| Porsche 911 & Carrera Cam Towers & Timing Chains - Page 2 |
Camshafts |
| Camshaft Components |
| These items begin to show signs of wear also and are just as susceptible to failure. Replace those parts and be glad you did it right the first time! |
|
| 901-105-546-02-M260 | Cam Sprocket (2 required), 911/911 Turbo (1974-89) Brand: OEM [Photo] [Photo] |  |
| $79.00 |  |
| 901-105-583-01-M100 | Adjustment Flange (2 required), 911/911 Turbo (1974-89) Brand: Genuine Porsche [Photo] [Photo] |  |
| $32.00 |  |
| 900-243-001-00-M100 | Dowel Pin (2 required), 911/911 Turbo (1974-89) Brand: Genuine Porsche [Photo] [Photo] |  |
| $1.50 |  |
| 901-105-561-00-M260 | Shim (use as required), 911/911 Turbo (1974-89) Brand: OEM [Photo] [Photo] |  |
| $1.75 |  |
| 901-105-562-00-M100 | Washer (2 required), 911/911 Turbo (1974-89) Brand: Genuine Porsche [Photo] [Photo] |  |
| $9.00 |  |
 930-105-196-00-M100 | Cover Plate (2 required), 911/911 Turbo (1974-89) Brand: Genuine Porsche [Photo] [Photo] |  |
| $44.00 |  |
| 999-701-468-40-M213 | Cover Plate O-Ring (67.5 X 75.4 X 4mm, 2 required), 911/911 Turbo (1974-89) Brand: D P H [Photo] [Photo] |  |
| $3.00 |  |
| 930-105-197-05-M17 | Cover Plate Gasket (2 required), 911/911 Turbo (1974-89) Brand: Victor Reinz [Photo] [Photo] |  |
| $1.50 |  |
| N-012-708-2-M100 | Woodruff Key (4 X 5mm, 2 required), 911/911 Turbo (1974-89) Brand: Genuine Porsche [Photo] [Photo] |  |
| $1.00 |  |
 900-028-021-02-OEM | Spring Washer (30mm, 2 required), 911/911 Turbo (1974-81) Brand: Genuine Porsche [Photo] | No Longer Available | |
 901-105-172-00-OEM | Nut (2 required), 911/911 Turbo (1974-81) Brand: Genuine Porsche [Photo] | $39.00 |  |
| 993-105-163-50-M260 | Washer (2 required), 911/911 Turbo (1982-89) Brand: OEM [Photo] [Photo] |  |
| $15.50 |  |
| 900-082-072-01-M100 | Bolt (M12 X 1.5 X 50mm, 2 required), 911/911 Turbo (1982-89) Brand: Genuine Porsche [Photo] [Photo] |  |
| $4.25 |  |
| 900-243-001-00-M100 | Dowel Pin for Camshaft Drive Gear, 8 x 14mm, 911 (1965-98), 911 Turbo (1976-97) Brand: Genuine Porsche [Photo] |  |
| $1.50 |  |
Rocker Arms & Valvetrain |
| If you're rebuilding your cylinder heads, we have what you need. Rocker shafts wear out over time as do the adjusting screws. Change out those necessary items and bring your engine back up to factory specs. |
|
| 901-105-342-04-M196 | Rocker Shaft (12 required), 911/911 Turbo (1974-89) Brand: Mahle-Wizemann [Photo] [Photo] |  |
| $23.25 |  |
| 901-105-376-02-M260 | Rocker Shaft Nut (12 required), 911/911 Turbo (1974-89) Brand: OEM [Photo] [Photo] |  |
| $5.50 |  |
| 901-105-344-02-M260 | Rocker Arm Shaft Cone/Bushing (12 required), 911/911 Turbo (1974-89) Brand: OEM [Photo] [Photo] |  |
| $3.75 |  |
| 99-0579-052-M260 | Rocker Arm Shaft Inner Seal (used originally on RSR cars only, sold per each, 24 required) 911 (1965-94), 914/6, 911 Turbo (1976-94) Brand: OEM [Photo] [Photo] |  |
| $4.25 |  |
| 999-067-008-00-M260 | Allen Bolt (M7 X 48, 12 required), 911/911 Turbo (1974-89) Brand: OEM [Photo] [Photo] |  |
| $6.00 |  |
| 930-105-043-00-M260 | Rocker Arm (12 required), 911/911 Turbo (1965-94) Brand: OEM [Photo] |  |
| $78.25 |  |
| 901-105-370-02-M196 | Valve Adjusting Screw (12 required), 911/911 Turbo (1974-89) Brand: Mahle-Wizemann [Photo] [Photo] |  |
| $20.50 |  |
| 999-034-005-00-M36 | Valve Adjusting Nut (12 required), 911/911 Turbo (1974-89) Brand: Febi [Photo] [Photo] |  |
| $0.25 |  |