| Porsche 914 Main Engine Components - Page 2 |
Engine Gasket Sets and Seals  |
| Worried about engine leaks? Is your garage becoming a worthy candidate for an EPA Superfund clean-up project? Seal your engine's fate with our rebuild gasket sets. Our gasket sets contain all of gaskets that you need to rebuild your engine, except the pulley or flywheel seals, and the lower windage seals on the 2.0L engine. You will need to purchase these gaskets separately. |
|
10-0904-107-M17 | Engine Gasket Set, Does Not Include Flywheel Seal Or Pulley Seal, 914 1.7 (1970-73)
Brand: Victor Reinz [More Info] |  |
| $41.50 |  |
10-0904-108-M17 | Engine Gasket Set, Does Not Include Flywheel Seal Or Pulley Seal, 914 1.8 (1974-75)
Brand: Victor Reinz [More Info] | |
| $52.50 | |
039-198-009-M17 | Engine Gasket Set, Does Not Include Flywheel Seal Or Pulley Seal, 914 2.0 (1973-76)
Brand: Victor Reinz [More Info] | |
| $54.50 | |
021-105-247A-M204 | Pulley Seal, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Kaco [More Info] | |
| $6.00 | |
029-105-245B-M30 | Flywheel Seal/Rear Main Seal, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Elring Klinger [More Info] | |
| $9.75 | |
Cooling Fans |
| Has your impeller (fan) been damaged by an overzealous mechanic or previous owner who tried to spin the engine using a screwdriver? You should never try to rotate the engine with the impeller fan blades. Instead, jack up one wheel while leaving the other one on the ground. For more information on this procedure, see our Technical Article, 914 Valve Adjustment Made Easy. Stay cool with excellent condition new, used and refurbished impeller fans for replacement in your motor. |
|
| 021-119-031AD-OEM | Fan Impeller, New, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | $391.50 | |
| 021-119-125-A-OEM | Sealing Ring for Fan Impeller, 914-4
Brand: Genuine Porsche [More Info] | $4.25 | |
Thermostats |
| Be cooler than all your friends by owning a new thermostat! The thermostat is connected to a cable, which in turn opens and closes vents in the impeller housing, thus regulating the amount of cool air that flows across the cylinders and the oil cooler when the car is warming up. A proper operating thermostat is essential for engine longevity in a cold climate. |
|
021-119-159A-OEM | Thermostat, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
021-119-751-OEM | Control Cable for Thermostat, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | $6.00 | |
Motor Mounts |
| These are often cracked and deteriorated on most 914s. Bad motor mounts can cause troublesome shifting problems and add to the vibration in the car. Keep the shakes down by easily replacing your old motor mounts. Just place a jack under the engine, and remove the bar and the motor mounts. Note that the 1970-72 914 can also use the 911 Sport Mount as replacements for the original motor mounts. |
|
| 914-375-035-00-OEM | Motor Mount, Front, 2 Per Car, 914 1.7 (1970-72), Each
Brand: Genuine Porsche [More Info] | $127.25 | |
039-199-231-M260 | Motor Mount, Front, 2 Per Car, 914 1.7/1.8/2.0 (1973-76), Each
Brand: OEM [More Info] | |
| $19.50 | |
| 911 Sport Mount, Can Be Used On 914-4 Front, 2 Per Car, 914 1.7 (1970-72), Each |
911-375-043-07-M203 | 911 Sport Mount, Can Be Used On 914-4 Front, 2 Per Car, 914 1.7 (1970-72), Each
Brand: Rein Automotive [More Info] | |
| $23.75 | |
911-375-043-07-M127 | 911 Sport Mount, Can Be Used On 914-4 Front, 2 Per Car, 914 1.7 (1970-72), Each
Brand: German [More Info] | |
| $26.25 | |
| JWest Engineering's selection of solid motor mounts translate into better handling, more accurate shifting, and overall higher performance. However, note that this may also produce a slightly rougher ride, as the engine is no longer highly insulated from the chassis by the rubber mounts. |
|
JWST-914-MMAL | Motor Mounts for 914-4 (Aluminum), sold as pair with new hardware
Brand: JWest [More Info] | No Longer Available | |
JWST-914-MMNL | Motor Mounts for 914-4 (Hard Nylon), sold as pair with new hardware
Brand: JWest [More Info] | $30.00 | |
| WEVO Semi-Solid Engine/Transmission Mounts |
This mount is designed specifically for the transmission mount duty on the 914, the body design is NOT the same as 911 engine mounts. Often substituted, the 914 transmission mounts are a unique hanging design that the WEVO body component is designed to suit.
The slotted holes allow for easy "pre-load free" installation, or to accommodate your distorted mounts where 911 engine mounts have previously been bolted up. Aluminum, Urethene and Stainless steel construction. The elastomer pillows and their configuration is shared with the successful WEVO SS Engine Mount originally designed for the 911. Silver only. |
|
WVO-SSEM-914-BLU | WEVO 914 Semi-Solid Engine Mount, BLUE PILLOWS, each, 914 all [More Info] | $87.50 | |
| WVO-SSEM-914-BLK | WEVO 914 Semi-Solid Engine Mount, BLACK PILLOWS, each, 914 all [More Info] | $87.50 | |
