| Porsche 914 Rear End Seals - Page 2 |
-H- Inner Door Seals |
| This seal helps keep the door tight when closed. Without it, the door can rattle annoyingly. This seal mates to the body, not the door. |
|
| 914-531-821-10-M260 | Inner Door Seal, Left, 914 1.7/1.8/2.0 (1970-76), 914-6 (1970-72), Each Brand: OEM [Photo] |  |
| $65.75 |  |
| 914-531-822-10-M260 | Inner Door Seal, Right, 914 1.7/1.8/2.0 (1970-76), 914-6 (1970-72), Each Brand: OEM [Photo] |  |
| $55.25 |  |
-I- Outer Door Seals |
| The outer door seal helps seal the door against water and wind noise. This is the seal that mates to the door. |
|
 914-531-813-10-M136 | Outer Door Seal, Left, 914 1.7/1.8/2.0 (1970-76), 914-6 (1970-72), Each Brand: OEM [Photo] |  |
| $79.00 |  |
| 914-531-814-10-M136 | Outer Door Seal, Right, 914 1.7/1.8/2.0 (1970-76), 914-6 (1970-72), Each Brand: OEM |  |
| $80.00 |  |
-J- Rear Trunk Seal (front) |
| This seal sits on the front wall of the rear trunk, and seals the trunk with respect to the engine compartment. |
|
 914-512-315-10-M260 | Rear Trunk Seal, Front, 914 1.7/1.8/2.0 (1970-76), 914-6 (1970-72), Each Brand: OEM [Photo] |  |
| $59.00 |  |
Gummi Pflege Rubber and Weatherstripping Treatment |
| Keep your valuable seals and rubber looking factory fresh. Gummi Pflege is specially formulated for protecting rubber from UV damage and keeps rubber from drying out, staying supple and pliable for years to come. |
|
 IZ-914805 | 1Z Gummi Pflege Rubber Protection 100 ml [Photo] | $8.00 |  |
Wurth Glue and Adhesive Products |
Wurth is the recommended glue and adhesive product for your German daily driver to Concour restoration project. Rubber Glue is used as an adhesive for rubber seals and side mouldings on rough, pretreated or painted metal surfaces. Temperature resistant up to approx. +194°F. Will not harm fresh paint. Contents 6.3 fl. oz. Spray Adhesive-This professional heavy duty Spray Adhesive is a fast tack trim cement that gives excellent results on a wide range of materials. Wurth Spray Adhesive is a nonmethylene chloride formulation and is Ozone friendly - C.F.C. free. Dries fast and stronger than some competitive products. Easy to apply a thin, consistent spray without clots. Not For Use In High Heat (max. temp. 100 F). Dry time: 10 min. - 40 p.s.i., 24 hrs. - 87p.s.i. Content: 15 oz.(529 g.) |
|
 WRTH-890100015 | Wurth Rubber Glue, 6.3 o.z. [Photo] | $18.75 |  |
 WRTH-890910055 | Wurth Spray Adhesive, 12 oz. [Photo] | $9.65 |  |
| 3M Weatherstrip Adhesives |
 TOL-3M-8011 | 3M Weatherstrip Adhesive (Black), 5 ounce tube [Photo] | $8.30 |  |
 TOL-3M-8001 | 3M Super Weatherstrip Adhesive (Yellow), 5 ounce tube [Photo] | $6.40 |  |