| Porsche 911 & Carrera Wheels & Related - Page 2 |
Wheel Studs |
| If you're running wider wheels, make sure that you use the proper length wheel stud. Otherwise, your wheel can fall off (we know first-hand how this can happen!) |
|
| 993-331-671-01-M260 | Wheel Stud, 45mm
Brand: OEM [Photo] |  |
| $8.00 |  |
| PCG-331-671-00-M260 | Wheel Stud, 52mm
Brand: OEM [Photo] | |
| $7.50 | |
| 911-331-671-00-M260 | Wheel Stud, 67mm
Brand: OEM [Photo] | |
| $7.75 | |
| 901-331-671-01-M260 | Wheel Stud, 72mm
Brand: OEM [Photo] | |
| $7.75 | |
| H-331-100MM | Wheel Stud, 100mm | $9.15 | |
| H-331-100MMPK | Wheel Stud, 100mm, 10 Pack | $88.80 | |
Tire Valve Stems & Caps |
| Even the smallest details are important when you're driving a Porsche. Our Original Porsche valve stem caps are intricately detailed with the distinctive Porsche crest on top of the cap. These caps will enhance and add the finishing touch to your wheels. Sold as set of four. |
|
| 000-044-600-00-M100 | Factory Tire Valve Stem Cap/Sleeve, Set of Four
Brand: Genuine Porsche [Photo] [Photo] | |
| $22.00 | |
PNA-705-002-00-OEM | Factory Tire Valve Stem Caps
Brand: Genuine Porsche [Photo] | $15.25 | |
| 900-265-001-50-OEM | Replacement Porsche Tire Valve Stem, Rubber (sold per each)
Brand: Genuine Porsche | $6.25 | |
| Valve Stem Supports |
| High-speed driving puts a tremendous amount of force on your tire valve stems. In extreme situations, the stems might even shear off if your wheels are spinning fast enough. Adding these little valve stem supports provides you with peace of mind when accelerating beyond 100 MPH (on the track, of course). |
|
965-361-561-00-OEM | Porsche Aluminum Valve Stem Support for Fuchs wheel (sold per each, 1 required per wheel, self-adhesive backed)
Brand: Genuine Porsche [Photo] | $6.00 | |
Alloy Wheel Center Caps |
Have your center caps been lost or become faded with age? Replace them with a new set, and give that distinctive Porsche look back to your wheels. Choose from one of many different styles, including factory original replacements and theft-deterrant billet aluminum versions.
Please note that all the caps below attach to the wheels with ring-type clips. Earlier cars used 3-prong clips that fit a slightly smaller diameter hole. |
|
| OEM Factory Original Hubcaps (crest is cast into the hubcap) |
| 901-361-032-00-M260 | OEM Factory Original Hubcap, Silver
Early 911 Fuchs Alloy, 3-prong, each
Brand: OEM [Photo] | |
| $35.25 | |
| 911-361-032-00-M260 | OEM Factory Original Hubcap, Silver
Late 911 Fuchs Alloy, each
Brand: OEM [Photo] [Photo] | |
| $34.00 | |
| 911-361-032-28-M260 | OEM Factory Original Hubcap, Black
Late 911 Fuchs Alloy, each
Brand: OEM [Photo] [Photo] | |
| $35.75 | |
| 10-5015-361-M260 | OEM Hubcap for Phone Dial Type Wheel, Silver with Enameled Crest, each
Brand: OEM [Photo] | |
| $58.50 | |
| 928-361-032-01-M260 | OEM Hubcap for Phone Dial Type Wheel, Silver with Black Crest, each
Brand: OEM [Photo] | |
| $28.75 | |
Locking Billet Aluminum Hubcaps with Inlaid Crests
(Gold Crest mounted flush onto cap) |
| Factory original center caps are nice, but the fit and finish of these billet aluminum caps raise the bar on quality! Utilizing genuine Porsche crests inlaid into the surfaces, these caps sparkle like precious gold on your wheels. To prevent theft, they are secured on the backside using three screws. Available in several finishes to match your original Porsche wheels. |
|
RB-911-HC-70C | Theft-Proof Locking Billet Aluminum Center Cap for Porsche Fuchs Wheel, Chrome, Inlaid Crest, replaces cap w/ ring clip (70mm hole), each [Photo] | $90.00 | |
RB-911-HC-70B | Theft-Proof Locking Billet Aluminum Center Cap for Porsche Fuchs Wheel, Black, Inlaid Crest, replaces cap w/ ring clip (70mm hole), each [Photo] | $90.00 | |
RB-911-HC-70P | Theft-Proof Locking Billet Aluminum Center Cap for Porsche Fuchs Wheel, Polished, Inlaid Crest, replaces cap w/ ring clip (70mm hole), each [Photo] | $90.00 | |
