| Porsche 911 & Carrera Ignition Tune-Up - Page 3 |
Ignition Wire Sets |
| Clewett Engineering High Performance Ignition Wires |
| Clewett Engineering High Performance Ignition Wires are 8mm, with a 2 layer silicone jacket, wrapped in a 1200 degree protective sleeve. This Spiral Core, resistor conductor wire provides EMI/RFI suppression for all ignition and engine management systems. The connector ends are even numbered to reduce confusion! These wires are a great choice for either racing or street applications. Available in either Red or Black. Coil Wire included (Dielectric Grease not included). Wire separators sold separately. |
|
CE-9192-28-B | Clewett Engineering High Performance Ignition Wires - BLACK, 911 (1970-83), 911 Turbo (1984-89) | $127.30 |  |
CE-9192-28-R | Clewett Engineering High Performance Ignition Wires - RED, 911 (1970-83), 911 Turbo (1984-89) [Photo] [Photo] | $127.30 | |
CE-9192-20-B | Clewett Engineering High Performance Ignition Wires - BLACK, 911 3.2 Carrera (1984-89) | $138.25 | |
CE-9192-20-R | Clewett Engineering High Performance Ignition Wires - RED, 911 3.2 Carrera (1984-89) [Photo] [Photo] | $137.65 | |
CE-9191-18 | Spark Plug Wire Separator - 8.5mm - EACH [Photo] | $1.35 | |
| Fyrebraid Ignition Wires |
| Manufactured just like the Heavy Duty wire sets, only these wires offer the "Fyrebraid" Hi Temperature covering that can withstand up to 1400 degrees Fahrenheit |
|
PEL-PP903519 | Fyrebraid Ignition Wire Set, 912 (1965-69) [Photo] | $45.95 | |
PEL-PP903539 | Fyrebraid Ignition Wire Set, 912E (1976) [Photo] | $51.40 | |
PEL-PP903541 | Fyrebraid Ignition Wire Set, 911 (1965-83) [Photo] | $182.40 | |
PEL-PP901319 | Fyrebraid Ignition Wire Set, 911 Carrera (1984) [Photo] | $232.75 | |
PEL-PP901321 | Fyrebraid Ignition Wire Set, 911 Carrera (1985-89) [Photo] | $255.65 | |
PEL-PP903541 | Fyrebraid Ignition Wire Set, 911 Turbo (1976-89) [Photo] | $182.40 | |
| Competizione Heavy Duty Ignition Wires |
| We call them Heavy Duty because they feature a tough outer silicone jacket that can withstand up to 600 degrees Fahrenheit. Manufactured similar to the standard wire sets, but with just a little more added protection for that extra edge. |
|
PEL-PP903538 | Heavy Duty Ignition Wires, 912E (1976) [Photo] | $39.00 | |
PEL-PP903540 | Heavy Duty Ignition Wires, 911 (1965-73) [Photo] | $157.99 | |
PEL-PP901318 | Heavy Duty Ignition Wires, with Stainless Outer Braiding, 911 (1974-83) [Photo] | $297.95 | |
PEL-PP903556 | Heavy Duty Ignition Wires, 911 Carrera (1984) [Photo] | $195.35 | |
PEL-PP901320 | Heavy Duty Ignition Wires, 911 Carrera (1985-89) [Photo] | $199.95 | |
PEL-PP901317 | Heavy Duty Ignition Wires, 911 C2/C4 (1989-94) [Photo] | $519.99 | |
PEL-PP901318 | Heavy Duty Ignition Wires, with Stainless Outer Braiding, 911 Turbo (1976-89) [Photo] | $297.95 | |
PEL-PP901322 | Heavy Duty Ignition Wires, 911 Turbo 3.3l (1991-92) [Photo] | $250.75 | |
PEL-PP901323 | Heavy Duty Ignition Wires, 911 Turbo 3.6l (1993-1994) [Photo] | $348.70 | |
