| Porsche 914 Camshafts & Lifters - Page 1 |
Camshaft Bearing Sets |
| Another must for rebuilding an engine. The camshaft bearings work the same way as the crankshaft bearings do. They are used to secure the camshaft in the engine case. |
|
021-198-541-M173 | Camshaft Bearing Set, Standard Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Kolbenschmidt [More Info] |  |
| $14.25 |  |
113-101-157C-OEM | Camshaft Plug, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
Camshafts  |
| Original camshafts can be reground to work in rebuilt motors, however, they will never perform as well as a new one. This is because there is no way to replace the worn material on the cam lobes. While performing a full rebuild, you should replace both the camshaft and the lifters. If you regrind your old camshaft, make sure that you regrind the lifters as well. Original camshafts are sold with different size cam gears. These gears are matched to the characteristics of the engine case. Check the backlash on the crank/cam gear combination, or simply replace the gear with one of the same size of the one that came out of the case. The size of the cam gear is stamped on the gear. If there is no stamp there, the gear is most likely a -0- gear. |
|
| 021-109-027M-OEM | Camshaft, New +3 Gear Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | $405.50 | |
| 021-109-025M-OEM | Camshaft, New +2 Gear Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | $405.50 | |
| 021-109-023M-OEM | Camshaft, New +1 Gear Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
| 021-109-021M-OEM | Camshaft, New, 0 Gear Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
| 021-109-019M-OEM | Camshaft, New, -1 Gear Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | $306.75 | |
| 021-109-017M-OEM | Camshaft, New, -2 Gear Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | $405.00 | |
| 021-109-015M-OEM | Camshaft, New, -3 Gear Size, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Genuine Porsche [More Info] | No Longer Available | |
Lifters (Camshaft Followers) |
| Engine rebuild got you down? Lift your spirits with new lifters! Well, it's worth a try. Always replace the cam lifters when replacing the cam. Never mix and match lifters, or replace the lifters without replacing the cam. This will lead to very premature wear on the cam, and eventual failure of your rebuild. |
|
021-109-309G-M36 | Factory Camshaft Lifter, 8 Per Car, 914 1.7/1.8/2.0 (1970-76), Each
Brand: Febi [More Info] | |
| $15.00 | |
Web-Cam Camshafts |
| Web-Cam Performance Camshafts |
| Web-Cam camshafts and lifters are extremely high quality aftermarket replacements for the original Porsche cam. The Camshafts are race-proven, and provide some extra performance options not originally available on the stock motor. Web-Cam lifters are precision ground and hardened to reduce wear. All Web-Camshafts come without the cam gear, which must either be purchased separately, or can be removed from your old camshaft. |
|
| The stock grind is an excellent alternative to the original Porsche cam and is designed to work with the factory fuel injection. |
|
| WCAM-142 | Web-Cam Stock Camshaft, 914 1.7/1.8/2.0 (1970-76), Each [More Info] | $148.90 | |
| The carbureted street performance cam is a great alternative cam for cars that have been converted to carburetion. These cams will give you better performance over the original stock cam whose lobes are ground with characteristics of the fuel injection system in mind. Lift .423, Duration 270 Degrees. For Use With Carburetors Or Aftermarket Fuel Injection Setups Only. |
|
| WCAM-152 | Web-Cam Carbureted Performance Camshaft, 914 1.7/1.8/2.0 (1970-76), Each [More Info] | $176.25 | |
| This high performance camshaft is tuned for optimal performance at higher RPMs. Get that extra performance where you need it, and achieve ever higher top speeds. Lift .435, Duration 290 Degrees. For Use With Carburetors Or Aftermarket Fuel Injection Setups Only. |
|
| WCAM-232 | Web-Cam Carbureted Racing Camshaft, 914 1.7/1.8/2.0 (1970-76), Each [More Info] | $169.25 | |
| These lifters must be used with the high performance Web-Cams described above. |
|
| WCAM-263 | Web-Cam Performance Lifter Set, 8 Lifters Per Set, 914 1.7/1.8/2.0 (1970-76), Each [More Info] | $152.85 | |
