| Porsche 911 & Carrera Steering System - Page 3 |
Bump Steer Correction |
| Bump Steer Tie Rod Kit |
Because the steering rack can be moved only a limited amount, the steering geometry cannot be fully corrected with rack spacers. Now we have the solution. Tie rod angularity is corrected with this kit. Using precision quality spherical rod ends, steering wheel kick back is eliminated, and accurate road/track feedback is restored. The kit effectively lowers the mounting point for the tie rods so that the tie rods maintain their alignment parallel to the ground. Bolt-on kit needs no machining.
The Basic kit is designed for use with 911 Turbo tie rods. If you have already converted your 911 or 914 to Turbo tie rods, then select the Basic Bump Steer kit. If you do not have Turbo tie rods, then select the Deluxe Bump Steer kit that includes the Basic Bump Steer kit, Turbo tie rods, protective boots, and hardware.
Manufacturer: Weltmeister |
|
PEL-BSK2 | Deluxe Bump Steer Tie Rod Kit, 911 (1974-89)
(For cars without Turbo Tie Rods) [Photo] | $528.45 |  |
PEL-BSK2A | Basic Bump Steer Tie Rod Kit, 911 (1974-89)
(For cars WITH Turbo Tie Rods) [Photo] | $339.95 | |
Tire Rub Prevention Kit |
Rubbing happens on some cars even with stock tires and the problem is especially common with oversize tires/wheels. Tire rubbing is an unsafe condition that will fail a tech inspection with many track clubs.
This kit works by adjusting the full-lock position of the steering wheel, allowing you to prevent tires from rubbing. The kit is installed between the steering rack and the tie rods, both sides. Can be used on turbo and regular tie rods. |
|
ERMP-2121000 | Elephant Racing Tire Rub Prevention Kit, 911/930 (1965-89) [Photo] [Photo] | $74.95 | |
Steering Wheels |
| 930S Steering Wheel |
| One of the coolest upgrades that you can perform on your car is to install the Porsche 930S style steering wheel. The wheel updates the look of your car to the late style 930. This wheel features hand stitching, genuine black leather, and 14-inch diameter. Hub adapter, for all non-air bag Porsche years and models, must be purchased separately. The hub and Cloisonne' crest on horn pad must be purchased and installed separately. Also check out our Pelican Technical Article on Interior Restoration and Carpet Installation. Check out this detailed, step-by-step technical article on performing this upgrade. This wheel is the real thing from the OEM manufacturer - not a replica. |
|
100-498-F60-1 | 930S Style Steering Wheel (hub and crest sold separately, see below), "Formel" Black 360 mm [Photo] | $384.00 | |
100-498-161-9X1 | Hub Kit, for 930S Style Formel Steering Wheel, 911 (1974-89) [Photo] | $145.00 | |
644-559-210-00-M260 | Porsche Crest with Gold Finish for 930S Style Steering Wheel
Brand: OEM [Photo] |  |
| $32.50 | |
PEL-SPEC-SPR | 930S Style Steering Wheel Spacer [Photo] | $58.00 | |
| Momo Prototipo Steering Wheel |
The Momo Prototipo steering wheel is a popular period wheel the factory used on many of the 70's race cars. It measures 13.75" in diameter (350mm) and is wrapped in Black leather.
For quite some time now, these wheels have only been available anodized in black. Now, and for a limited time only, Pelican Parts has exclusively obtained a limited supply of Prototipo wheels in SILVER - a perfect match for your 911R, RS, or any timeless classic! Get one today while supplies last! |
|
MO-PROTOTIPO-S | Momo Prototipo Steering Wheel - Silver [Photo] [Photo] | $209.75 | |
MO-PROTOTIPO | Momo Prototipo Steering Wheel - Black [Photo] | $209.75 | |
MO-0230 | Porsche Hub Adapter, 911 (Up to 7/73) | $68.85 | |
MO-L231 | Porsche Hub Adapter, 911, 911 Carrera, 911 Turbo (8/73-89) | $72.00 | |
| Quick Release Steering Hub And Adapter Kit |
| For the Racer in you, this Quick Release Steering Hub And Adapter is designed specifically for the Momo, Sparco and OMP Steering wheels. With this adapter installed, it allows easy entry and exit from the driver's seat, especially when using racing seats. Meets all safety requirements for Racing, also a great security device once the wheel is removed! Simple bolt-on application with no modification to your car. WARNING! This product is designed for Racing use ONLY! It is not approved for highway use and has no provision for a horn. |
|
PEL-QRS-1003 | Quick Release Steering Wheel Hub Adapter, 911 (thru-7/74) [Photo] [Photo] | No Longer Available | |
PEL-QRS-1001 | Quick Release Steering Wheel Hub Adapter, 911/911 Turbo (8/74-89) [Photo] [Photo] | $247.98 | |
PEL-MOMO-SPACER | Momo Additional 1/2" Hub/Wheel Spacer [Photo] | $16.20 | |
