| Porsche 911 & Carrera Axles & Bearings - Page 3 |
Wheel Bearings & Hub Parts |
| Rear Axle |
 999-053-020-01-M34 | Rear Wheel Bearing, 911 (1974-89) Brand: FAG [Photo] |  |
| $36.75 |  |
 999-059-047-00-M92 | Rear Wheel Bearing, inner, 911 Turbo (1976-89) Brand: SKF [Photo] |  |
| $16.75 |  |
 999-059-056-00-M92 | Rear Wheel Bearing, outer, 911 Turbo (1976-89) Brand: SKF [Photo] |  |
| $22.75 |  |
 999-113-218-40-M42 | Rear Wheel Bearing Inner Seal, 911 Turbo (1976-89) Brand: Goetze [Photo] |  |
| $18.50 |  |
 930-331-609-00-M260 | Rear Wheel Bearing Spacer, 911 Turbo (1976-89) Brand: OEM [Photo] |  |
| $90.25 |  |
 999-113-235-40-M42 | Rear Wheel Bearing Outer Seal, 911 Turbo (1976-89) Brand: Goetze [Photo] |  |
| $17.25 |  |
 911-331-561-30-OEM | Rear Wheel Bearing Cover, 911 (1974-89) Brand: Genuine Porsche [Photo] | $13.00 |  |
 901-332-806-00-OEM | Rear Wheel Hub Castellated Nut, 911 (1974-83, 87-89), 911 Turbo (1976-89) Brand: Genuine Porsche [Photo] | $18.75 |  |
 900-910-093-02-M100 | Rear Wheel Hub Lock Nut, 911 (1984-89) Brand: Genuine Porsche [Photo] [Photo] |  |
| $7.75 |  |
 999-025-046-01-OEM | Rear Wheel Hub Washer, 911 (1974-83), 911 Turbo or Turbo-Look (1976-89) Brand: Genuine Porsche [Photo] | $8.25 |  |
 928-331-591-02-OEM | Rear Wheel Hub Washer, 911 (1984-89) Brand: Genuine Porsche [Photo] | $18.00 |  |
 N-012-538-1-OEM | Rear Wheel Hub Cotter Pin, 911 (1974-84) Brand: Genuine Porsche [Photo] | $0.75 |  |
| Rear Wheel Bearing Extractor and Installer Porsche Kit |
| If you want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one Porsche kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The kit comes with a set of adapters specific to the 911 series, but can also be used on all front and rear wheel drive vehicles with independent suspension. The tool eliminates the need for such drastic measures such as a slide hammer or flame torch to remove the rear wheel bearing. The tool facilitates the installation and removal of the rear bearings, and makes the whole job 1000% easier. |
|
| PEL-TOL-SIRB90-P2 | Rear Hub/Bearing Extractor and Installer Porsche Kit, 911 (1974-89) | $166.00 |  |
Wheel Spacers/Adapters  |
| Wheel Spacers/Adapters will widen your track, improve your handling and fill out your fender wells. Staggered stud design allows easy bolt on installation. These wheel spacers/adapters are hub-centric with ball seating and come with studs. |
|
 PEL-WS-4MM | 4 mm Wheel Spacer (can be used with stock length studs), each [Photo] | $23.10 |  |
 PEL-WS-5MM | 5 mm Wheel Spacer (can be used with stock length studs), each [Photo] | $23.10 |  |
 PEL-WS-014 | 1/4 inch (6.5mm) Wheel Spacer (can be used with stock length studs), each | $23.10 |  |
 PEL-WS-10MM | 10 mm Wheel Spacer, each [Photo] | $48.00 |  |
 PEL-WS-810 | 0.8 inch (21 mm) Wheel Spacer/Adapter, each [Photo] | $119.25 |  |
 PEL-WS-001 | 1 inch Wheel Spacer/Adapter, each | Temporarily unavailable | |
 PEL-WS-015 | 1.5 inch Wheel Spacer/Adapter, each | $120.00 |  |
 PEL-WS-002 | 2 inch Wheel Spacer/Adapter, each | $138.30 |  |
 PEL-WS-003 | 3 inch Wheel Spacer/Adapter, each [Photo] | $181.90 |  |