| Porsche 911 & Carrera Filters & Belts - Page 3 |
Fuel Filters |
Keep your injection system clean by changing your fuel filter every 6000 miles.
IMPORTANT: Please verify Bosch part # on your current filter prior to ordering.
NOTE: Always use properly sized flare nut wrenches on all fuel line fittings. If you do not yet own a quality set, then please browse our selection of SK Flare Nut Wrenches. |
|
| 0-450-905-062 | Fuel Filter (Bosch 0 450 905 021), 912E (1976) (NOTE: need to remove the steel fittings on either end of the original filter and install them on the new one)
Brand: Bosch [More Info] | $11.00 |  |
| 911-356-901-00-OEM | Fuel Filter Update Kit, 911 (1974)
Brand: Genuine Porsche [More Info] | No Longer Available | |
| 911-110-176-00-M14 | Fuel Filter (Bosch 0 450 905 003), 911 (1974-76)
Brand: Bosch [More Info] |  |
| $13.00 | |
| 911-110-176-02-M14 | Fuel Filter (Bosch 0 450 905 016), 911 (1974 with updated filter), 911 (1977)
Brand: Bosch [More Info] | |
| $14.50 | |
| 930-110-076-00-M14 | Fuel Filter (Bosch 0 450 905 021) 911 (1978-80)
Brand: Bosch [More Info] | |
| $26.25 | |
| 928-110-147-05-M67 | Fuel Filter (Mahle) 911 (1981-83)
Brand: Mahle Filter [More Info] | |
| $16.25 | |
| 928-110-147-05-M45 | Fuel Filter (Hengst) 911 (1981-83)
Brand: Hengst [More Info] | |
| $14.50 | |
| 928-110-253-06-M67 | Fuel Filter KL-21, 911 (1984-89), 911 Carrera 2/4 (1984-98)
Brand: Mahle Filter [More Info] | |
| $18.50 | |
| 930-110-139-00-M14 | Fuel Filter (Bosch 0 450 905 281), 911 Turbo (1976-79)
Brand: Bosch [More Info] | |
| $30.75 | |
| 928-110-147-05-M67 | Fuel Filter (Mahle) 911 Turbo (1981-89)
Brand: Mahle Filter [More Info] | |
| $16.25 | |
Valve Cover Gasket Kits |
| These gaskets should be replaced every time that you adjust your valves. The gasket kits come complete with valve cover gaskets and enough nylock nuts and crush washers for all 4 valve covers. Buy an extra pair or two to have on hand for next time you adjust your valves! |
|
| 10-0906-091-M260 | Valve Cover Gasket Kit (includes Cover Nuts & Washers), 911/911 Turbo (1968-89)
Brand: OEM [More Info] | |
| $25.50 | |
| 10-0906-092-M260 | Valve Cover Gasket Kit with Silicone Bead on lower Gasket 911/911 Turbo (1968-89)
Brand: OEM [More Info] | |
| $34.50 | |
| 930-105-194-04-M17 | Upper Valve Cover Gasket, 911/911 Turbo (1974-89)
Brand: Victor Reinz [More Info] | |
| $5.00 | |
| Lower Valve Cover Gasket, 911/911 Turbo (1974-89) |
| 930-105-195-07-M127 | Lower Valve Cover Gasket, 911/911 Turbo (1974-89)
Brand: German [More Info] | |
| $6.75 | |
| 930-105-195-07-M260 | Lower Valve Cover Gasket, 911/911 Turbo (1974-89)
Brand: OEM [More Info] | |
| $6.50 | |
|
| Silicone Valve Cover Gaskets |
Silicone Valve Cover gaskets for your Porsche! They are a tad thicker than ones you replace every time you adjust your valves and can get rid of those troublesome leaks. These can be reused again and again; just rinse them off and put them back on.
We do recommend you replace the Nylock nuts each time you remove the valve covers, but that applies to any valve cover gasket. |
|
PEL-SIL-VLGK | Silicone Valve Cover Gasket set, 4 per set, hardware not included - 911 (1968-89), 911 Turbo (1976-92) [More Info] | $38.70 | |
| 900-084-004-03-M58 | Nylock Nut (M8, 34 required), 911 (1965-89), 911 Turbo (1976-92), each
Brand: OEM [More Info] | |
| $0.50 | |
| 900-031-014-30-M131 | Washer 8.4mm (34 required), 911 (1965-89), 911 Turbo (1976-92), each
Brand: Fischer & Plath [More Info] | |
| $0.25 | |
| 900-123-118-30-M131 | Oil Drain Plug Seal (22 X 27mm), Sealing Ring for Plug at Bottom of Engine Sump Plate or Oil Tank, 911/911 Turbo (1965-89), Air Box Sealing Ring, 911 (1974-83), each
Brand: Fischer & Plath [More Info] | |
| $0.25 | |
