| Porsche 911 & Carrera Brake Hydraulics - Page 4 |
Master Cylinders |
| Master Cylinder Feed Lines |
| Keep your master cylinder from getting thirsty! These are the lines that connect the reservoir to the master cylinder. Sometimes these get worn or damaged when replacing your master cylinder, which can result in air getting into the master cylinder. Replace them if you think that they might be leaking or damaged. Use new clamps too, if yours are old and corroded. |
|
PCG-355-063-00-OEM | Master Cylinder Feed Line, Rear, 911 (1974-76)
Brand: Genuine Porsche [More Info] | $114.00 |  |
PCG-355-061-00-OEM | Master Cylinder Feed Line, Front, 911 (1974-76)
Brand: Genuine Porsche [More Info] | $114.00 | |
999-181-021-50-M107 | Brake Reservoir to Feed Line Braided Hose, blue, (priced/sold per meter, cut to size)
Brand: Meteor [More Info] |  |
| $11.00 | |
999-512-055-02-OEM | Clamp for Braided Hose (sold per each)
Brand: Genuine Porsche [More Info] | $4.25 | |
| Brake Hose Fitting on Master Cylinder (Angled), 911 (1977-89), 911 Turbo (1977-89), Each |
| 911-355-323-00-M4 | Brake Hose Fitting on Master Cylinder (Angled), 911 (1977-89), 911 Turbo (1977-89), Each
Brand: Ate [More Info] | |
| $1.75 | |
| 911-355-323-00-M100 | Brake Hose Fitting on Master Cylinder (Angled), 911 (1977-89), 911 Turbo (1977-89), Each
Brand: Genuine Porsche [More Info] | |
| $2.00 | |
|
| 911-355-322-00-M136 | Brake Hose Fitting on Master Cylinder (Straight), 911 (1977-89), 911 Turbo (1977-89), Each
Brand: OEM [More Info] | |
| $2.25 | |
| Brake Pressure Regulator |
928-355-305-02-M100 | Brake Pressure Regulator, 911 (1984-89), Each
Brand: Genuine Porsche [More Info] | |
| $111.25 | |
Brake Boosters |
The brake booster is a particularly expensive piece to replace. There is only one manufacturer of these, and they price them in the stratosphere. The good news is that these don't usually need to be replaced. Used on the power brake cars, they accept a vacuum hose from the engine manifold, and use that vacuum pressure to assist in the movement of the master cylinder. Be very careful when reattaching the brake booster to the master cylinder. Using too much torque can damage the delicate booster housing, and render it useless.
Manufacturer: ATE/Girling - OEM Porsche Suppliers |
|
911-355-027-00-OEM | Brake Booster, 911, 911 Turbo (1977)
Brand: Genuine Porsche [More Info] | No Longer Available | |
| 930-355-027-00-M100 | Brake Booster, 911 (1978-89), 911 Turbo (1978-84)
Brand: Genuine Porsche [More Info] | |
| $670.25 | |
930-355-027-02-OEM | Brake Booster, 911 Turbo (1986-89)
Brand: Genuine Porsche [More Info] | $791.25 | |
| 251-611-243-OEM | Brake Booster/Master Cylinder O-Ring, 911 (1977-89)
Brand: Genuine Porsche [More Info] | $4.00 | |
Caliper Rebuild Kits  |
For those up to the task, we offer front and rear caliper rebuilding kits. Be sure to take a close look at our Pelican Technical Article on 911 Caliper Rebuilding for the exact procedure on how to perform the rebuild yourself. One kit required per caliper.
Please note: Porsche does not recommend splitting the calipers for rebuilding. Due to this, the caliper halve seals are not included in these factory caliper rebuild kits. |
|
901-351-964-11-M4 | Front Brake Caliper Rebuild Kit, Steel 'M' Brakes (sold per each) - contains piston seals, boots, retainers and pin clips, 911 (1974-75 early), 1976 (912E)
Brand: Ate [More Info] | |
| $15.00 | |
901-351-998-00-M4 | Front Aluminum Alloy 'S' Brake Caliper Rebuild Kit (sold per each) - contains piston seals, boots, and pin clips, 911/911 Turbo (1974-77)
Brand: Ate [More Info] | |
| $31.75 | |
911-351-946-00-M4 | Front Steel 'A' Brake Caliper Rebuild Kit (sold per each) - contains piston seals, boots, and retainers, 911 (late 1975-89)
Brand: Ate [More Info] | |
| $13.75 | |
| PEL-930BK-FKTN | Brake Caliper Rebuild Kit, Front (for 1 caliper) - contains piston seals and scraper rings, 911 Turbo (1978-89) [More Info] | $102.00 | |
911-352-998-00-M33 | Rear Brake Caliper Rebuild Kit (sold per each) - contains piston seals, boots, retainers and pin clips, 911 (1974-83)
Brand: FTE [More Info] | |
| $12.50 | |
911-352-905-00-M33 | Rear Brake Caliper Rebuild Kit (sold per each) - contains piston seals and boots, 911 Carrera (1984-89)
Brand: FTE [More Info] | |
| $12.00 | |
901-352-998-00-M4 | Rear Brake Caliper Rebuild Kit (sold per each) - contains piston seals and boots, 912E (1976)
Brand: Ate [More Info] | |
| $20.00 | |
| PEL-930BK-RKTN | Brake Caliper Rebuild Kit, Rear (for 1 caliper) - contains piston seals and scraper rings, 911 Turbo (1978-89) [More Info] | $102.00 | |
