| Porsche 911 & Carrera Ignition - Page 3 |
Ignition Wire Sets |
| Clewett Engineering High Performance Ignition Wires |
| Clewett Engineering High Performance Ignition Wires are 8mm, with a 2 layer silicone jacket, wrapped in a 1200 degree protective sleeve. This Spiral Core, resistor conductor wire provides EMI/RFI suppression for all ignition and engine management systems. The connector ends are even numbered to reduce confusion! These wires are a great choice for either racing or street applications. Available in either Red or Black. Coil Wire include (Dielectric Grease not included). Wire separators sold separately. |
|
| CE-9192-28-B | Clewett Engineering High Performance Ignition Wires - BLACK, 911 (1970-83), 911 Turbo (1984-89) [More Info] | $149.95 |  |
 CE-9192-28-R | Clewett Engineering High Performance Ignition Wires - RED, 911 (1970-83), 911 Turbo (1984-89) [More Info] | $149.95 |  |
| CE-9192-20-B | Clewett Engineering High Performance Ignition Wires - BLACK, 911 3.2 Carrera (1985-89, will fit 1984 with rerouting) [More Info] | $154.95 |  |
 CE-9192-20-R | Clewett Engineering High Performance Ignition Wires - RED, 911 3.2 Carrera (1985-89, will fit 1984 with rerouting) [More Info] | $154.95 |  |
 CE-9191-18 | Spark Plug Wire Separator - 8.5mm - EACH [More Info] | $1.35 |  |
| Do-It-Yourself Beru Ignition Wires |
| This is a clever solution for those of you who can re-use your existing wire ends. Just unscrew the connectors from your old ignition and coil wires and attach them to these new wires. The OEM-spec Beru wires come cut to length per Porsche's wire templates and use Beru M3 brass terminals crimped on each end. The supplier even uses the proprietary Beru tool to crimp the M3s in place! Instructions are included. IMPORTANT NOTE: There are two lengths of wire sets for 3.2 Carreras. To see which set you need, measure the length of your #1 cylinder. If it is 11.5", you need the Short set. If it is 14.5" long, then you need the Long set. |
|
 P8489-911S-R | Do-It-Yourself Ignition Wire Set, Red, 911 (1984-89) non-turbo with SHORT 11.5" #1 Cylinder Wire [More Info] | $89.00 |  |
 P8489-911L-R | Do-It-Yourself Ignition Wire Set, Red, 911 (1984-89) non-turbo with LONG 14.5" #1 Cylinder Wire [More Info] | $89.00 |  |
| Fyrebraid Ignition Wires |
| Manufactured just like the Heavy Duty wire sets, only these wires offer the "Fyrebraid" Hi Temperature covering that can withstand up to 1400 degrees Fahrenheit |
|
 PEL-PP903519 | Fyrebraid Ignition Wire Set, 912 (1965-69) [More Info] | $45.95 |  |
 PEL-PP903539 | Fyrebraid Ignition Wire Set, 912E (1976) [More Info] | $51.40 |  |
 PEL-PP903541 | Fyrebraid Ignition Wire Set, 911 (1965-83) [More Info] | $182.40 |  |
 PEL-PP901319 | Fyrebraid Ignition Wire Set, 911 Carrera (1984) [More Info] | $232.75 |  |
 PEL-PP901321 | Fyrebraid Ignition Wire Set, 911 Carrera (1985-89) [More Info] | $255.65 |  |
 PEL-PP903541 | Fyrebraid Ignition Wire Set, 911 Turbo (1976-89) [More Info] | $182.40 |  |
| Competizone Heavy Duty Ignition Wires |
| We call them Heavy Duty because they feature a tough outer silicone jacket (blue color) that can withstand up to 600 degrees Fahrenheit. Manufactured similar to the standard wire sets, but with just a little more added protection for that extra edge. |
|
| PEL-PP903538 | Heavy Duty Ignition Wires, 912E (1976) [More Info] | $39.00 |  |
| PEL-PP903540 | Heavy Duty Ignition Wires, 911 (1965-73) [More Info] | $157.99 |  |
| PEL-PP901318 | Heavy Duty Ignition Wires, with Stainless Outer Braiding, 911 (1974-83) [More Info] | $297.95 |  |
| PEL-PP903556 | Heavy Duty Ignition Wires, 911 Carrera (1984) [More Info] | $199.99 |  |
| PEL-PP901320 | Heavy Duty Ignition Wires, 911 Carrera (1985-89) [More Info] | $199.95 |  |
| PEL-PP901317 | Heavy Duty Ignition Wires, 911 C2/C4 (1989-94) [More Info] | $519.99 |  |
| PEL-PP901318 | Heavy Duty Ignition Wires, with Stainless Outer Braiding, 911 Turbo (1976-89) [More Info] | $297.95 |  |
| PEL-PP901322 | Heavy Duty Ignition Wires, 911 Turbo 3.3l (1991-92) [More Info] | $250.75 |  |
| PEL-PP901323 | Heavy Duty Ignition Wires, 911 Turbo 3.6l (1993-1994) [More Info] | $348.70 |  |