| Porsche 911 & Carrera Clutch & Flywheel - Page 7 |
Clutch Master / Slave Cylinders, Hydraulic Lines & Hardware |
| Is your clutch release not working as well as you'd like it to? Are you a slave to your worn out cylinders? Get control with a replacement master or slave clutch cylinder. Each time you perform a clutch job on your Carrera, make sure that you inspect both your master and slave cylinders. The clutch master cylinder is located near the pedal cluster, and the slave cylinder is mounted on the transmission. If either one is leaking, then they should be replaced immediately. Leaking hydraulic fluid has a tendency to easily corrode anything that it touches. The clutch system on the 1987-89 Carrera is self adjusting - if you are having trouble shifting, and the cause is definitely not your clutch components, then you should probably replace both the master and slave cylinders. |
|
| 911-423-171-03-M33 | Clutch Master Cylinder, 911 (1987-89)
Brand: FTE [More Info] |  |
| $98.75 |  |
| 950-116-237-12-M33 | Clutch Slave Cylinder, 911 (1987-89), 911 Turbo (1989)
Brand: FTE [More Info] | |
| $85.75 | |
911-423-197-00-OEM | Hydraulic Line from Master Cylinder, 911 (1987-89)
Brand: Genuine Porsche [More Info] | $71.75 | |
477-209-161-OEM | Hydraulic Line Connector, 911 (1987-89)
Brand: Genuine Porsche [More Info] | $20.50 | |
911-423-199-02-OEM | Hydraulic Line Down Center Tunnel, 911 (1987-89)
Brand: Genuine Porsche [More Info] | $135.25 | |
| 911-423-177-03-M33 | Flex Line to Slave Cylinder, 911 (1987-89)
Brand: FTE [More Info] | |
| $50.00 | |
930-423-175-00-OEM | Flex Line to Slave Cylinder, 911 Turbo (1989)
Brand: Genuine Porsche [More Info] | $77.25 | |
911-423-923-00-OEM | Hydraulic Supply Connecting Tube, 911 (1987-89)
Brand: Genuine Porsche [More Info] | $8.25 | |
911-423-925-00-OEM | Grommet for Hydraulic Supply Connecting Tube, 911 (1987-89)
Brand: Genuine Porsche [More Info] | $8.00 | |
999-924-001-40-OEM | Clutch Master Cylinder Bushing,911 (1987-89)
Brand: Genuine Porsche [More Info] | $3.00 | |
N900-470-01-OEM | Clutch Master Cylinder Clip, 911 (1987-89)
Brand: Genuine Porsche [More Info] | $7.50 | |
911-423-307-00-OEM | Clutch Master Cylinder Connector Block, 911 (1987-89)
Brand: Genuine Porsche [More Info] | No Longer Available | |
Clutch Release Parts |
| Clutch Release for 915 Transmission |
| When replacing your clutch, you may find out that you need to replace one or more of the small parts that help control the release of the clutch in the bellhousing of the transmission. These parts are exposed to dirt and debris, and are often worn out by the repeated engagement of the clutch during normal everyday driving. |
|
| 915-116-614-02-M260 | Backlash Spring, 911/911 Turbo (1977-86)
Brand: OEM [More Info] | |
| $9.00 | |
| 915-116-087-03-M157 | Throw Out Bearing Guide Tube, 911 (1974-83)
Brand: Rauch & Spiegel [More Info] | |
| $90.50 | |
| 915-116-087-04-M157 | Guide Tube, 911 (1984-86)
Brand: Rauch & Spiegel [More Info] | |
| $83.50 | |
| 950-116-813-06-M157 | Updated Throw Out Bearing Guide Tube, 911 (1987-89), 911 3.3L Turbo (1989)
Brand: Rauch & Spiegel [More Info] | |
| $73.25 | |
| 930-116-813-00-M157 | Guide Tube, 911 Turbo (1976-88)
Brand: Rauch & Spiegel [More Info] | |
| $76.75 | |
| 999-701-359-40-M30 | Guide Tube O-Ring, 911 (1974-86)
Brand: Elring Klinger [More Info] | |
| $1.50 | |
| 915-116-717-00-M100 | Adjustment Lever, 911 (1977-86), 911 Turbo (1977)
Brand: Genuine Porsche [More Info] | |
| $89.75 | |
930-116-717-02-OEM | Adjustment Lever, 911 Turbo (1978-88)
Brand: Genuine Porsche [More Info] | $81.50 | |
