| Porsche 911 & Carrera Engine Rebuild Wizard - Page 1 |
Pelican Parts Engine Rebuild Wizard |
 | Written by Pelican Parts' own Wayne R. Dempsey, the Engine Rebuild Parts Wizard will guide you through all the steps required to obtain and source the part for your engine rebuild. Walking you carefully through each step, the 911 Engine Rebuild Parts Wizard helps you choose the parts that you need for your rebuild, while making sure that you don't end up with the wrong parts or something that you don't need. Through 13 easy-to-follow steps, Wayne guides you through the rebuild process and discusses the options for your engine, as if he was standing right next to you!
Click here to view the 911 Engine Rebuild Parts Wizard! |
|
|
Tools and Books |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Don't cheap out - you're saving money by doing it yourself. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. |
|
| Porsche Engine Rebuild Stand |
| Planning on rebuilding your engine? You shouldn't even think of it without the proper engine stand. There are cheap, generic engine stands available that will fit your engine with a bit of modifications, but in order to have a firm support of the entire weight of the motor, you should use one specifically designed for the case itself. This fixture is made of heavy-duty steel, and has five arms that can support the full weight of even a complete 930 motor with fuel injection and exhaust! This engine holding fixture can be used with the yokes on most regular engine stands, or you can use the Heavy Duty Clamp which will allow you to bolt the stand to a sturdy (very, very sturdy) table top. The diameter of the shaft is 60mm. This engine holding fixture will fit any model 911, 912, 356, 930, 914 and any air-cooled VW engine. |
|
PEL-TOL-P201 | Engine Holding Fixture P201 (made in Europe) [Photo] | $199.00 |  |
PEL-TOL-SIR313 | Heavy Duty Engine Stand Clamp [Photo] | $169.80 | |
PEL-TOL-SIR215 | Flywheel Lock - This flywheel lock only works with the P201 engine yoke. [Photo] | $27.00 | |
PEL-UN1201100 | Heavy Duty Flywheel Lock (for use on engine), 911 (1965-89), 912 (1965-69) [Photo] | $23.15 | |
| Engine Stand Adapter Ring |
This Engine Stand Adapter Ring will easily bolt onto any universal engine stand, using four 3/8" bolts, giving you a safe and easy way to work on any 356 to 930 Porsche engine. This is a very heavy-duty piece that is machined from solid steel, with all the right notches and relief angles to accommodate all Porsche and VW air cooled engines.
NOTE: Universally adjustable adapter not included with ring. These come with most engine stands available here. |
|
PEL-TOL-MCDENG | Engine Stand Adapter Ring for Porsche and VW air-cooled engines [Photo] | $145.00 | |
| U-Base Engine Stand |
• Heavy duty mounting plate and adapter arms for servicing light truck and car engines
• Heavy-duty four wheeled base increases stability
• Wide 'mouth' base opening works with most mobile engine cranes
• Fixed polyurethane back wheels; poly swivel castors on front for smooth travel
• 24" handle makes easy work of rotating the engine 360 degrees; hitch pin locks engine in place
• Built-in tool tray keeps frequently needed tools right close to work area
• OTC 2 year warranty
Manufacturer: OTC DIVISION OF SPX CORP
Click here to visit the manufacturer's home page
Not exactly what you're looking for? Check out the rest of the selection here! |
|
TOL-OTC2012 | U-Base Engine Stand - 1250 lbs [Photo] | $129.00 | |
| Engine Yoke Securing Nuts |
| Finally, a clean and elegant way to secure your 911 engine to the factory-style yoke - no more sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length engine case studs to the yoke. Not only will you no longer need to hunt for the right combination of hardware to fit, but with the built-in clearance of these stainless steel nuts and adapters, you will be able to easily install and remove flywheels and clutch assemblies while the engine is on the stand! |
|
STOMSKI-SR028 | Stomski Racing Engine Yoke Securing Nut/Adapter Set, for Porsche engine stand fixtures (P201) [Photo] | Temporarily unavailable | |
| Flywheel Socket |
| Get the correct socket to remove/install those Flywheel Bolts! |
|
TOL-SK41422 | Flywheel Socket [Photo] [Photo] | $16.00 | |
| Oil Seal Installation Tools |
| When rebuilding your motor, do the job right with our oil seal installation tools. Designed to perform an installation that is perfectly aligned with the case, these installation tools will guarantee a leak-free seal, without damaging your valuable case. |
|
PEL-TOL-P215 | Oil Seal Installation Tool for 911 (1965-77), Flywheel Side [Photo] | $113.00 | |
PEL-TOL-P234 | Oil Seal Installation Tool for 911 (1978-94), Flywheel Side [Photo] | $134.00 | |
PEL-TOL-P216 | Oil Seal Installation Tool for 911 (1965-89), Pulley Side [Photo] | $56.00 | |
