| Porsche 911 & Carrera Steering System - Page 4 |
Steering Wheels |
| Steering Eccentric Adapter |
The JWest Engineering Steering Eccentric Adapter offsets the steering wheel 12mm upward and 16mm rearward for a better view of the gauges. It is designed for use with a MOMO steering wheel and hub. Choose from Black textured finish or plain aluminum. Mounting screws included.
NOTE: Requires sheet metal horn button retainer (included with most Momo late-model hub adapters). |
|
JWST-ECC-AL | JWest Engineering Steering Eccentric Adapter, Aluminum, for use with MOMO steering wheel hub, Requires sheet metal horn button retainer (not included), each [Photo] | $48.00 |  |
| Steering Wheel Recovering Kits |
| Is your steering wheel looking like it yearns for the years when it was new? Old threads combined with worn out leather, can give your interior a weathered look that is not too pretty on the eyes. The kits come complete with thread and needle. Available for both the four and three spoke steering wheels used from 1974-89. Available in black only. Please note that this is a do-it-yourselfer project, but the recovering process does take a lot of patience and some skill, as the leather must be tightly stretched around the wheel as you stitch it. |
|
PEL-PP-9102-3BLK | Steering Wheel Recovering Kit, Black, three spoke wheel, 911 (1974-84) | $49.95 | |
PEL-PP-9102-4BLK | Steering Wheel Recovering Kit, Black, four spoke wheel, 911 (1985-89) | $49.95 | |
| Factory Steering Wheels, Horn Pads and Parts |
| This is what you stare at when you're sitting in your car at night in your PJs, wishing you had the engine back in and were driving it (or am I the only one who's crazy?). Horn pads do so much to improving the looks of your interior. How about adding a Porsche crest to the center? The 356 hood crests are almost the exact proper size for attachment to the center of your horn pad. Improve the appearance significantly! Or, you can update your 1974-79 911 with a later-style steering wheel, either the 911SC style or the 911 Carrera Style. All three are interchangeable, and can tailor the look of your car to your particular tastes. |
|
| 911-347-083-00-OEM | Factory Original Steering Wheel, black, 911 (1974-79)
Brand: Genuine Porsche | No Longer Available | |
| 911-347-097-00-70B-OEM | Horn Pad, black, 911 (1974-79)
Brand: Genuine Porsche | No Longer Available | |
911-347-084-02-1AJ-OEM | Factory Original Steering Wheel, black, 911 (1980-84)
Brand: Genuine Porsche [Photo] | No Longer Available | |
944-347-859-04-1DB-OEM | Horn Pad, black, 911 (1980-84)
Brand: Genuine Porsche [Photo] | $109.75 | |
| 321-419-779-OEM | Horn Pad Insulating Bushing for 3-Spoke Steering Wheels, 3 req, each, Porsche 911 (1980-84) | $3.75 | |
911-347-084-08-1AJ-OEM | Factory Original Steering Wheel, black, 911 (1986-89)
Brand: Genuine Porsche [Photo] | $1185.25 | |
911-347-859-07-7YA-OEM | Horn Pad, black, 911 (1986-89)
Brand: Genuine Porsche [Photo] | $394.25 | |
| 911-347-099-05-OEM | Slip Ring for Horn Contact, (1974-77)
Brand: Genuine Porsche | $16.00 | |
| 911-347-099-05-OEM | Slip Ring for Horn Contact, (1978-89)
Brand: Genuine Porsche | $16.00 | |
900-078-007-02-OEM | Steering Wheel Nut, 911 (1974-89)
Brand: Genuine Porsche | $2.50 | |
| N012-239-1-OEM | Washer for Steering Wheel Nut, 911 (1974-89)
Brand: Genuine Porsche | $0.75 | |
Steering Column |
| Here is where we've listed the interior parts that are associated with the steering column. Removal of the steering wheel for replacement with an aftermarket wheel is a pretty easy job, and can be performed in about an hour with the right tools and a little bit of knowledge. For more information, please see our Pelican Technical Article, Steering Wheel Removal and Installation. |
|
| Steering Wheel Bearing Qwik-Fix Sleeve |
Is your steering shaft loose, or does it vibrate and rattle while you are driving? It could be that your steering wheel bearing is worn out. Replacing this bearing (sold above) is a lengthy and difficult process, however, there is a Pelican Parts qwik-fix bushing that can be installed in about a half hour. The part that actually fails is a plastic bushing located inside the bearing. This qwik-fix part replaces that bushing and restores the steering wheel bearing close to its original specifications. For complete installation procedures, check out our Pelican Technical Article on Steering Wheel Shaft Bearing Sleeve Qwik-Fix Installation.
Manufacturer: Porsche OEM |
|
928-347-739-02-M100 | Steering Wheel Bearing Qwik-Fix Sleeve, 911/912E/930 (1974-89)
Brand: Genuine Porsche [Photo] [Photo] |  |
| $12.75 | |
911-347-771-02-M100 | Steering Shaft Bearing, 911/912E/911 Turbo (1974-89)
Brand: Genuine Porsche [Photo] | |
| $23.75 | |
