Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

 
- Back to Catalog -
Brake Rotors
Front Brake Rotors
Rear Brake Rotors
Brake Pads
Metal-Master Brake Pads
High Performance Brake Pad Sets
Mintex C-Tech Brake Pads
Pagid Racing Brake Pad Sets
Brake Pad Sensors
Brake Pad Damping Plates
ABS Sensors
Brake Shoes
- Back to Catalog -
Home >  928 (1978-95)Brakes >   Porsche 928 Brake Pads & Rotors 
Porsche 928 Brake Pads & Rotors - Page 2

Brake Pads

Metal-Master Brake Pads
Metal-Master brake pads are a popular replacement for the OEM brakes. If you are unhappy with the OEM pads for reasons of brake noise or too much brake dust, then try replacing them with the Metal-Master pads.
PEL-BP-2518M

Metal-Master Rear Brake Pad Set, 928S/S4 (1992-95)

$27.55

High Performance Brake Pad Sets

Mintex C-Tech Brake Pads
Mintex C-Tech M1144 is the material for fast road use as well as light competition such as karting, hill climb and single seater racing cars. One of the main characteristics of this material is the ability to work from cold, which gives the user the confidence of a standard material on the first application of the brakes. The benefit of M1144 is experienced as the temperature within the brakes starts to increase. M1144 will remain stable and consistent through to 450C where a standard material at this temperature will most certainly start to fade. The bedding in procedure for M1144 is the same as any standard material i.e. steady braking for the first 50 miles, avoiding emergency stops. All M1144 pads are supplied with fully branded C-Tech anti noise shims and a C-Tech sticker.

944-351-951-02-M168

M1144 Front Brake Pad Set, 928 (1978-81)
   Brand: Mintex C-Tech    [Photo]

$28.25
Pagid Racing Brake Pad Sets
The Pagid Orange RS 4-4 compound has a very good fade resistance and a higher average friction value than the RS 4-2 (Blue). It is rotor friendly with predictable, non-aggressive friction behavior (stable torque). Fading resistance up to 560°C (1.050°F). It is a very good rear compound for Touring Car applications in combination with RS 14 front pads. Its main application is Porsche 911 racing. It is used on either Short Track or Long Distance; also for front and rear axles. It is also used on BMW Showroom Stock, all other Touring-Cars and Single-Seater up to F3.

99-5541-532-M473

RS 4-4 Front Brake Pad Set, 928S/S4 (1986 Ch# 92GS861000 -91)
   Brand: Pagid Racing    [Photo]

$274.75

99-5541-534-M473

RS 4-4 Front Brake Pad Set, 928S/S4 (1992-95)
   Brand: Pagid Racing    [Photo]

$320.25

99-5541-531-M473

RS 4-4 Rear Brake Pad Set, 928S/S4 (1986 Ch# 92GS861000 -95)
   Brand: Pagid Racing    [Photo]

$260.75
The Pagid Black RS 14 compound is a medium high friction value ceramic type compound with very good modulation, high fade resistance, low heat conductivity, and a good wear rate up to a temperature of 650°C (1.200°F). It is kind on discs, with visible grooving, but a limitation of hairline cracks. Applications: NASCAR, CART, F3, Touring cars, GT cars, WSC, Trans Am and Rally.

99-5541-632-M473

RS 14 Front Brake Pad Set, 928S/S4 (1986 Ch# 92GS861000 -91)
   Brand: Pagid Racing    [Photo]

$291.00

99-5541-634-M473

RS 14 Front Brake Pad Set, 928S/S4 (1992-95)
   Brand: Pagid Racing    [Photo]

$341.50

99-5541-631-M473

RS 14 Rear Brake Pad Set, 928S/S4 (1986 Ch# 92GS861000 -95)
   Brand: Pagid Racing    [Photo]

$260.75

Brake Pad Sensors

928s were equipped with handy brake pad wear sensors that detect when the pads are worn down. Make sure that your sensors are working properly and make sure that you don't damage your rotors, or create unsafe driving conditions. It's cheap insurance against brake failures. NOTE: Some performance brake pads do not have provisions for wear sensors like original pads do.
928-612-311-00-OEM

Front Brake Wear Sensor, 2 req, 928 (1978)
   Brand: Genuine Porsche

$126.00

928-612-311-03-M163

Front Brake Wear Sensor, 2 req, 928 (1978-81)
   Brand: PEX    [Photo]

$13.00

928-612-315-01-M163

Front Brake Wear Sensor, 2 req, 928 (1982-86 Ch# 92GS860999)
   Brand: PEX    [Photo]

$11.00

928-612-315-02-M163

Front Brake Wear Sensor, 2 req, 928 (1986 Ch# 92GS861000 -95)
   Brand: PEX    [Photo]

$9.50
928-612-313-00-OEM

Rear Brake Wear, 2 req, 928 (1978)
   Brand: Genuine Porsche

$105.75

928-612-313-01-M163

Rear Brake Wear, 2 req, 928 (1978-86 Ch# 92GS860999)
   Brand: PEX    [Photo]

$9.25

928-612-313-02-M163

Rear Brake Wear, 2 req, 928 (1986 Ch# 92GS861000 -95)
   Brand: PEX    [Photo]

$9.50

  Page 2 of 3  <123>

        

  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2008, Pelican Parts Inc.