| Porsche 911 & Carrera Cam Towers & Timing Chains - Page 1 |
Engine Gasket Sets and Seals |
| Worried about engine leaks? Is your garage becoming a worthy candidate for an EPA Superfund clean-up project? Seal your engines fate with our rebuild gasket sets. |
|
| Miscellaneous Engine Seals |
| We also carry individual gaskets, o-rings and seals for your convenience. |
|
999-701-468-40-M213 | Cam Gear and End Plate O-Ring (67.5 X 75.4 X 4mm), 911 (1974-89), 911 Turbo (1978-89)
Brand: D P H [Photo] [Photo] |  |
| $3.00 |  |
930-105-197-05-M17 | Camshaft End Plate Gasket, 911/911 Turbo (1974-89)
Brand: Victor Reinz [Photo] [Photo] | |
| $1.50 | |
999-707-112-40-M260 | OEM Outer Oil Return Tube Seal (sold per each, 2 req. per return tube), 911/911 Turbo (1974-89)
Brand: OEM [Photo] [Photo] | |
| $2.25 | |
999-707-113-40-M260 | Inner Seal for OEM Steel Expandable Oil Return Tubes Only (sold per each, 2 req. per return tube)
Brand: OEM [Photo] [Photo] | |
| $4.00 | |
| Oil Thermostat O-ring, 911/911 Turbo (1974-89) |
999-707-314-40-M17 | Oil Thermostat O-ring, 911/911 Turbo (1974-89)
Brand: Victor Reinz [Photo] | |
| $2.00 | |
999-707-314-40-M213 | Oil Thermostat O-ring, 911/911 Turbo (1974-89)
Brand: D P H [Photo] [Photo] | |
| $2.00 | |
| Camshaft Housing Gaskets |
| This area is sometimes prone to annoying leaks. |
|
930-105-193-06-M17 | Cam Housing/Engine Gasket (2 required per vehicle), 911 (1974-89)
Brand: Victor Reinz [Photo] [Photo] | |
| $3.25 | |
| Chain Cover Gaskets |
| These gaskets are notorious for leaking like a sieve. They are offered individually or in a complete kit with hardware for your convenience. |
|
930-105-191-03-M17 | Camshaft Housing Chain Cover Gasket, left (1974-89)
Brand: Victor Reinz [Photo] [Photo] | |
| $8.50 | |
930-105-192-04-M17 | Camshaft Housing Chain Cover Gasket, right (1974-89)
Brand: Victor Reinz [Photo] [Photo] | |
| $7.00 | |
10-0912-181-M194 | Chain Cover Gasket & Hardware Kit, 911 (1968-89)
Brand: OEM Parts [Photo] [Photo] | |
| $12.25 | |
Updated Camshaft Oil Line Restrictor Kit |
In 1991, Porsche redesigned the camshaft oil line restrictors with reduced diameter orifices on the 911 Turbo. The intended benefit was to reduce oil foaming within the camshaft housings while maintaining enough flow to effectively cool the valvetrain. However, additional benefits were apparent since the smaller orifices provided consistently higher oil pressure across the engine's full range of operation. Minimize the frothy cappuccino effect and increase your oil pressure simply by switching to these updated oil restrictors - installation is a piece of cake!
Includes two (2) restrictors, and six (6) sealing rings. |
|
PEL-CAMRSTN | Camshaft Oil Line Restrictor Fitting Adapter Kit - 911/911 Turbo (1965-89) [Photo] | $20.00 | |
Camshafts |
High mileage engines often have worn cam lobes and gears. Replace those pieces with our factory components.
When ordering camshafts, please have engine type number ready so that we may be able to provide the appropriate camshaft for your application. |
|
911-105-142-00-OEM | Camshaft (right), 911 (1974) for engine types 911.92/97
Brand: Genuine Porsche [Photo] | $1425.00 | |
911-105-141-00-OEM | Camshaft (left), 911 (1974) for engine types 911.92/97
Brand: Genuine Porsche [Photo] | $1425.00 | |
911-105-144-00-OEM | Camshaft (right), 911S (1974-77) for engine types 911.43/44/48/49/82/84/90/93/98
Brand: Genuine Porsche [Photo] | $1425.00 | |
911-105-143-00-OEM | Camshaft (left), 911S (1974-77) for engine types 911.43/44/48/49/82/84/90/93/98
Brand: Genuine Porsche [Photo] | $1425.00 | |
930-105-148-10-M196 | Camshaft (right), 911 (1978-89) up to 1981, also use bolt # 900-082-072-01 and washer # 930-105-163-00
Brand: Mahle-Wizemann [Photo] [Photo] | |
| $506.50 | |
930-105-147-10-OEM | Camshaft (left), 911 (1978-89) up to 1981, also use bolt # 900-082-072-01 and washer # 930-105-163-00
Brand: Genuine Porsche [Photo] | $879.50 | |
930-105-142-03-OEM | Camshaft (right), 911 Turbo (1976-89) up to 1981, also use bolt # 900-082-072-01 and washer # 930-105-163-00
Brand: Genuine Porsche [Photo] | $908.25 | |
930-105-143-03-OEM | Camshaft (left), 911 Turbo (1976-89) up to 1981, also use bolt # 900-082-072-01 and washer # 930-105-163-00
Brand: Genuine Porsche [Photo] | $1401.75 | |
