| Porsche 911 & Carrera Seats, Belts & Upholstery - Page 7 |
Sport Seats |
| The LeMans Seat |
| The LeMans is currently the lightest seat of this collection and is used as a vintage race seat as a bolt in replacement and upgrade for the Porsche 914. Currently redesigned to give a lower and less forward seating position, it now also allows a much easier installation with sliders in any other car. |
|
GTS-5202 | LeMans Sport Seat - Leatherette/Basket Weave - Black, each [More Info] | $695.00 |  |
GTS-5200 | LeMans Sport Seat - Leatherette/Corduroy - Black, each [More Info] | $695.00 | |
| GTS-5204 | LeMans Sport Seat - Leather/Corduroy - Black, each [More Info] | $875.00 | |
| GTS-5203 | LeMans Sport Seat - Perforated Leather - Black, each [More Info] | $995.00 | |
| The Sport S Seat |
| The classic seat of the late 60s and early 70s was the Recaro Ideal. Featured in Porsches, BMWs and later on in various German sport coupes, this seat has made history. GTS Classic went as far as reproducing the shape of the foam pads to ensure that each seat has exact the shape and form you want and expect. Like the original, the seat tilts forward, but for better access to the rear we offer the optional tilting bracket to lift the complete seat. Also available with this seat are adjustable headrests. NOTE: Provisions for harness usage are not available for the Sport S. |
|
GTS-5702 | Sport S Reclinable Sport Seat - Leatherette/Basket Weave - Black, each [More Info] | $1195.00 | |
| GTS-5700 | Sport S Reclinable Sport Seat - Leatherette/Corduroy - Black, each [More Info] | $1195.00 | |
| GTS-5704 | Sport S Reclinable Sport Seat - Perforated Leather/Corduroy - Black, each [More Info] | $1395.00 | |
| GTS-5701 | Sport S Reclinable Sport Seat - Leather - Black, each [More Info] | $1455.00 | |
| GTS-5703 | Sport S Reclinable Sport Seat - Perforated Leather - Black, each [More Info] | $1495.00 | |
| Seat Hardware |
| GTS-BRK-911M | Basic Mounting Bracket Set for one GTS Seat - Porsche 911 (1974-88) [More Info] | $98.00 | |
GTS-TILT-1 | Tilting Bracket for GTS Classic Seat [More Info] | $149.00 | |
GTS-HARNS | Provision for 5 or 6-Point Harness - Option for GTS Classic (with seat purchase only) [More Info] | $78.00 | |
Harness Bars |
| Weltmeister Harness Bar |
| Made from thick-wall, large 1-1/2" diameter roll bar tubing, for the extra-strength you're looking for. Weltmeister(tm) harness bars are finished in durable rich-looking powder-coated black finish that adds a long-lasting factory-style appearance to your interior. Each harness bar has guides to keep your shoulder harness belts in place. Note: There is no front seat movement restriction in the 912E, 911 or the 911 Turbo bolt-in harness bars - even for taller drivers! |
|
PEL-910185 | Weltmeister Harness Bar, Coupe, 912E, 911/911 Turbo (1974-89) [More Info] | Temporarily unavailable | |
PEL-915614 | Weltmeister Harness Bar (Satin Finish Stainless Steel), Targa, 911/911 Turbo (1974-93) [More Info] | $479.99 | |
| Brey-Krause Harness Bars |
| Brey-Krause harness bars not only guide the driving harnesses, but allow them to be mounted directly to the bar. Their bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. |
|
BK-R-1010 | Brey-Krause Harness Guide Bar - 911 Coupe (1974-98) [More Info] | $330.00 | |
BK-R-1015 | Brey-Krause Harness Guide Bar - 911 Targa (1974-1993) [More Info] | $440.00 | |
In response to the many requests from Porsche drivers looking for a harness guide bar that would not only guide their driving harnesses, but also allow them to mount their harnesses directly to the bar, we developed the "Harness Truss". The Harness Truss has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. It's strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The Harness Truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type of machining is accurate and does not create heat effected areas in the metal which can alter tensile strength.
Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.
Material: 6061-T6 aluminum skeleton and reinforcing bar. Type 304 stainless steel brackets.
Finish: Anodized aluminum with satin stainless mounting brackets.
Weight: 9.44 lbs.
Models: 911 Coupes '74 - '98
Installation: Bar attaches to factory mounting points in "B" pillars.
Miscellaneous: Harness Truss is designed to allow enough seat travel for tall drivers. The stainless steel mounting brackets can be left installed in the "B" pillars to easily remove and remount the bar in minutes. R-9018 Adapter Bracket - is available to attach Brey-Krause seat brace
Models: R-9019 or R-9020. |
|
BK-R-1025 | Brey-Krause Harness Truss - 911 Coupe (1974-98) [More Info] | $641.00 | |
