| | 
| Speed Bleeder Valves Click Here to Order |  | |  | | | These little valves are the greatest innovation in bleeding your brakes! With the Speed Bleeder Valves, you can now truly make bleeding your brakes a one-person operation, fast and easy! Once installed, these valves become a permanent part of your brake system. The Speed Bleeders contain a small check valve that prevents air from entering back into the system once the old fluid exits. To bleed your brake system, simply open the valves and stomp on the brake pedal a few times. There are 2 bleeder valves and dust caps per package. - 'M' Front & Rear brake calipers are made of Steel and have approximately a 3 inch, center to center, bolt spacing. These were used as front calipers up until early 1975.
- 'S' Front brake calipers are made of Aluminum and have approx. a 3 1/2 inch, center to center, bolt spacing. These were used on some 911s and all 911 Turbos between 1974 and 1977.
- 'A' Front brake calipers are made of Steel and have approx. a 3 1/2 inch, center to center, bolt spacing. These were used on many mid-70s 911s and practically all 911SCs. Beginning in 1984, the Carrera used wider versions of 911SC calipers - the 'wide A' and 'wide M'.
| |  | |  |
|
| | | ||||
Speed Bleeder Valves, "M" Front/Rear Caliper, (sold per pair, one valve per caliper)
Front 911 (1969-early 75)
Rear 911 (1969-89) | $12.75 | PEL-SB7100 |  | Speed Bleeder Valves, "S" Front Caliper, (sold per pair, 2 valves per caliper)
Front 911/911 Turbo (1969-77) | $12.75 | PEL-SB1010S | | Speed Bleeder Valves, "A" Front Caliper, (sold per pair, one valve per caliper)
Front 911 (late 1975-89) | $12.75 | PEL-SB8125LL | |
|
   | |
| | |
|
