| Porsche 911 & Carrera Miscellaneous - Page 22 |
Fire Extinguisher Mount |
| Fire Extinguisher Quick Release |
| This Quick-Release allows you to access your fire extinguisher quickly with just one hand! Holds a 2.5 pound H3R model HG250 extinguisher or an AMEREX model 417 extinguisher. Mounts with 4 bolts to existing brackets or any surface. |
|
BK-R-9520 | Brey-Krause Quick Release Fire Extinguisher Mount [More Info] | $239.95 |  |
| Fire Extinguisher Roll-Bar Mounts |
| These brackets allow you to mount a fire extinguisher directly to your roll bar or roll cage. They can be used with either a standard 2.5 lb fire extinguisher mount or the R-9520 quick release mount. All aluminum construction makes for a safe mount that doesnt add a lot of weight to your car. Dont let a poorly secured fire extinguisher ruin your next trip to the track. Safety inspectors arent letting them pass and neither should you. |
|
BK-R-9521 | Brey-Krause roll bar Fire Extinguisher Mount, 1.5 in. and 40 mm [More Info] | $81.00 | |
BK-R-9522 | Brey-Krause roll bar Fire Extinguisher Mount, 1.75 in. [More Info] | $89.00 | |
| Buckley Racing Fire Extinguisher Mount |
| This affordable fire extinguisher mount allows you to place your Halon filled fire extinguisher in a very accessible location between the seats of your 911 based track car. The mount uses existing bolt locations to place it in position on the tunnel and directly above the parking brake pivot point. The parking brake and heater control levers remain accessible and operable. You will need enough space between the seats for the nozzle and handles. The extinguisher bracket holds the fire extinguisher in only 1 position. The space will require 2.25 inches on the passenger side and 2 inches on the drivers side at a point 8.5 inches above the steel floor and 5 inches in front of the parking brake pivot. |
|
BUC-010001 | Buckley Racing Fire Extinguisher Mount 911/911 Turbo (1965-89) [More Info] | $69.95 | |
| Rennline Fire Extinguisher Mount |
| Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike most fire extinguisher mounts available, all of Rennline's mounts install directly to the factory seats and do not compromise seat travel or leg room in anyway. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included. Available for both power and manual seats. |
|
| REN-FE03 | Rennline Fire Extinguisher Mount, for cars w/ Manual Seats, 911/911 Turbo (1974-98) [More Info] | $125.00 | |
REN-FE02 | Rennline Fire Extinguisher Mount, for cars w/ Power Seats, 911/911 Turbo (1974-98) [More Info] | $125.00 | |
Smuggler's Box Cover |
| Rennline Smuggler's Box covers are a direct replacement for your factory cover. Perfect for the light weight race car or the performance street car. This is a ideal set up for those of you who have already relocated your battery but need a clean way to finish off the project. All aluminum construction and a perfect location to mount a battery cut off switch. All covers come with all stainless steel hardware and new aluminum hinges. |
|
REN-EL07S | Rennline Smugglers Box Cover - Silver, each, 911/911 Turbo (1965-89) [More Info] | Temporarily unavailable | |
| REN-EL07B | Rennline Smugglers Box Cover - Black, each, 911/911 Turbo (1965-89) [More Info] | Temporarily unavailable | |
Rennline Firewall Block Off Plates |
| Removing the fan/defrost assembly is a standard modification on any lightweight 911 that is to be used for performance driving on or off the track. The only downside to this removal is that you are now left with holes in the firewall that are required to be filled for most organized track events. Rennlines block off kit comes with 5 specifically cut and formed shapes that allow you to plug these irregularly shaped holes in a matter of minutes. Available in anodized aluminum or black powdercoat, stainless steel hardware included. |
|
REN-I40-SI | Rennline Firewall Block Off Plate Kit, Silver, 911/911 Turbo (1965-84) [More Info] | $69.95 | |
REN-I40-B | Rennline Firewall Block Off Plate Kit, Black, 911/911 Turbo (1965-84) [More Info] | $69.95 | |
Belts |
| Has it been a while since you replaced your belts? Replace them before you get stranded, get two and keep a backup in the trunk. |
|
| 999-192-176-50-M21 | Alternator or Air Pump Belt, 10 x 710 (Service-Free belt), 911 (1974-75), 911 (1980-89), 911 Turbo (1976-79), 911 Turbo (1986-89)
Brand: Contitech [More Info] |  |
| $5.00 | |
999-192-176-50-M100 | Alternator or Air Pump Belt, 9.5 x 710 (NOT a Service-Free belt, may require retensioning), 911 (1974-75), 911 (1980-89), 911 Turbo (1976-79), 911 Turbo (1986-89), Each
Brand: Genuine Porsche [More Info] | |
| $12.75 | |
| 999-192-097-50-M21 | Alternator Belt, 911 (1976-79) (NOTE: this brand is 10 x 725)
Brand: Contitech [More Info] | |
| $5.25 | |
| 999-192-097-50-M100 | Alternator Belt, 911 (1976-79) (NOTE: this brand is 9.5 x 725)
Brand: Genuine Porsche [More Info] | |
| $12.75 | |
| 900-192-027-50-M21 | A/C Belt (Factory Air, York Compressor), 911 (1974-79), 911 Turbo (1976-77), 911 (1980-83), 13.0x1100
Brand: Contitech [More Info] | |
| $9.50 | |
| 999-192-305-50-M21 | A/C Belt, 911 Turbo (1978-79), 13.0x1125
Brand: Contitech [More Info] | |
| $9.75 | |
| 999-192-173-50-M21 | A/C Belt for Axial compressor (13.0 x 1200mm), 911 (1978-83 ), 911 turbo (1978-79)
Brand: Contitech [More Info] | |
| $9.75 | |
| 999-192-254-50-M21 | A/C Belt, 911 (1984-89), 13.0x1155
Brand: Contitech [More Info] | |
| $9.75 | |
| 999-192-173-50-M21 | A/C Belt, 911 Turbo (1986-89), 13.0x1200
Brand: Contitech [More Info] | |
| $9.75 | |
| 900-192-005-50-OEM | Air Pump Belt, 911 (1975), 10x975
Brand: Genuine Porsche [More Info] | $12.50 | |
| 999-192-018-50-M21 | Air Pump Belt, 911 (1975 CAL), 10x925
Brand: Contitech [More Info] | |
| $5.75 | |
| 999-192-236-50-M21 | Air Pump Belt (10x950), 911 (1976, 49-state), 911 (1977-83)
Brand: Contitech [More Info] | |
| $6.00 | |
| 999-192-102-50-OEM | Air Pump Belt, 72 tooth, 911 Turbo (1976-77)
Brand: Genuine Porsche [More Info] | $29.75 | |
| 999-192-095-50-OEM | Intermediate Belt to Air Pump, 80 tooth, 911 Turbo (1976-77)
Brand: Genuine Porsche [More Info] | $30.00 | |
| 999-192-131-50-M51 | Air Pump Belt, 911 Turbo (1978-79), 911 Turbo (1986-89),
Brand: Gates [More Info] | |
| $14.50 | |
