| Porsche 911 Chassis Panels & Sheet Metal - Page 3 |
Sheet Metal |
| Chassis and Replacement Sheetmetal |
Most restorations require some type of panel replacement. These steel panels are made here in the USA on 500 Ton presses and precision laser cut. Why settle for used or questionable parts? All the factory mounting points and holes are there for a trouble-free and perfect fit every time. The only difference between these panels and the factory ones is the price. As with all body panels, final fitting and finishing may be required. Professional installation is recommended.
NOTE: All of the reproduction sheet metal that we currently list is temporarily unavailable until further notice. This has been caused by some hindrances on production on our supplier's end. We are currently working hard to re-list these products incrementally within the next several weeks. Pelican Parts appreciates your patronage, and we apologize for any inconvenience this may cause you. |
|
PEL-RDP232 | Front Latch Support Panel, 911 (1974-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP233 | Front Lip, 911 (1974-89) [Photo] | Temporarily Unavailable | |
PEL-TMP-9480 | Front Suspension Pan with Tow Hook, 911 (1974-89) [Photo] [Photo] | $174.95 |  |
PEL-RDP201 | Tow Hook Assembly, 911 (1974-89) [Photo] | Temporarily Unavailable | |
PEL-RDP204 | Gas Tank Support, 911 (1965-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP220AL | Gas Tank Lateral Support (Left), 911 (1974-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP220R | Gas Tank Lateral Support (Right), 911 (1974-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP212AL | Outer Chassis Rocker Panel (Left), 911 (1974-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP212AR | Outer Chassis Rocker Panel (Right), 911 (1974-89) [Photo] | Temporarily Unavailable | |
PEL-RDP213L | Inner Chassis Rocker Panel (Left), 911 (1965-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP213R | Inner Chassis Rocker Panel (Right), 911 (1965-89) [Photo] | Temporarily Unavailable | |
PEL-RDP214 | Jack Receiver Plate, 911 (1965-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP216 | Jack Receiver Tube, 911 (1974-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP280L | Longitudinal/Wheelhouse Repair Panel (Left) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP280R | Longitudinal/Wheelhouse Repair Panel (Right) [Photo] | Temporarily Unavailable | |
PEL-RDP218A | Front Floor Pedal Area Section [Photo] | No Longer Available | |
PEL-RDP218 | Front Half Floor Pan [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP219 | Rear Half Floor Pan [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP260L | Rocker Panel Support (Left), 911 (1965-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDP260R | Rocker Panel Support (Right), 911 (1965-89) [Photo] | Temporarily Unavailable | |
PEL-RDP285 | Rear Crossmember Latch Panel, 911 (1965-83) [Photo] [Photo] | Temporarily Unavailable | |
| Suspension Pan and Rocker Panel Repair Kits |
| We have these kits available not only for your convenience, but for a great price! The Pkg D Kit consists of a front pan assembly with tow hook and a fuel tank support. The Pkg ELR consists of an outer rocker panel, inner rocker panel, a jack receiver plate and a jack receiver tube. NOTE: On these rocker kits, please specify either left or right side. |
|
| 911-501-955-00-GRV-M350 | Floor Pan, Front (Suspension Support), 911 (1965-89)
Brand: Dansk |  |
| $564.25 | |
PEL-RDPPKGD | Front Suspension Pan and Gas Tank Support Kit, 911 (1974-89) [Photo] [Photo] | Temporarily Unavailable | |
| 901-504-932-20-M260 | Fuel Tank Base Seal (not included in the above kit), 911/911 Turbo (1974-89)
Brand: OEM [Photo] [Photo] | |
| $27.25 | |
PEL-RDPPKGEL | Inner/Outer Rocker Panel, Jack Receiver Plate/Tube Kit (Left), 911 (1965-89) [Photo] [Photo] | Temporarily Unavailable | |
PEL-RDPPKGER | Inner/Outer Rocker Panel, Jack Receiver Plate/Tube Kit (Right), 911 (1965-89) [Photo] [Photo] | Temporarily Unavailable | |
