Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

Home > 911 Catalog > 911 (1974-89) > Suspension >  Porsche 911 & Carrera Suspension Upgrades & Performance

Bilstein Sports $156.00
Bilstein struts are the recommended choice by Pelican Parts, and are what Tom and Wayne use personally in their Porsches. The Bilsteins are a great performance shock absorber, and will... more...  

Koni Sports
Koni shock absorbers are also an excellent replacement for your shock absorbers. The Konis are a bit more expensive than the Bilsteins, but offer the ability to adjust the level of stiffness... more...  

Poly-Graphite Bushings $89.00
As a front suspension flex point, the rubber mount is a critical component in Porsche 911, 912, 914 and 930 suspensions. Original rubber mounts sag over time, so this easy-to-install mount... more...  

Torsion Bars $335.00
These torsion bars are hollow inside! They're 25-30% lighter in the front, 35-40% lighter in the rear. That pays off in reduced mass and weight in the suspension and better ride and handling... more...  

Skid Plates $49.85
These Spoiler Protection Skid Plates bolt to the front tow hook brackets, providing added protection and prevents your costly spoiler from scraping on steep driveways and other roadway hazards... more...  

Tow Hook and Tie Down Set $89.95
Rennline's new heavy/duty front tow hooks attach to the strongest, forward most point of the 911's front suspension - the front of the a-arm. The tow hooks are bolted down by the same three... more...  

Weltmeister Sway Bars $354.95
Nothing plays a more important role in improving Porsche handling than effective sway bars. Properly balanced and tuned sway bars improve driver control, safety, and driving enjoyment while... more...  

Tarett Sway Bars $475.00
Fine tune your suspension with these Fully Adjustable Hollow Sway Bars! Tarett Engineering designs and manufactures all their components to the highest quality standards, resulting in the... more...  

Adjustable Drop Links $139.90
Upgrade your stock swaybars with this simple bolt in replacement for the factory drop links. Left & right hand threaded rodends allow for simple length adjustment to eliminate swaybar preload... more...  

Cambermeister $209.98
The 911 is one of the most enduring designs in automotive history. Yet one design weakness has been discovered as tires have improved: the front suspension can lose its proper camber under... more...  

Weltmeister Camber Plates $399.90
Get a dramatic increase in steering and suspension feedback, quicker turn in and precise cornering. Weltmeister's CamberPlates replace soft top strut rubber bushings with precision spherical... more...  

QuickChange Camber Plates $600.00
These bolt-in QuickChange Camber Plates allow easy camber adjustment, independent of caster. Loosening the large center nut allows camber to be changed quickly. Built-in indices allow... more...  

JM Strut Tower Brace $115.00
This Strut Tower Brace looks as good as it works. Made from aircraft grade polished aluminum. The airfoil shape is stiffer than other aluminum bars and its easy to install and light weight... more...  

Rennline Strut Brace $180.00
One of the easiest and most cost-effective ways to improve your car’s handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually... more...  

Integrated Monoball 2 Point Strut Braces $199.00
Also designed to work in conjunction with Rennline front monoballs, the 2-point strut brace is an excellent cost-saving alternative for owners who wish to maximize front trunk space. The... more...  

Integrated Monoball 3 Point Strut Braces $249.00
Rennline has designed a 3-point strut brace specifically to work with the Rennline front monoballs and create an integrated front suspension system unavailable anywhere else on the market... more...  

Rennline Sealed Monoballs $225.00
The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the 40+ years the 911 has been on the road. For one, the rubber suspension... more...  

Rennline Truss Mount Strut Braces $225.00
Introducing the first "Strut Brace System" on the market. This system mounts like no other brace in its class. The billet aluminum mounting brackets have been formed to perfectly fit the... more...  

Elephant Racing Strut Brace $160.00
Elephant Racing's 911/930 triangulated aluminum strut brace weighs a scant 3.3 lbs! Triangulation provides rigidity to hold camber settings under heavy corner loads. Compare to other manufacturer... more...  

935 Style Chassis Brace $450.00
Inspired by the chassis braces used on 935 race cars, this brace triangulates and stiffens the entire front chassis and strut towers. Completely bolt on, it attaches to the camber plates... more...  

Brey-Krause Strut Braces $260.70
Brey-Krause strut tower braces incorporate high strength precision rod ends for adjustability and perfect fit. Their design uses factory mounting points and transfers the load to the strut... more...  

