| Porsche 911 & Carrera Axles & Bearings - Page 6 |
Suspension Tools |
| Ride Height Wrench |
| Don't be without this Ride Height Combination Wrench went setting up your suspension! Fits the spring plate eccentric 24mm and 36mm bolts. Powder coated for a long lasting finish. |
|
PWE-2436RHW | Ride Height Combination Wrench, 911 1977-89 [More Info] | $30.70 |  |
| Trailing Arm Height Adjuster |
| This special service tool was developed in order to aid the technician with SAFE and easy ride height adjustment of rear torsion arms and/or general adjusting of Aftermarket Adjustable Spring Plates. The inherent design of this tool acts as an extension of the trailing arm by latching onto it at two hook points. The end of the protruding tool is supported by a roll-around floor jack. You simply pre-load the suspension and are able to maintain the travel in any desired position w/o having to use chains, which may slip and is very dangerous. |
|
TOL-P244 | Trailing Arm Height Adjuster, Porsche 911/911 Turbo (1965-89) [More Info] | $91.00 | |
Suspension Books |
| No matter what job you are performing, you can never have enough knowledge. We've compiled a list of great suspension and handling books for you to read up on while you're trying to figure out exactly how to configure your 911's suspension. Some books may be special order. |
|
| 101 Projects for Your Porsche 911 |
Hot off the presses, author Wayne R. Dempsey gives us yet another reason to own a Porsche 911. '101 Projects' features weekend projects that you can easily perform on your 911 in your own garage. Ranging from difficult (overview of 911 Engine Rebuilding) to the very simple (washing your car), this book appeals to both the new and experienced 911 owner alike. The book covers the 1965-89 911 and 911 Turbo, the 912, and is also useful for 964 (1990-94) owners as well.
Each project is detailed with an easy-to-read chart showing you exactly how long it should take, what tools you need, applicable years, and the amount of 'wrenching talent' required. The book contains several chapters of project overviews, but mostly all of the projects are shown with step-by-step instructions.
The book is 240 pages long, and contains more than 350 Full-Color pictures and diagrams. Here is a sample page from the shock replacement project. Here is another page on upgrading to the 911 Turbo Look. For those with carburetors, there's an entire project on the rebuild process. Showing the range and breadth of projects, there is also a project on the dash pad installation. For those with older 901 transmissions, there is a project on rebuilding first gear on your transmission. And finally, for the really adventurous, you can try your hand at timing your cams!
All copies that are purchased through Pelican Parts will be autographed by the author. |
|
BK-131569AP | 101 Projects for Your Porsche 911 by Wayne R. Dempsey [More Info] | $22.95 | |
| Carroll Smith's Engineer In Your Pocket |
| "A Practical Guide to Tuning the Race Car Chassis and Suspension" Store all the answers in your hip pocket! This handy pocket guide written by racing professional Carroll Smith suggests realistic solutions to common race car handling problems. Formatted listings of causes and possible effects, and problems and possible causes. 32 pages, spiral-bound. |
|
BK-129569 | Carroll Smiths Engineer In Your Pocket [More Info] | $14.50 | |
| Suspension, Steering & Driveline Manual |
| Haynes Publications. Written for the do-it-yourselfer, but good enough for the pro! Covers troubleshooting, maintenance and repair procedures for most foreign and domestic suspension, FWD and RWD vehicles, steering and driveline systems. Includes rear differential overhaul procedures and modifications for improving your vehicle's handling. 352 pages, 844 illustrations. |
|
BK-127603 | Suspension, Steering and Driveline Manual [More Info] | $22.55 | |
