| Porsche 911 & Carrera Air Conditioning - Page 4 |
Hoses |
| Receiver Dryer To Evaporator Hoses |
911-573-152-02-M207 | Receiver Dryer To Evaporator Hose, 911/911 Turbo/911SC (1974-83), Each
Brand: Griffiths [Photo] |  |
| $94.50 |  |
911-573-152-03-M260 | Receiver Dryer To Evaporator Hose, 911 Carrera/911 Turbo (1984-89), Each
Brand: OEM [Photo] | |
| $42.00 | |
Brackets & Fasteners |
| 911-573-145-00-OEM | A/C Condensor Hose Bracket, 911 (1978-89), Each
Brand: Genuine Porsche | $6.50 | |
O-Rings |
| These O-rings are used to keep refrigerant from escaping the system at points where hoses or components meet. It is highly recommended that you replace old O-rings with new ones whenever you open the system up to the outside air. |
|
999-707-284-40-M325 | A/C O-Ring, 6.6 X 1.5mm, 911 (1974-89), As Needed, Each
Brand: Santech [Photo] | |
| $0.50 | |
999-707-247-40-M325 | A/C O-Ring, 7.5 x 2mm, 911 (1974-89), As Needed, Each
Brand: Santech [Photo] | |
| $0.25 | |
999-707-261-40-M325 | A/C O-Ring, 9 X 1.8mm, 911 (1974-89), As Needed, Each
Brand: Santech [Photo] | |
| $0.25 | |
999-707-434-41-M325 | A/C O-Ring, 10.6 X 2mm, 911 (1974-89), As Needed, Each
Brand: Santech [Photo] | |
| $0.50 | |
999-707-251-40-M325 | A/C O-Ring, 14 x 2mm, 911 (1974-89), As Needed, Each
Brand: Santech [Photo] | |
| $0.75 | |
999-707-534-41-M325 | A/C O-Ring, 17 X 2mm, 911 (1974-89), As Needed, Each
Brand: Santech [Photo] | |
| $0.50 | |
944-126-935-01-M325 | A/C O-Ring, for Compressor Service Fittings (20 x 2.5 mm), 911 (1984-89), (4 per car, sold per each)
Brand: Santech [Photo] | |
| $0.50 | |
| Seal Ring |
| 999-704-134-40-OEM | Seal Ring 4 x 15 x 4.5 (13 per car, sold per each), 911 (1978-89)
Brand: Genuine Porsche | $0.25 | |
| A/C O-Ring Kits |
10-9808-204-M325 | A/C O-Ring Kit, Contains 7 Different Sizes with a Total of 35 O-Rings, 911 (1974-89), As Needed, Each
Brand: Santech [Photo] | |
| $29.50 | |
RennAire A/C Systems  |
| RennAire products are true upgrades that offer better-than-original performance and employ the latest and greatest in air conditioning technology. RennAire products are engineered to fit precisely in place of factory pieces, so no modifications are required to install. Only the highest-quality fittings, hoses, and components are used -- and every part is checked for quality before leaving the facility. All RennAire products carry a one-year warranty. |
|
| RennAire ProCooler Kit |
| Replacing the factory receiver/drier, the ProCooler is a refrigerated receiver/drier that requires no modification to the car. In addition to lowering vent temperatures as much as twenty degrees, the ProCooler substantially lowers operating pressure. Because the ProCooler does not rely on airflow, it improves AC efficiency even in traffic when condensers suffer. |
|
RA-PRO-COOLER | RennAire ProCooler Kit, 911 (1965-89) [Photo] | $299.00 | |
| RennAire Serpentine Evaporator |
| RennAire's high efficiency serpentine evaporator is a drop-in replacement for the stock unit on all 911s through 1989. Installation requires no modification to the evaporator box or to the body. The serpentine design improves cooling performance and increases airflow over the old tube and fin configuration. An Expansion Valve (Parker Hannifin) is included. |
|
RA-SERP-EVAP | RennAire High Efficiency Serpentine Evaporator, 911 (1965-89) includes flare adapters for early cars [Photo] [Photo] | $269.00 | |
