| Porsche 911 & Carrera Exhaust Pipes - Page 5 |
Headers |
| GHL Stainless Steel Headers |
Increase your horsepower rating with bolt-on performance. The GHL header system increases your horsepower by decreasing back pressure and smoothing out exhaust flow. Great for racing upgrades! Sold in pairs. Header measurement size is at outside diameter of tubing.
They are manufactured with 321 and 304 stainless steel and tig welded. All components fit the car without alteration to the original design. With the addition of a GHL header to your car, horsepower will increase up to 30 HP. Most impressive is your turbo will spool up approximately 750 RPM sooner. 911 Header and Muffler will increase performance 12.3HP. Most impressive is your power gain is available at all levels of driving. |
|
| Bursch Headers |
| Increase your horsepower rating with bolt-on performance. The Bursch header system increases your horsepower by decreasing back pressure and smoothing out exhaust flow. Choose between 1-5/8" or 1-3/4" for tuning your exhaust to your engine size. Great for racing upgrades! Sold in pairs. Header measurement size is at outside diameter of tubing. |
|
 PEL-BURH-911-01 | 911 Header 1-5/8" (recommended under 3.0L) | $495.00 |  |
 PEL-BURH-911-02 | 911 Header 1-3/4" (recommended 3.0L+) Sold in Pair | $495.00 |  |
 PEL-BURH-911-00 | 911 Header 1-1/2" for 2.2L (recommended for mild 2.7L and under), Sold in Pair | $495.00 |  |
Exhaust Hardware |
| Exhaust Nuts |
| Don't get all exhausted trying to put standard nuts on your heads. These are special nuts that have a captivated locking mechanism that will resist high heat (nyloc won't work here), and will not come loose. |
|
 900-910-097-02-OEM | Exhaust Lock Nut (sold per each, 6 req.), 911 (1974-89), 911 Turbo (1978-89) Brand: Genuine Porsche [Photo] | $2.00 |  |
 999-085-001-02-M260 | Exhaust Barrel Nut (sold per each, 6 req.), 911 (1974-89), 911 Turbo (1978-89) Brand: OEM [Photo] [Photo] |  |
| $3.00 |  |
 11-62-1-711-954-M58 | Copper Lock Nut, 8mm, As Needed Brand: Fischer & Plath |  |
| $0.50 |  |
| Muffler Hardware |
| Most often than not, the hardware that secures the muffler to the rest of the exhaust has rusted or will snap off at the slightest turn of a wrench. Have these new items on hand to replace all the damaged hardware on your exhaust, and do the job right the first time. |
|
| 900-075-148-02-OEM | Hex Head Bolt, M10 X 32mm, heat exchanger to muffler (sold per each), 911 (1974-89) Brand: Genuine Porsche | No Longer Available | |
| 999-084-002-02-OEM | Hex Head Nut, M10, heat exchanger to muffler (sold per each), 911 (1974-89) Brand: Genuine Porsche | $1.75 |  |
Exhaust Gaskets |
| These are the gaskets that connect your exhaust system together. Replace them whenever you remove any exhaust components. Do not use the cheesy paper gaskets that sometimes come with muffler kits. These gaskets are the real thing with metal reinforced ends. Keeping your exhaust components is vital to sealing your car, keeping your engine running better, preventing backfires, and keeping poisonous carbon monoxide (CO) out of your heater system. |
|
| Muffler Gaskets |
 901-111-193-00-M17 | Muffler Gasket (sold per each, 2 required), 911 (1974), 911 (1975-76 CA Model), 911 (1977) Brand: Victor Reinz [Photo] [Photo] |  |
| $5.75 |  |
 911-111-191-01-M17 | Muffler Gasket, 911 (1975-76 49 State), 911 (1978-89) Brand: Victor Reinz [Photo] [Photo] |  |
| $4.50 |  |
 930-123-191-05-M17 | Muffler Gasket, 911 Turbo (1976-89) Brand: Victor Reinz [Photo] [Photo] |  |
| $12.75 |  |
 923-111-151-01-M100 | Muffler Gasket (sold per each, 2 required), 912E (1976) Brand: Genuine Porsche [Photo] |  |
| $24.75 |  |