| Porsche 911 & Carrera Clutch & Flywheel - Page 8 |
Clutch Release Parts |
| Clutch Release for G50 Transmission |
901-351-927-10-M33 | Clutch Slave Bleed Nipple Cap, 911 (1987-89), 911 Turbo (1989)
Brand: FTE [More Info] |  |
| $1.25 |  |
928-351-945-03-OEM | Clutch Slave Bleeder Valve, 911 (1987-89), 911 Turbo (1989)
Brand: Genuine Porsche [More Info] | $7.25 | |
| Updated Throw Out Bearing Guide Tube, 911 (1987-89), 911 Turbo (1989) |
| 950-116-813-06-M260 | Updated Throw Out Bearing Guide Tube, 911 (1987-89), 911 Turbo (1989)
Brand: OEM [More Info] | |
| $69.00 | |
950-116-813-06-M157 | Updated Throw Out Bearing Guide Tube, 911 (1987-89), 911 Turbo (1989)
Brand: Rauch & Spiegel [More Info] | |
| $74.50 | |
|
950-116-710-04-M260 | Release Bearing Throw Out Arm, 911 (1987-89), 911 Turbo (1989)
Brand: OEM [More Info] | |
| $53.00 | |
| Needle Bearing, 911 (1987-89), 911 Turbo (1989) |
999-201-365-00-M40 | Needle Bearing, 911 (1987-89), 911 Turbo (1989)
Brand: INA [More Info] | |
| $6.50 | |
999-113-418-40-M100 | Shaft Seal (sold per each, 2 req), 911 (1987-89), 911 Turbo (1989)
Brand: Genuine Porsche [More Info] | |
| $3.00 | |
|
950-116-710-04-M260 | Release Lever Shaft, 911 (1987-89), 911 Turbo (1989)
Brand: OEM [More Info] | |
| $53.00 | |
915-301-129-01-M100 | Bushing for Release Bearing Shaft (2 required, sold individually), 911 (1972-86), 912E, 911 Turbo (1976-77)
Brand: Genuine Porsche [More Info] | |
| $25.50 | |
999-201-339-00-M40 | Needle Bearing, 911 (1987-89), 911 Turbo (1989)
Brand: INA [More Info] | |
| $9.50 | |
950-116-725-00-M100 | Bearing Cover, 911 (1987-89), 911 Turbo (1989)
Brand: Genuine Porsche [More Info] | |
| $2.75 | |
950-116-713-02-M100 | Holder, 911 (1987-89), 911 Turbo (1989)
Brand: Genuine Porsche [More Info] | |
| $2.50 | |
900-075-057-02-OEM | Holder Bolt M6x16, 911 (1987-89)
Brand: Genuine Porsche [More Info] | $1.00 | |
Clutch Pedal Parts |
| If you can't find what you are looking for in the previous sections, then take a close look at the Pedal Clusters Parts & Fasteners section. We've managed to list just about every piece and part that you might need to restore your pedal cluster back to original working condition. |
|
| Clutch Pedal Parts, 911 (1974-86) & 911 Turbo (1976-88) |
901-423-343-00-M105 | Clutch Pedal Arm/Clevis Bushing (Bronze), 911/912E (1974-86), 911 Turbo (1976-88) [More Info] | |
| $1.75 | |
901-423-343-00-M260 | Clutch Pedal Arm/Clevis Bushing (Plastic), 911/912E (1974-86), 911 Turbo (1976-88)
Brand: OEM [More Info] | |
| $6.25 | |
911-423-305-05-M100 | Clutch Pedal Spring, 911 (1974-76)
Brand: Genuine Porsche [More Info] | |
| $25.75 | |
| 911-423-305-06-M100 | Clutch Pedal Spring, 911 Turbo (1977-86)
Brand: Genuine Porsche [More Info] | |
| $31.75 | |
911-423-305-05-M100 | Clutch Pedal Spring, 911 Turbo (1976-77)
Brand: Genuine Porsche [More Info] | |
| $25.75 | |
| 930-423-005-00-OEM | Clutch Pedal Spring, 911 Turbo (1978-88)
Brand: Genuine Porsche [More Info] | No Longer Available | |
914-423-922-02-M136 | Clutch Cable Boot, 911/911 Turbo (1974-77)
Brand: OEM [More Info] | |
| $4.50 | |
311-713-269A-OEM | Clutch Cable Boot, 911 (1978-86), 911 Turbo (1978-88)
Brand: Genuine Porsche [More Info] | $5.75 | |
900-076-010-02-M260 | Clevis Pin Lock Nut, 911 (1974-86), 911 Turbo (1976-88)
Brand: OEM [More Info] | |
| $0.25 | |
999-166-001-02-M260 | Snap Retainer Clip / Pin For Clevis Fork (clutch cable to pedal shaft), 911/912E (1974-86), 911 Turbo (1976-88)
Brand: OEM [More Info] | |
| $3.25 | |
900-166-002-02-M260 | Clutch Clevis Fork (clutch cable to pedal shaft), 911/912E (1974-86), 911 Turbo (1976-88)
Brand: OEM [More Info] | |
| $6.25 | |
911-423-077-05-OEM | Clutch Pedal, 911 (1974-86)
Brand: Genuine Porsche [More Info] | $78.00 | |
