|  | | | Porsche 911 & Carrera Suspension - Page 5 | Torsion Bars | | QuickChange Hollow Torsion Bars | QuickChange Torsion Bars include a female threaded end that you can engage with a bolt (not included) to use as a handle for easier extraction and insertion. This makes it easy to dislodge a stuck bar without damaging the splined ends or bar surfaces. They are also completely Plated and Plugged. The ends are plugged to prevent moisture entry that rots ordinary hollow bars from the inside out. The entire bar is zinc plated for superior protection. Last but not least, when using the rear QuickChange bars in conjunction with Elephant Racing's QuickChange Spring Plate kits, swapping and re-indexing bars can take as little as 5 minutes per side!
NOTE: The size given is a solid-bar-equivalent. Actual hollow bar measures about .5mm larger.
Recommended bolt sizes: Front - 1/4" x 20", Rear - 3/8" x 16" |
| 
ERMP-20920-20 | 20mm Front, QuickChange Hollow Torsion Bars, 911/912 (1965-89), 911 Turbo (1976-89), pair [Photo] | $340.00 |  |
ERMP-20920-21 | 21mm Front, QuickChange Hollow Torsion Bars, 911/912 (1965-89), 911 Turbo (1976-89), pair [Photo] | $340.00 | |
ERMP-20920-22 | 22mm Front, QuickChange Hollow Torsion Bars, 911/912 (1965-89), 911 Turbo (1976-89), pair [Photo] | $340.00 | |
ERMP-20920-23 | 23mm Front, QuickChange Hollow Torsion Bars, 911/912 (1965-89), 911 Turbo (1976-89), pair [Photo] | $340.00 | |
ERMP-20920-24 | 24mm Front, QuickChange Hollow Torsion Bars, 911/912 (1965-89), 911 Turbo (1976-89), pair [Photo] | $340.00 | | 
ERMP-21020-27 | 27mm Rear, QuickChange Hollow Torsion Bars, 911/912 (1965-86), 911 Turbo (1976-88), pair [Photo] | $390.00 | |
ERMP-21020-28 | 28mm Rear, QuickChange Hollow Torsion Bars, 911/912 (1965-86), 911 Turbo (1976-88), pair [Photo] | $390.00 | |
ERMP-21020-29 | 29mm Rear, QuickChange Hollow Torsion Bars, 911/912 (1965-86), 911 Turbo (1976-88), pair [Photo] | $390.00 | |
ERMP-21020-30 | 30mm Rear, QuickChange Hollow Torsion Bars, 911/912 (1965-86), 911 Turbo (1976-88), pair [Photo] | $390.00 | |
ERMP-21020-31 | 31mm Rear, QuickChange Hollow Torsion Bars, 911/912 (1965-86), 911 Turbo (1976-88), pair [Photo] | $390.00 | |
ERMP-21020-32 | 32mm Rear, QuickChange Hollow Torsion Bars, 911/912 (1965-86), 911 Turbo (1976-88), pair [Photo] | $390.00 | |
ERMP-21020-33 | 33mm Rear, QuickChange Hollow Torsion Bars, 911/912 (1965-86), 911 Turbo (1976-88), pair [Photo] | $390.00 | |
ERMP-21021-27 | 27mm Rear, QuickChange Hollow Torsion Bars, 911 (1987-89), 911 Turbo (1989), pair [Photo] | $410.00 | |
ERMP-21021-28 | 28mm Rear, QuickChange Hollow Torsion Bars, 911 (1987-89), 911 Turbo (1989), pair [Photo] | $410.00 | |
ERMP-21021-29 | 29mm Rear, QuickChange Hollow Torsion Bars, 911 (1987-89), 911 Turbo (1989), pair [Photo] | $410.00 | |
ERMP-21021-30 | 30mm Rear, QuickChange Hollow Torsion Bars, 911 (1987-89), 911 Turbo (1989), pair [Photo] | $410.00 | |
ERMP-21021-31 | 31mm Rear, QuickChange Hollow Torsion Bars, 911 (1987-89), 911 Turbo (1989), pair [Photo] | $410.00 | |
ERMP-21021-32 | 32mm Rear, QuickChange Hollow Torsion Bars, 911 (1987-89), 911 Turbo (1989), pair [Photo] | $410.00 | |
ERMP-21021-33 | 33mm Rear, QuickChange Hollow Torsion Bars, 911 (1987-89), 911 Turbo (1989), pair [Photo] | $410.00 | | | Torsion Bar Seal | 
901-341-475-00-OEM | Foam Seal for Torsion Bar, 911 (1974-89), each
Brand: Genuine Porsche [Photo] | $4.25 | | Spoiler Protection Skid Plates | | These Spoiler Protection Skid Plates bolt to the front tow hook brackets, providing added protection and prevents your costly spoiler from scraping on steep driveways and other roadway hazards. A serious consideration for any lowered car with a front spoiler. Easy installation - No drilling required. |
| 
PEL-SP7002 | Spoiler Protection Skid Plates, 912/911/930 (1974-89) [Photo] | $49.85 | |
| |
|
|
|
