| Porsche 911 & Carrera Brake Pads & Rotors - Page 4 |
High Performance Drilled Brake Rotors |
| Looking for added performance? Looking to improve the 'feel' and cooling of your stock 911 brakes? These rotors are cross-drilled for improved brake cooling and better brake performance. Cross drilling of rotors is standard on the 911 Turbo and Porsche factory race cars. The cross drilling allows water to escape on wet days, and also funnels air through the brake system, allowing for better cooling. |
|
477-405-083A-M367 | Front Cross Drilled Brake Rotor (sold per each), Vented, 911 (1970-83), 911 Turbo (1976-77) [More Info] |  |
| $80.25 |  |
911-351-041-22-M367 | Front Cross Drilled Brake Rotor (sold per each), 911 Carrera (1984-89)
Brand: Zimmermann [More Info] | |
| $107.50 | |
901-352-041-14-M367 | Rear Cross Drilled Brake Rotor (sold per each), Vented, 911 (1970-83), 911 Turbo (1976-77) [More Info] | |
| $107.00 | |
911-352-041-08-M367 | Rear Cross Drilled Brake Rotor (sold per each), 911 Carrera (1984-89) [More Info] | |
| $122.00 | |
Brake Rotor Cooling Kit |
| Afraid of having your brakes fade on you when they overheat? Live in the upper mountains or race your 911 and need some extra cooling? Install our brake cooling kits that funnel air directly to the rotors. Our Cooling Kit features lightweight aluminum alloy canisters that prevent cracks that can often occur in cheaper fiberglass housings. The Cooling Kit contains an air scoop, flexible air hose, and an aluminum cooling canister back plate for both front brake rotors. Check out our Pelican Technical Article on the Brake Rotor Cooling Kit Installation |
|
911-BCRK-001 | Front Brake Rotor Cooling Kit, 911 (1974-89), 911 Turbo (1976-77) [More Info] | $365.95 | |
911-BCRK-002 | Front Brake Rotor Cooling Kit, 911 Turbo (1978-89) [More Info] | $375.95 | |
| Brake Air Deflection Plates |
| This neat little device attaches to the hub and rotor, and deflects more cooling air into the rotors instead of the hubs. An excellent addition to the brake cooling kit, these deflection plates can funnel more than 50% of the excess air away from the rotors, and towards the vents inside the rotors. This increased volume of air reduces the brake disc temperatures, and helps to eliminate brake fade and wear. Sold in pairs. |
|
PEL-AD-1000D | Front Brake Air Deflection Plates (pair), 911 (1974-89), 911 Turbo (1976-77) [More Info] | $43.95 | |
PEL-AD-1000E | Front Brake Air Deflection Plates (pair), 911 Turbo (1978-89) [More Info] | $53.95 | |
| N.E.R.P Cooling Kit and Components |
These brake cooling kits funnel air directly to the front rotors. Additionally, each part of the kit is available separately in case you need a replacement or are interested in assembling a custom cooling solution.
The N.E.R.P Cooling Kit features:• Aluminum brake backing plate and associated components have been specifically designed to fit your model. No cutting, drilling, machining.
• Light weight, 5-7 oz. Typical per plate.
• Flow bench Designed for maximum efficiency.
• All high quality components in each kit, from 100% SS hose clamps to 500° F Silicone duct hose.
• Left and Right Backing Plates can be swapped to allow top front hose entry. NOTE: May interfere with stock sway bars |
|
PEL-PBSCBPAZK | 911 Front Brake Cooling Complete Kit, 911 (1976-89) [More Info] | $295.99 | |
PEL-PBSCBPAZL | 911 Backing Plate, Black Anodized (Left), 911 (1976-89), 5.7oz [More Info] | $118.00 | |
PEL-PBSCBPAZR | 911 Backing Plate, Black Anodized (Right), 911 (1976-89), 5.7oz [More Info] | $118.00 | |
PEL-PBSTBPAZL | 911 Backing Plate (Double), Black Anodized (Left), 911 (1976-89), 7.2oz [More Info] | $135.00 | |
| PEL-PBSTBPAZR | 911 Backing Plate (Double), Black Anodized (Right), 911 (1976-89), 7.2oz [More Info] | $135.00 | |
PEL-MNOOFSOZN | Debris Screen, for 2.5-inch Diameter Hose [More Info] | $15.60 | |
PEL-MOOOCHOZN | Silicone Hose 2.5" X 14.5", 500 deg F [More Info] | $11.95 | |
| PEL-MOOOBHOZN | Silicone Hose 2.5" (Bulk Hose, Priced per each 11-feet), 500 deg F [More Info] | $92.85 | |
PEL-MAOOSCOZN | Polyethelene Scoop, for 2.5-inch Hose Diameter [More Info] | $40.00 | |
PEL-MOOOSCPKN | Scoop for 2.5-inch or 3-inch Hose Diameter [More Info] | $16.50 | |
