| Porsche 911 & Carrera Miscellaneous - Page 19 |
Alloy Wheel Center Caps |
Hand-Painted Center Crest Caps
(Vibrantly Hand-painted Porsche crest) |
| PEL-911-HC-18 | Hand-Painted Center Crest Cap, Silver
Late 911 Fuchs Alloy, (4 per car, sold per each) [More Info] | $72.95 |  |
| PEL-911-HC-19 | Hand-Painted Center Crest Cap, Silver
Late 911 Fuchs Alloy, set of four [More Info] | $259.95 | |
| PEL-911-HC-20 | Hand-Painted Center Crest Cap, Black
Late 911 Fuchs Alloy, (4 per car, sold per each) [More Info] | $69.95 | |
| PEL-911-HC-21 | Hand-Painted Center Crest Cap, Black
Late 911 Fuchs Alloy, set of four [More Info] | $233.95 | |
Center Cap Security Locks
(Protect your investment from petty thieves) |
| Secure your original Fuchs center caps from theft by installing these billet aluminum locking rings. Fits inside Porsche O.E.M. Fuchs hubcaps (ring-clip style) that have 70mm openings. Sold as a set of four. |
|
PEL-PP905952 | Fuchs Center Cap Locking Rings, for caps w/ ring clips (70mm hole), Set of Four (not for 3-pronged caps) [More Info] | $39.95 | |
Linea Corse Fox Wheels |
| They're here! These Linea Corse wheels are inspired by the original Fuchs design but made in 17-inch sizes to fit your classic 911! Fits 911SC/Carrera (1978-89) or cars with compatible wheel flares. Sold in complete sets of 4. Tires are not included. Accepts standard center caps - available separately. |
|
LC-FOX-POL | Linea Corse (Rota) Fox 1 (Polished) Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [More Info] | $1599.00 | |
LC-FOX-1 | Linea Corse (Rota) Fox 1 (RSR) Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [More Info] | $1299.00 | |
LC-FOX-3 | Linea Corse (Rota) Fox 3 (Satin Black w/ Satin Silver Lip) Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [More Info] | $1199.00 | |
LC-FOX-S | Linea Corse (Rota) Fox Flat Silver Wheel Set, includes: (2) Front - 17x7.5in (+35mm offset), (2) Rear - 17x9in (+16mm offset), bolt pattern - 5x130 [More Info] | Temporarily unavailable | |
Replica Fuchs Alloy Wheels |
| Euromeisterญฎ presents these Alloy Replica 5-spoke style wheels. Manufactured using water & air cooled low pressure casting equipment resulting in the strongest and lightest cast aluminum wheels on the market. This design allows them to manufacture a wheel only slightly heavier than a more expensive forged wheel. Finished wheels are then completely X-Rayed to insure quality and strength. Wheels come with black centers and a machined lip. All wheels are hub-centric with the standard 5x130mm lug pattern. Euromeisterฎ Wheels utilize original factory offsets to fit 1965-89 911,912,930 with Carreraฎ or Turbo flares, 944 1983-86 except Turbo and 914-6 with GT Flares. Wheels accept the original 70mm ring clip cap standard on most Porscheฎ vehicles. Center caps and lug nuts sold separate. |
|
PEL-915737 | Euromeister Alloy Replica Wheel, 16x7 (23.3 offset), Each [More Info] | $199.95 | |
PEL-915738 | Euromeister Alloy Replica Wheel, 16x8 (10.6 offset), Each [More Info] | $229.95 | |
PEL-915739 | Euromeister Alloy Replica Wheel, 16x9 (15.0 offset), Each [More Info] | $249.95 | |
Oil Cooler Air Scoop |
| Does your Porsche operate at a higher oil temp than you would like ? With our custom made oil cooler scoop, this will no longer be a problem. Direct cooling air right onto the oil cooler. Manufactured out of fiberglass, the grain and texture of this scoop is designed to match the look of the rubber bumper pieces. Blends in so well, you would hardly know that its there, except for the cooler temperatures! |
|
PEL-JM-DUCT | Oil Cooler Air Scoop [More Info] | $96.80 | |
Cup Holder |
Finally, the cup-holder Porsche owners have always needed. Cups, cans and water bottles at your fingertips. Far enough over to avoid interference when shifting, yet at your fingertips when needed. The ingenuous design locks into your cigarette lighter port with an expanding plug and stays there until you remove it with a quick turn of the thumbscrew. All steel construction with an insulated end and black powder-coated for a tough, long-lasting finish. Are you tired of cup-holders that wont stick where you put them; drinks leaking into your door pockets because you forgot they were there when you closed the door? Tested with over 2 lbs. of ballast for over 2 months to ensure a strong and secure holder.
A cup-holder mounted closest to the center of the car is less likely to spill and the most convenient location for the driver. |
|
PEL-JM-CUP | Cup Holder, 911 (1974-89), 912 All, Aftermarket [More Info] | $37.75 | |
