| Porsche 914 Enhancements - Page 3 |
Hella H4 Halogen Headlamp Upgrade Kit  |
| These lamps are one of the most popular upgrades to the 914. Replace your dim standard headlamps with high powered halogen Hella lamp assemblies. Guaranteed to melt holes in the plastic bumpers of the Honda in front of you! Combined with a uniquely formed lens, the newer lamps give you more than triple the light than the stock tungsten sealed lamps. Kit ships with 2 headlamps with 55/60W H-4 bulbs; 100 watt bulbs available as well for faster, more efficient bumper melting. |
|
| 70476-M44 | Hella H4 Halogen Headlamp Upgrade Kit, 2 req per car, Each
Brand: Hella |  |
| $59.00 |  |
| 55-8821-155-M44 | Optional 55W/100 bulb, ea | |
| $10.25 | |
High Power Headlamp Relay |
| It is recommended to install a high powered relay in order to safeguard against current overload and fuse blow-outs. Adding the relay guarantees that current is going directly to the headlamps. |
|
| High Power Headlamp Relay |
141-951-253-B-M5206 | High Power Headlamp Relay
Brand: Wehrle - Por [Photo] | |
| $5.50 | |
141-951-253-B | High Power Headlamp Relay
Brand: Meyle [Photo] | $4.00 | |
Hood Lights |
| These reproduction Cibie hood lights will look perfect on your Porsche 911 or 914. These are highly accurate reproductions with all the correct markings. They are also fitted with a rubber grommet on the back of the reflector that was used by Marchal on their lights and two rubber gaskets in case you do not want to attach the lamps directly to the bodywork. Screws and lens retaining plate are made of stainless steel. The body is made of metal. The pictures say it all. Only have to be painted in the color of your car to match. |
|
PEL-CIB-REP | Cibie Hood Lights (Reproduction), Pair. 911 (1965-89), 912 (1965-69), 914 [Photo] [Photo] | $595.00 | |
Craneฎ XR700 Ignition |
| This electronic ignition unit is sometimes referred to as the industry upgrade standard. The Allison/Crane unit works on an optical light sensor and detector, and eliminates the need for dwell adjustment. Once the engine timing is set, it should hold for an extended period of time. The result is better performance, and better fuel efficiency, as you can be assured that your car is running at peak performance. Crane/Allison systems are bolt-in replacements and can be used easily with the stock ignition system. Installs in less than 1 Hour. Pelican Recommended among electronic ignition systems. click here to visit the Crane Ignition website. |
|
PEL-IM700-0231 | Crane XR700 Fireball System For Use With Stock Bosch Distributor, 914 1.7/1.8/2.0 (1970-76), Each [Photo] | $134.55 | |
PEL-IM700-0226 | Crane XR700 Fireball System For Use with Bosch 009 Or 050 Distributor, 914 1.7/1.8/2.0 (1970-76), Each [Photo] | $134.55 | |
| Crane Points Conversion For 914-6 Owners |
| Those of you who have a 914-6 with the factory capacitive discharge ignition (C/D) box are in luck. You can change out the point set with an electronic pickup and still have the benefits of your original C/D unit and keep your tachometer operational. |
|
PEL-SW715-0020 | Crane Optical Pickup Trigger For Cars With C/D ignition, 914-6 (1970-72), Each [Photo] | $57.60 | |
PEL-SW700-2231 | Crane Installation Kit For Above Pickup, 914-6 (1970-72), Each [Photo] | $41.90 | |
Craneฎ XR3000 Ignition |
| XR3000 is the high performance version of the XR700. It also is 50 States Legal and very easy for the DIY to install with immediate results. The most obvious benefits are: All new status LED light for easy diagnostics, 150% greater spark gap energy over stock points ignition, Uses a high output coil without ballast resistor and an Optical trigger for precise ignition timing accuracy. This kit converts points type distributor to electronic ignition and is fully sealed for protection from dirt, moisture and vibration. SMT (Surface Mount Technology) is utilized for reduced size and greater reliability at the same time offers Short circuit protection. NOTE: LX91 E-coil is recommended for use with this kit as the Bosch Blue coil has an internal ballast resistor which cannot be used with the XR3000 ignition. Must use part number PEL-SW730-0891 Coil Wire Kit shown below. |
|
PEL-UN6552310 | Crane XR3000 Fireball System For Use With Stock Bosch Distributor, 914 1.7/1.8/2.0 (1970-76), Each [Photo] | $134.55 | |
PEL-SW3000-0226 | Crane XR3000 Fireball System For Use with Bosch 009 Or 050 Distributor, 914 1.7/1.8/2.0 (1970-76), Each [Photo] | $168.45 | |
| Crane LX91 E-Core Coil |
| Highest possible spark energy and spark gap current up to 100% greater than comparable OE coils and 70% greater than MSDฎ Blasterฎ coil. Recommended coil for street use with Crane HI-6, Malloryฎ Hyfireฎ, MSD 6ฎ CD systems. Also works great with Crane DMSI, HI-6S, XR3000 inductive discharge ignitions. Not for use in race or extended high RPM use with high output ignition. Not for use with points. For 1995 and earlier non-OBD II applications. CARB E.O. D-225-60. NOTE: Must use part number PEL-SW730-0891 Coil Wire Kit shown below. |
|
PEL-SW730-0891 | Crane LX91 E-Core Coil, 914 1.7/1.8/2.0 (1970-76), Each [Photo] | $69.50 | |
