| Porsche 911 & Carrera Main Engine Components - Page 1 |
Main Bearing Sets |
| Rebuilding your engine is a process that should be done right. Replace your main bearings every time you tear down your engine to the core. Bearing sets are available in standard sizes, and also in undersizes as well. For 1975 cars, contact us to find out what bearing size you need - we will need to know the engine serial number. NOTE: Bearing sets DO NOT COME WITH NOSE BEARING. See below for nose bearing. |
|
911-101-901-00-M41 | Main Bearing Set, standard size
911 (1974-early 1975)
Brand: Glyco [Photo] [Photo] |  |
| $232.00 |  |
| 911-101-901-50-SET | Main Bearing Set, includes: 1 Number 8 Nose Bearing, 2 Bearing Shell I (2 halves), 12 Bearing Shell II-VII (12 halves), .25mm undersize
911 (1974-early 1975)
Brand: Genuine Porsche | $560.75 | |
| 911-101-901-55-SET | Main Bearing Set, includes: 1 Number 8 Nose Bearing, 2 Bearing Shell I (2 halves), 12 Bearing Shell II-VII (12 halves), .50mm undersize
911 (1974-early 1975)
Brand: Genuine Porsche | $612.00 | |
911-101-902-00-M41 | Main Bearing Set, standard size
911 (late 1975-77), 911 Turbo 3.0L (1976-77)
Brand: Glyco [Photo] | |
| $145.00 | |
| 911-101-902-50-OEM | Main Bearing Set (pair), .25mm undersize
911 (late 1975-77), 911 Turbo 3.0L (1976-77)
Brand: Genuine Porsche | No Longer Available | |
964-101-901-00-M41 | Main Bearing Set, standard size
911/911 Turbo 3.3L (1978-89)
Brand: Glyco [Photo] [Photo] | |
| $253.25 | |
964-101-901-51-M100 | Main Bearing Set (pair), .25mm undersize
911/911 Turbo 3.3L (1978-89)
Brand: Genuine Porsche [Photo] [Photo] | |
| $1187.75 | |
| Number 8 Nose Bearing (not included in above sets) |
901-101-138-03-M127 | Number 8 Nose Bearing, standard size
911 (1974-77), 911 Turbo 3.0L (1976-77)
Brand: German [Photo] [Photo] | |
| $142.00 | |
| 901-101-138-53-OEM | Number 8 Nose Bearing, .25mm undersize
911 (1974-77), 911 Turbo 3.0L (1976-77)
Brand: Genuine Porsche | $181.75 | |
964-101-138-01-M127 | Number 8 Nose Bearing, standard size
911/911 Turbo 3.3L (1978-89)
Brand: German [Photo] [Photo] | |
| $240.50 | |
M-101-138-53 | Number 8 Nose Bearing, .25mm undersize
911/911 Turbo 3.3L (1978-89) [Photo] | No Longer Available | |
Rod Bearing Sets |
| Rod bearings are a must for any full engine rebuild. Put a new spin on your rebuild with new bearings! Note that they must be matched to the current grind on the crankshaft. |
|
914-103-141-00-M41 | Rod Bearing Set, standard size
911 2.7L/911 Turbo 3.0L (1974-77)
Brand: Glyco [Photo] [Photo] | |
| $65.00 | |
914-103-141-50-M100 | Rod Bearing Shell, .25mm undersize
911 2.7L/911 Turbo 3.0L (1974-77), 12 required, sold per each
Brand: Genuine Porsche [Photo] | |
| $29.50 | |
930-103-148-00-M41 | Rod Bearing Set, standard size
911SC 3.0L(1978-83)
Brand: Glyco [Photo] [Photo] | |
| $122.75 | |
| 930-103-148-50-OEM | Rod Bearing Shell, .25mm undersize, 12 required, sold per each
911SC 3.0L (1978-83)
Brand: Genuine Porsche | $25.75 | |
930-103-147-15-M41 | Rod Bearing Set, standard size
911 Carrera 3.2L/911 Turbo 3.3L (1978-89)
Brand: Glyco [Photo] [Photo] | |
| $185.50 | |
| 930-103-147-50-OEM | Rod Bearing Shell, .25mm undersize
911 Carrera 3.2L/911 Turbo 3.3L (1978-89), 12 required, sold per each
Brand: Genuine Porsche | $101.50 | |
Intermediate Shaft Bearings |
| Replace your intermediate shaft bearings, and gears if doing a full rebuild and worried about wear from previous miles. |
|
996-101-435-70-M41 | Intermediate Shaft Inner Bearings, each 2-req, 911 (1974-89)
Brand: Glyco [Photo] | |
| $10.00 | |
996-101-137-80-M41 | Intermediate Shaft Outer Flanged Bearings, each 2-req, 911 (1974-89)
Brand: Glyco [Photo] | |
| $9.50 | |
