| Porsche 914 Tools - Page 4 |
CV Bolt Removal Tool |
Avoid stripping your bolt heads and spending wasted hours cutting and grinding them off by using this special tool to easily remove those pesky CV joint bolts. This tool is for use with 12-point star-shaped bolts only. Please make sure to check your bolts before ordering. It's common for previous owners to replace the 12-point star shaped bolts with more standard allen head bolts instead. Although the 12-point pattern allows you to get a better grip on the bolts (with the correct tool), and apply the high torque that the bolts require, previous owners may have stripped out these bolt heads by attempting to use a torx or hex driver instead of the proper tool. A word of caution here - these other tools MAY work, but if they strip the bolt head, then you are in for an entire afternoon of grinding it off the next time it's replaced.
TIP: Spray the bolts down with WD-40 or Liquid Wrench first to loosen the dirt and debris in the bolt head, then scrape out any dirt that may be left. With the socket on a 6" extension, slip the tool into the bolt head and give it a gentle rap on the end with a mallet to seat it firmly. Following this simple procedure will hopefully avoid you from stripping any CV bolts. |
|
TOL-SK45438 | CV Joint Bolt Removal Tool - 8mm, 12-point Socket Driver, 3/8 in. drive [Photo] [Photo] | $12.75 |  |
Magnetic Box "V" Wrench (17mm) |
| This unique-looking tool is used to aid in the removal of the engine/transmission bolts. The V-Wrench holds the nut on the other side of the engine compartment so that you can remove the nut from the transmission. The V design holds the nut steady, unlike a normal wrench, and allows you to remove the bolt on the other side without the help of an assistant. |
|
PEL-TOL-P222 | Magnetic Box "V" Wrench (17mm) [Photo] | $33.00 | |
Suspension Alignment Tools |
| Doing some adjustments to your suspension? Using the right tools can help you obtain exactly the values that you are looking for. |
|
PEL-TOL-P221 | Rear Suspension Toe-In Adjuster, 911 All [Photo] | $28.00 | |
PEL-TOL-P235 | Camber Adjuster, 911, C2 and C4 [Photo] | $21.00 | |
Ride Height Wrench |
| don't be without this Ride Height Combination Wrench went setting up your suspension! Fits the spring plate eccentric 24mm and 36mm bolts. Powder coated for a long lasting finish. |
|
PWE-2436RHW | Ride Height Combination Wrench, 911 1977-89 [Photo] | $30.70 | |
Extraction Tools |
| Nothing beats the frustration of trying to remove something that isn't going anywhere. Do the job right by using the right tools to remove that gear or bushing. These pullers are designed to properly remove what they were designed to remove, without damaging anything else. |
|
PEL-TOL-P229 | Distributor Drive Gear Puller, 912, 914, 356 [Photo] | $24.20 | |
PEL-TOL-P236 | Oil Piston Pressure Relief Valve Puller, 912, 914, 356 [Photo] | $29.00 | |
PEL-TOL-P239 | Starter Bushing Puller, 12V [Photo] | $33.00 | |
PEL-TOL-P238 | Starter Bushing Puller, 6V [Photo] | $33.00 | |
PEL-4491B | Oxygen Sensor Removal Tool, 22mm, 3/8" drive [Photo] | $23.00 | |
Spanner Wrench Set |
| This four piece spanner wrench set includes the sizes 27mm, 30mm, 32mm, 36mm, and is most useful for various repairs on your car. |
|
PEL-TOL-P242 | Spanner 4 Wrench Set, 911, 930, 914-6, 944, 968, 27mm, 30mm, 32mm, 36mm [Photo] | $63.00 | |
32 MM Oil Line Wrench |
| This oil line wrench is specifically designed for the 944 equipped with 32mm oil line fittings. Manufactured from Chrome-Vanadium Steel for corrosion resistance and years of reliable service. |
|
| PEL-PP902843 | 944 32 MM Oil Line Wrench | $26.95 | |
