake valves. |
|
| 928-105-413-00-OEM | Valve Intake 8 req, 928 (1978-84)
Brand: Genuine Porsche | $119.75 | |
| 928-105-641-01 | Valve Intake 16 req, 928 (1985-86)
Brand: TRW | $18.75 | |
928-105-641-05-M80 | Valve Intake 16 req, 928 (1987-On)
Brand: TRW [Photo] | |
| $22.00 | |
Exhaust Valves |
| Whether you use the original OEM valves or aftermarket stainless steel ones, you will get plenty of life and miles out of new valves on a rebuild. Make sure that you check the valve dimensions on used exhaust valves. |
|
| 928-105-417-03-OEM | Valve Exhaust 8 req, 928 (1978-84)
Brand: Genuine Porsche | $116.75 | |
928-105-410-04-M154 | Exhaust Valve, 928 (1980-85) Euro
Brand: Intervalves [Photo] | |
| $44.00 | |
| 928-105-642-01 | Valve Exhaust 16 req, 928 (1985-86)
Brand: TRW | $40.50 | |
928-105-642-06-M80 | Valve Exhaust 16 req, 928 (1987-88)
Brand: TRW [Photo] | |
| $29.75 | |
Valve Guides |
| You should always replace your guides when rebuilding your heads. The newer style valve guides are highly reliable, reduce friction and wear, and they look real cool too. |
|
928-104-328-51-M105 | Valve Guide 16 req, 928 (1978-84)
Brand: Canyon [Photo] | |
| $5.25 | |
| Valve Guide Seal, 928, 2 Valve |
928-104-193-12-M30 | Valve Guide Seal, 928, 2 Valve
Brand: Elring Klinger [Photo] | |
| $2.25 | |
928-104-193-12-M213 | Valve Guide Seal, 928, 2 Valve
Brand: D P H [Photo] | |
| $2.00 | |
|
928-104-601-07-M42 | Valve Guide Seal, 928, 4 Valve
Brand: Goetze [Photo] | |
| $3.75 | |
