| Porsche 911 Targa & Cabriolet Parts - Page 1 |
Targa Tops |
| Targa Top Assembly |
| For those who are faint of heart and have a top that is beyond recognition, we offer the complete Targa Top Assembly, ready to snap on! |
|
| 911-565-002-40-OEM | Targa Top Assembly, 911 (1974-85) Brand: Genuine Porsche | $11455.25 |  |
| 964-565-002-01-707-OEM | Targa Top Assembly, 911 (1986-89) Brand: Genuine Porsche | $20008.00 |  |
| Targa Top Fiberglass Shell |
This fiberglass hard top attaches to your existing Targa frame and utilizes the stock latches and seals. The black gel-coat finish is ready for paint or covering with an OEM type vinyl. The inside is ready for a glue-in headliner – no sewing required. The top is fabricated with hand-laid fiberglass in a mold fabricated from an original factory hard top. The installation is easy and takes advantage of existing screw holes in the frame and is rigidly attached when properly installed.
Why spend money on a new soft top that needs to be replaced again and again? No more sags and wrinkles – the perfect curve of the hard top will always reflect the original contour the Porsche designers intended.
Download installation instructions here (requires Adobe Acrobat Reader). |
|
 JM-PRO-T1 | Targa Hard Top Shell (Fiberglass) - replaces soft Top, requires original frame. Fits 911 1974-89. [Photo] | $512.45 |  |
Latches & Recovering |
Have you ever been driving around and had the targa top come flying off? Probably not, but good latches are key to avoiding this potential disaster (we actually know someone who had this happen to them).
For a detailed view of the Targa recovering material, visit this link:
Targa Top Vinyl - Domestic |
|
| WU-911-3008-1 | Targa Roof Skin, Vinyl Recovering Kit (German Vinyl), 911 Targa (1967-94) | $162.60 |  |
| 911-565-075-41-M100 | Targa/Cabriolet Top Release Handle, 'Updated Version' (sold per each, 2 req.), 911 (1974-85) Brand: Genuine Porsche [Photo] [Photo] |  |
| $47.50 |  |
 911-565-075-62-70B-OEM | Targa / Cabriolet Top Handle, Black (sold per each, 2 req.), 911 (1986-89) [Photo] | $75.25 |  |
 964-565-265-00-OEM | Targa Top Clip "Updated Version" (sold per each, 8 req) 911 (1974-89) Brand: Genuine Porsche [Photo] [Photo] | $35.75 |  |
 999-219-006-02-OEM | Targa Top Clip Screw, M4x8, each (2 screws req per clip - 8 clips total), 911 (1974-89) Brand: Genuine Porsche [Photo] | $2.50 |  |
 900-115-008-02-OEM | Serrated Locking Washer (sold per each, 16 required), 911 (1974-89) Brand: Genuine Porsche [Photo] | No Longer Available | |
 911-565-217-40-OEM | Targa Roof Pin Cover, 911 (1974-85) Brand: Genuine Porsche [Photo] | $7.25 |  |
Headliner & Trim |
| Targa owners don't have the usual hassles associated with the replacement of the headliner. Instead, the inside of the Targa roof contains a felt liner, and a padding kit. The Targa roll bar also has an inner vinyl liner that runs up the insides of the car, and across the bar. Underneath the vinyl covering is a padding that insulates the car from wind noise, and also two vents on either side. |
|
| PEL-911-HL-03 | Targa Top Roof Headliner, 911 (1974-89) | $74.70 |  |
 PEL-TRGPAD-1 | Targa Top Roof Padding Kit, includes burlap, foam & Stayfast fasteners, 911 (1974-89) [Photo] | $28.95 |  |
| 911-565-513-40-OEM | Targa Bar Padding Foam (under vinyl), left, 911 (1974-89) Brand: Genuine Porsche | $59.25 |  |
| 911-565-514-40-OEM | Targa Bar Padding Foam (under vinyl), right, 911 (1974-89) Brand: Genuine Porsche | $59.25 |  |
 901-565-511-40-OEM | Targa Bar Vinyl, 911 (1974-89) Brand: Genuine Porsche [Photo] | $140.25 |  |
 911-565-157-40-OEM | Targa Bar Vent, left, 911 (1974-89) Brand: Genuine Porsche [Photo] | No Longer Available | |
 911-565-158-40-OEM | Targa Bar Vent, right, 911 (1974-89) Brand: Genuine Porsche [Photo] | $82.50 |  |