| Porsche 911 & Carrera Mufflers - Page 6 |
Oxygen (O2) Sensors |
| The oxygen sensor actively measures the exhaust output from the engine in order to determine the proper mixture for the car. If you are having trouble adjusting the mixture on your car to proper levels, there is a high chance that you may have a faulty oxygen sensor. The oxygen sensor is located before the catalytic converter because the air/fuel mixture ratio cannot be accurately calculated after the exhaust gases have been processed through the CAT. |
|
| 928-606-124-00-M14 | | $126.50 |  |
| 965-606-126-01-M14 | Oxygen Sensor (grommet not included), 911 (1986-89), 911 Turbo (1986-94), 911 C2/C4 (1989-94)
Brand: Bosch [More Info] |  |
| $126.25 | |
| 911-606-123-00-M14 | | $72.00 | |
821-951-253-M14 | Oxygen Sensor Relay, 911 (1980-89)
Brand: Bosch [More Info] | |
| $10.75 | |
15735-M14 | Univeral 3 Wire Bosch Oxygen Sensor, 911 (1984-89), 911 Turbo (1986-94), 911 C2/C4 (1989-94), Each
Brand: Bosch [More Info] | |
| $71.75 | |
11027-M14 | Oxygen Sensor, Universal 1-Wire, (Re-use connector from old sensor), 911/911 Turbo (1980-83), Each
Brand: Bosch [More Info] | |
| $21.25 | |
PEL-4491B | Oxygen Sensor Removal Tool, 22mm, 3/8" drive [More Info] | $21.80 | |
Anti-Seize Lubricant |
| Using a quality anti-seize lubricant now can save you hours of pain-staking work the next time you attempt to remove that old hardware. These premium compounds offer high temperature resistance, corrosion protection, and good electrical conductivity. |
|
2012-M19 | | $8.25 | |
WRTH-8938132 | Wurth CU 1100 Copper Paste, 1 lb [More Info] | $25.00 | |
Wurth Exhaust Assembly Paste |
| Soft paste for fast, easy gas tight sealing of flanges and slip fittings in the exhaust system. No welding necessary. Sets with exhaust heat. Temperature resistant up to approximately 1292° F |
|
WRTH-100045 | Wurth Exhaust Assembly Paste, 140 gram tube [More Info] | $14.95 | |
