| Porsche 914 Intake System - Page 2 |
Cold Start Valve Gaskets |
| This is the gasket for the cold start valve |
|
022-133-075A-OEM | Cold Start Valve Gasket, 914 1.7 (1970-73), 914 1.8L (1974-75), Each [More Info] | $5.00 |  |
Temperature Sensors |
| This sensor, sometimes referred to as temperature sensor I, measures the temperature of the outside air in order to best adjust the fuel mixture for warming up the car. |
|
311-906-081A-OEM | Temperature Sensor for Air Intake, 914 1.7/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
Thermotime Switches |
| This switch, mounted on the engine, is used to control the operation of the cold start valve. |
|
311-906-161C-OEM | Thermotime Switch, 914 1.7/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
| 928-605-101-00-OEM | Thermotime Switch, 914 1.8 (1974-75), Each
Brand: Genuine Porsche [More Info] | $105.50 | |
Intake Manifold Gaskets  |
| The most common cause of fuel injection problems on the 914 is vacuum leaks. Lean running, rough or surging idle, or the occasional mis-fire may be caused by leaking manifold gaskets. It's a good idea to replace them when doing a complete fuel injection overhaul. |
|
022-129-707F | Intake Manifold Gasket (2 per car, sold individually), 914 1.7/1.8 (1970-75), each
Brand: Reinz [More Info] | $7.50 | |
| 039-129-707-M17 | Intake Manifold Gasket (2 per car, sold individually), 914 2.0 (1973-76), Each
Brand: Victor Reinz [More Info] |  |
| $9.50 | |
Throttle Body Gaskets |
| Another possible point of vacuum leaks is the small gasket that goes from the throttle body to the air plenum. Replace these gaskets whenever the throttle body is removed from the car. |
|
| 022-133-073-OEM | Throttle Body Gasket, Rubber, 914 1.7 (1970-73), each
Brand: Genuine Porsche [More Info] | No Longer Available | |
PEL-914TBG | Throttle Body Gasket, Rubber, 914 2.0 (1973-76), each
Brand: Aftermarket [More Info] | $5.00 | |
| 022-133-073A-OEM | Throttle Body Gasket, Rubber, 914 1.8 (1974-75), each
Brand: Genuine Porsche [More Info] | No Longer Available | |
Vacuum Hose |
| One of the most overlooked causes of fuel injection problems are cracked and leaking vacuum hoses. To ensure that your car will run well, you should replace these often to avoid troublesome headaches. Priced and sold by the meter. |
|
| N-020-353-5-M5021 | 3.5mm ID, 7.5mm OD (quantity as needed, priced per meter)
Brand: Contitech - Porsche [More Info] | |
| $4.50 | |
073379-005201-M21 | 5mm ID, 10mm OD (quantity as needed, priced per meter)
Brand: Contitech [More Info] | |
| $6.50 | |
| N-020-357-1-M21 | 7mm ID, 12mm OD (quantity as needed, priced per meter)
Brand: Contitech [More Info] | |
| $6.75 | |
N-020-376-1-M21 | 9mm ID, 14mm OD (quantity as needed, priced per meter, sold in one meter sections) [More Info] | |
| $8.75 | |
| N-020-290-1-M21 | 12mm ID, 17mm OD (quantity as needed, priced per meter)
Brand: Contitech [More Info] | |
| $11.25 | |
| N-020-371-1-M21 | 14mm ID, 17mm OD (quantity as needed, priced per meter)
Brand: Contitech [More Info] | |
| $10.25 | |