915-116-713-01-PH | Throw-Out Lever, 911 (1972-74) [More Info] | $134.95 | |
915-116-713-04-OEM | Throw-Out Lever, 911 (1975)
Brand: Genuine Porsche [More Info] | No Longer Available | |
915-116-713-05-OEM | Throw-Out Lever, 911 (1976)
Brand: Genuine Porsche [More Info] | No Longer Available | |
930-116-713-00-OEM | Throw-Out Lever, 911 Turbo (1976)
Brand: Genuine Porsche [More Info] | No Longer Available | |
915-116-713-08-OEM | Throw-Out Lever, 911 (1977-86), 911 Turbo (1977)
Brand: Genuine Porsche [More Info] | $157.25 | |
930-116-713-06-OEM | Throw-Out Lever, 911 Turbo (1978-88)
Brand: Genuine Porsche [More Info] | $180.00 | |
915-116-133-03-OEM | Throw-Out Lever Shaft, 911 (1974-77)
Brand: Genuine Porsche [More Info] | No Longer Available | |
915-116-133-05-OEM | Throw-Out Lever Shaft, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $96.00 | |
N-012-418-1-OEM | Throw-Out Lever Shaft Lower Circlip, 911 (1974-86), 911 Turbo (1976-88)
Brand: Genuine Porsche [More Info] | $1.00 | |
| 915-301-139-00-M30 | Throw-Out Lever Seal (sold per each), 911 (1974-77, 1 req.), 911 (1978-86, 3 req.), 911 Turbo (1976-77, 2 req.)
Brand: Elring Klinger [More Info] | |
| $2.50 | |
930-301-140-00-OEM | Throw-Out Lever Seal (2 per car, sold individually), 911 Turbo (1978-88)
Brand: Genuine Porsche [More Info] | $5.75 | |
N011-118-11-OEM | Throw-Out Lever Adjustment Retaining Nut, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $4.25 | |
N-010-247-7-OEM | Throw-Out Lever Adjustment Bolt, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $2.00 | |
| 999-152-073-01-OEM | Throw-Out Bearing Circlip, 911 (1974-86)
Brand: Genuine Porsche [More Info] | No Longer Available | |
| :915-116-712-01-M136 | Throw-Out Bearing, Clutch Release Fork, 911 (1974-86)
Brand: OEM [More Info] | | |
930-116-712-02-OEM | Throw-Out Bearing, Clutch Release Fork, 911 Turbo (1976-88)
Brand: Genuine Porsche [More Info] | $198.50 | |
| 997-116-086-90-M100 | Clutch Release Fork (NOTE: Should be updated with kit 10-1518-086-M260), 911 (1987-89), 911 Turbo (1989)
Brand: Genuine Porsche [More Info] | |
| $243.00 | |
| 10-1518-086-M260 | Kit for Release Bearing Fork Shaft (contains: cross shaft, bearings, seals) [More Info] | |
| $87.00 | |
900-095-050-00-OEM | Throw-Out Bearing Release Fork Roll Pin, 911/911 Turbo (1974-88)
Brand: Genuine Porsche [More Info] | $1.50 | |
| 930-116-064-06-M260 | Clutch Arm Helper Spring, 911/911 Turbo (1976-77)
Brand: OEM [More Info] | |
| $93.25 | |
| 915-116-064-01-M260 | Clutch Arm Helper Spring, 911 (1978-86)
Brand: OEM [More Info] | |
| $79.50 | |
930-116-064-11-OEM | Clutch Arm Helper Spring, 911 Turbo (1978-88)
Brand: Genuine Porsche [More Info] | $151.25 | |
930-116-617-00-OEM | Helper Spring Spacers, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $3.25 | |
N012-408-2-OEM | Helper Spring Upper Circlip, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $1.00 | |
999-701-209-40-OEM | Helper Spring Upper O-Ring, 7.3x2.4mm, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $2.25 | |
900-234-502-01-OEM | Helper Spring Washer, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $2.00 | |
N012-408-2-OEM | Helper Spring Lower Circlip, 8x.8mm, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $1.00 | |
900-036-016-02-OEM | Assembly Lower Cover, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $4.00 | |
999-201-212-00-OEM | Helper Spring Bearing, 2 req, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $8.25 | |
915-116-624-00-OEM | Helper Spring Pivot Pin, 911 (1978-86)
Brand: Genuine Porsche [More Info] | $17.50 | |
