|  | | | Porsche 914 Pistons, Cylinders, and Heads - Page 1 | Piston/Cylinder Sets  | | Piston/Cylinder Sets - 914 2.0L | | Rebuilding your engine is a process that should be done right. For the most reliable of rebuilds, replace your pistons and cylinders with new ones. If you are reusing your old ones, make sure that you have them checked at a good machine shop to make sure that the ring grooves are not worn. Also, the inside of the cylinders should be honed. Failure to do so may result in a new set of rings not seating properly. Our original New German pistons and cylinders come complete with wrist pins and clips. The European pistons have a higher compression ratio resulting in about a 6% increase in horsepower. For more info on the differences between the USA and European Pistons, see our Q&A section. All piston sets come complete with rings, wrist pins, and clips. |
| | 039-198-075A-OEM | Piston-Cylinder Complete Set, 94mm USA Spec (7.6:1 Compression), 914 2.0 (1973-76), 1 set per car
Brand: Genuine Porsche | No Longer Available | | 
99-0174-917-SET | Piston-Cylinder Set of 4 (not available individually), 94mm Euro Spec (8.0:1 Compression), 914 2.0 (1973-76)
Brand: Mahle [Photo] | $1435.00 |  | | Piston/Cylinder Sets - 914-4 1.7L & 1.8L | 
022-198-075-M232 | Piston-Cylinder Set (set of 4), 90mm Domed, (8.2:1 Compression), 914 1.7 (1970-73)
Brand: AA [Photo] |  |
| $314.50 | | | 022-198-075A | Piston-Cylinder Set, 93mm, 914 1.8 (1974-76) | No Longer Available | | | Piston/Cylinder Sets - 914-6 | | A-103-903-01 | Piston/Cylinder Set, 914-6, (1970-72), Each
Brand: Genuine Porsche | No Longer Available | | LN Engineering's Nickies Cylinders | LN Engineering's Nickies cylinders look great and perform even better. They are machined out of a specially extruded alloy that is up to 50% stronger, 45% more thermally conductive, and much less brittle than the alloys used by Mahle for cast factory cylinders. With 6.5 fins per inch versus the typical 4 fins per inch on cast cylinders, a phenomenal 60% increase of surface area is achieved providing improved heat transfer. Nickel-silicon-carbide (known as Nikasil), which has a reputation for providing hundreds of thousands of miles of worry-free service, adheres excellently to this alloy, giving top-notch reliability. The finished product is media blasted and acid etched to roughen the surface, further increasing cooling ability by increasing air turbulence. All of these improvements and they weigh less too! Why go back to factory when you can build a cooler-running and more durable engine instead!
NOTE: ARP or RACEWARE high-strength head studs are strongly recommended for use with Nickies. Pistons and hardware sold separately. Most orders are custom built and will take 6-8 weeks for delivery. For more information about Nickies, visit the manufacturer here. |
| | LN-101-905 | LN Engineering Nickies Cylinders, set of 4, Type-4, 90.5mm, slip fit, 914, 912e, VW | $2049.00 | | | LN-101-93 | LN Engineering Nickies Cylinders, set of 4, Type-4, 93mm, slip fit, 914, 912e, VW | $2049.00 | | | LN-101-94 | LN Engineering Nickies Cylinders, set of 4, Type-4, 94mm, slip fit, 914, 912e, VW | $2049.00 | | | LN-101-95 | LN Engineering Nickies Cylinders, set of 4, Type-4, 95mm, slip fit, 914, 912e, VW | $2049.00 | | | PEL-LN-101-96 | LN Engineering Nickies Cylinders, set of 4, Type-4, 96mm, slip fit, 914, 912e, VW | $2049.00 | | | LN-101-98U | LN Engineering Nickies Cylinders, set of 4, Type-4, thickwall 98mm, 914, 912e, VW | $2049.00 | | | LN-101-100U | LN Engineering Nickies Cylinders, set of 4, Type-4, thickwall 100mm, 914, 912e, VW | $2049.00 | | | LN-101-102 | LN Engineering Nickies Cylinders, set of 4, Type-4, thickwall 102mm, 914, 912e, VW | $2049.00 | | | PEL-LN-101-103 | LN Engineering Nickies Cylinders, set of 4, Type-4, std. 103mm, 914, 912e, VW | $2049.00 | | | LN-101-100L | LN Engineering Nickies Cylinders, set of 4, Type-4, thickwall extra-long 100mm (3.900" head to deck, 5.250" overall), 914, 912e, VW | $2082.00 | | | LN-101-102L | LN Engineering Nickies Cylinders, set of 4, Type-4, thickwall extra-long 102mm (3.900" head to deck, 5.250" overall), 914, 912e, VW | $2082.00 | | | LN-101-103L | LN Engineering Nickies Cylinders, set of 4, Type-4, thickwall extra-long 103mm (3.900" head to deck, 5.250" overall), 914, 912e, VW | $2082.00 | | | LN-101-105 | LN Engineering Nickies Cylinders, set of 4, Type-4, std. 105mm, 914, 912e, VW | $2049.00 | | | LN-101-105L | LN Engineering Nickies Cylinders, set of 4, Type-4, thickwall extra-long 105mm (3.900" head to deck, 5.250" overall), 914, 912e, VW | $2082.00 | |
| |
|
|
|