Elephant Racing Front/Rear Monoball Cartridges $249.95
These little gems will hold your camber settings lap after lap. If you want to be fast, your suspension pickup points must be rigid to hold suspension geometry in check even under the heaviest... more...  

PolyBronze Suspension Bushing Sets $260.00
Unlike the polyurethane bushings that may require custom lathe fitting to install properly, these Elephant Racing PolyBronze Suspension Bearings require no custom fitment and never exhibit... more...  

Low-Friction Control Arm Mounts $200.00
911 factory control arm mounts have slotted holes that allow for self-alignment in the horizontal plane only. Any misalignment in the vertical plane results in pinching and binding at the... more...  

Tarett Engineering 935 Rear Spring Plate Set $795.00
Tarett Engineering 935 Rear Spring Plate Set replaces the factory spring plates and rubber bushings when converting to a coil over rear suspension system. The precision rod end allows for... more...  

Rebel Racing 935 Rear Spring Plate Set $819.00
Rebel Racing Products' 935 Rear Spring Plate Set fits 911 (1966-89), 912, and 930s with rear coil over suspension. This design concept was incorporated by Porsche for the dominant 935 race... more...  

Targa Body Brace $174.60
Tighten up your 911 Targa with these diagonally mounted strut style braces. The polished Aluminum bars mount using the seat belt bolts in the lower side sills and the B-pillar. By tying... more...  

Turbo Tie Rod Kit $188.50
The original factory tie rods use rubber dampers which can make steering feel spongy, especially with age. Upgrading to this 911 Turbo tie rod kit will give your car firmer and more responsive... more...  

Bump Steer Steering Rack Spacers $13.95
Is your car suffering from steering 'kick-back' that results from lowering your front suspension? The problem arises when the steering rack is lowered, changing the overall geometry of... more...  

Adjustable Bump Steer Kit $335.00
Elephant Racing's proprietary-design Adjustable Bump Steer kit delivers true adjustability in a super strong package. Bump steer is a change in toe setting resulting from vertical wheel... more...  

Rebel Racing Adjustable Bump Steer Kit $289.00
Rebel Racing Products' (RSR) adjustable bump steer kit utilizes one of Germany's highest metric quality rod ends (the Hirschmann series, as seen on the Carrera GT) and is capable of 30 degrees... more...  

Bump Steer Tie Rod Kit $528.45
Because the steering rack can be moved only a limited amount, the steering geometry cannot be fully corrected with rack spacers. Now we have the solution. Tie rod angularity is corrected... more...  

Steering Wheel Bearing Qwik-Fix Sleeve $12.75
Is your steering shaft loose, or does it vibrate and rattle while you are driving? It could be that your steering wheel bearing is worn out. Replacing this bearing (sold above) is a lengthy... more...  

De-Cambered Ball Joints $350.00
Need more camber? Elephant Racing's proprietary-design De-Cambered Ball Joints provide up to 3/4 degree additional negative camber per side. Track is widened up to 1/2 inch. The ball... more...  

Adjustable Spring Plates $379.98
These adjustable spring plates by Sway-A-Way are exactly what you need if you are looking to often adjust the rear height of your 911 suspension. Designed with a built-in adjustment screw... more...  

ASP Spring Plates $1200.00
The ASP Adjustable Spring Plate kit corrects the rear suspension camber curve to maintain an optimal tire contact patch. What this yields is superior grip in turns, superior grip in straight... more...  

QuickChange Spring Plate Kit $425.00
QuickChange spring plates make fast work of torsion bar re-indexing and replacement. A screw-type adjuster makes corner balancing and ride height adjustment a breeze. These plates pair... more...  

Rear CamberMax $120.00
The Rear CamberMax kit simplifies 911 rear camber adjustment, making it easy to achieve aggressive negative camber settings of 3+ degrees. Instead of using the troublesome factory eccentric... more...  

Wheel Spacers/Adapters $23.10
Wheel Spacers/Adapters will widen your track, improve your handling and fill out your fender wells. Staggered stud design allows easy bolt on installation. These wheel spacers/adapters are... more...  

Tire Rub Prevention Kit $74.95
Rubbing happens on some cars even with stock tires and the problem is especially common with oversize tires/wheels. Tire rubbing is an unsafe condition that will fail a tech inspection with... more...  

        

 
  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2009, Pelican Parts Inc.