| Porsche 911 Tools - Page 2 |
AC Hydraulic Jacks |
Super high-lift, simple and safe to operate. Just depress the lever with your foot and the jack pad raises up to contact the jacking point on your vehicle. DK13HLQ is constructed with a flat inner steel frame so the front 16 inches of the jack has a height of less than 3.5 inches and a maximum lifting height of 29 inches! Just the perfect height for stock or lowered vehicles! Ergonomically designed handle ensuring a firm and comfortable grip whatever the conditions. Dead-mans control on raising and lowering the jack arm.
Click here to download the User Manual |
|
TOL-13HLQ | DK13HLQ 2800lb High-Lift Floor Jack with QuickLift Pedal [More Info] | $549.00 |  |
The DK20Q offers all the benefits of the DK20 plus the convenience of the quicklift pedal. Simple and safe to operate. Just depress the lever with your foot and the jack pad raises up to contact the jacking point on your vehicle.
Click here to download the User Manual |
|
TOL-DK20Q | DK20Q 4400lb Floor Jack with QuickLift Pedal [More Info] | $539.00 | |
Ultra-low minimum height of only 3.15 inches, just the perfect height for stock or lowered vehicles! Maximum jack height of 19.7 inches! Ergonomically designed handle ensuring a firm and comfortable grip whatever the conditions. Dead-mans control on raising and lowering the jack arm. Built-in safety valve to ensure against overloading and a wide, rugged steel frame for stability and long service life.
Click here to download the User Manual |
|
TOL-DK20 | DK20 4400lb Floor Jack [More Info] | $399.00 | |
| Don't forget the GS1 Jack Saddle Cushion to protect your vehicle's underbody from damage. |
|
TOL-3601400 | Jack Saddle Cushion (GS1) for AC Hydraulic Jack, each [More Info] | $23.95 | |
Engine Jacking Block |
| Many of us feel reluctant to use the bottom of the engine as a jacking point on the 993. This jacking block will put your mind at ease. Note that use of this product requires that you not use the sound tray. |
|
PEL-993-JCKBLCK | Engine Jacking Block, 993 Carrera/Carrera 4 (1996-98) NOTE: Does NOT fit 1995 or Turbo models [More Info] | $250.00 | |
Lug Nut Soft Socket |
Every Porsche owner needs a Soft Socket in their tool box! This high quality, chrome plated lug nut socket was designed with inlaid aluminum to prevent rounded corners or scratches on your lug nuts. Cannot be used with air tools.
NOTE: Not for use with steel lug bolts/nuts, ONLY for original aluminum lug nuts! Also not to be used to break stuck lug nuts free from the wheels! |
|
PEL-SS-19 | Lug Nut Soft Socket, 1/2" drive, Not For Use With Steel Lug Bolts/Nuts, For Aluminum Lug Nuts Only [More Info] | $26.95 | |
| This special thin walled, heavy duty IMPACT socket with a riveted Aluminum insert was developed for the crucial task of R&R of wheel lugs nuts/bolts without marring or scuffing the surface of the wheel or bolts. Measuring at 3.5" to fit into deep recess of wide wheels. Comes with a limited life-time warranty, guaranteed to be the last 19mm wheel lug socket you'll ever buy. |
|
PEL-TOL-LUG19MM | Impact Duty Soft-Walled Lug Nut Socket - 19mm, 1/2" drive 28mm Outer Diameter [More Info] | $29.40 | |
These Chrome Molybdenum thin walled sockets have a plastic outer sleeve to prevent wheel damage during removal and installation of wheel fasteners. Each socket also has a durable plastic inset to help protect the nut head (note that the plastic insert does not protect the sides of the nut). This set includes color coded 17mm, 19mm, and 21mm protective sockets in a custom blow molded case. These sockets are 1/2" drive will help keep your wheels looking new.
NOTE: These are IMPACT-duty sockets for use with either impact or hand drivers. |
|
SCHW-PPS-1721 | Protecta Socket Set (17mm, 19mm, 21mm), 1/2 inch drive [More Info] | $19.00 | |
Lug Nut Torque Socket Set |
Take the guess work out of tightening your wheels, these Schwaben torque sockets will stop tightening when the appropiate torque has been reached. This handy color coded set includes 17mm, 19mm, and 21mm sockets in a compact blow molded case. Sockets are 1/2" drive and are preset for 100Nm (74ft-lbs)
NOTE: These are for use with hand drivers only - they are NOT suitable for impact guns. |
|
SCHW-PTS-12-1721 | Torque Socket Set (17mm, 19mm, 21mm), 1/2 inch drive [More Info] | $51.95 | |
Porsche Engine Rebuild Stand  |
| Planning on rebuilding your engine? You shouldn't even think of it without the proper engine stand. There are cheap, generic engine stands available that will fit your engine with a bit of modifications, but in order to have a firm support of the entire weight of the motor, you should use one specifically designed for the case itself. This fixture is made of heavy-duty steel, and has five arms that can support the full weight of even a complete 930 motor with fuel injection and exhaust! This engine holding fixture can be used with the yokes on most regular engine stands, or you can use the Heavy Duty Clamp which will allow you to bolt the stand to a sturdy (very, very sturdy) table top. The diameter of the shaft is 60mm. This engine holding fixture will fit any model 911/964/993, 912, 356, 930, 914 and any air-cooled VW engine. Also fits 996/997 Turbo Engines including GT2 & GT3. |
|
PEL-TOL-P201 | Engine Holding Fixture P201 (made in Europe) [More Info] | $199.00 | |
PEL-TOL-SIR313 | Heavy Duty Engine Fixture Clamp [More Info] | $148.50 | |
PEL-TOL-SIR215 | Flywheel Lock - This flywheel lock only works with the P201 engine yoke. [More Info] | $25.20 | |
