| Porsche 911 Panels & Doors - Page 2 |
Air Temperature Mixing Flap Motor |
| 964-624-324-00-OEM | Motor for Air Temperature Mixing Flap (2 per car, sold individually), 964 Carrera 2/4 (1989-94), 964 Turbo (1991-94) Brand: Genuine Porsche [More Info] | No Longer Available | |
| 993-624-325-00-M100 | Motor for Air Temperature In-Line Mixing Flap in Kick Panels (2 per car, sold individually), 993 Carrera/4/Turbo (1995-98) Brand: Genuine Porsche [More Info] |  |
| $268.50 |  |
Door Lock Mechanism |
| 964-613-134-00-M100 | Door Lock Micro Switch (with Cable), 964 Carrera 2/4/Turbo (1989-94), 993 Carrera/4/Turbo (1995-98), Each Brand: Genuine Porsche [More Info] |  |
| $97.50 |  |
| 964-537-571-00-M100 | Central Locking System Door Operating Rod (Left or Right (2 per car, sold individually) sold individually), 964 C2/C4 (1989-94), 993 Carrera (1995-98), 911 Turbo (1984-97) Brand: Genuine Porsche [More Info] |  |
| $6.00 |  |
Door Mounting Hardware |
 901-531-305-20-OEM | Pin for Door Hinge (2 per door, sold individually), 911 (1965-98) Brand: Genuine Porsche [More Info] | $13.75 |  |
Weltmeister Window Regulator Pivots  |
| Window not going up anymore? Crank spring quit working? We've got the solution. Replace the original soft pivot with our steel pivot spring retainers. They're engineered to give you years of trouble free use. Inspect your old pivot to determine if the slot is parallel (pivot on left in image) or perpendicular (pivot on right) to the tab end. |
|
 PEL-910391 | Window Regulator Pivot, Slotted End Parallel to Opposite End (23 mm Long), 911 (1965-98) [More Info] | $31.95 |  |
 PEL-910392 | Window Regulator Pivot, Slotted End Perpendicular to Opposite End (23 mm Long), 911 (1965-98) [More Info] | $31.95 |  |
 PEL-910393 | Window Regulator Pivot, Slotted End Parallel to Opposite End (26 mm Long), 911 (1965-98) [More Info] | $31.95 |  |
 PEL-910394 | Window Regulator Pivot, Slotted End Perpendicular to Opposite End (26 mm Long), 911 (1965-98) [More Info] | $31.95 |  |
Disassembly Tools |
| Need to remove trim or a door panel? Don't be left doing that with a screwdriver that could damage expensive trim panels
A complete 5-piece auto trim and molding tool set. This tool set is absolutely perfect for removing moldings, badges, door panels. It works well on anything that is clipped or glued on. Made of a rugged poly/nylon construction to prevent marring. Comes with the following tools: Wide Edge Remover, Narrow Edge Remover, Pull-Type Remover, Handle Remover, and Upholster tool. |
|
 SCHW-PHR-05S | 5-Piece Trim/Molding Tool Set [More Info] | $15.95 |  |
| This special 5 pc. double ended tool kit (excluding one) was designed to aid the technician in disassembly of door panels, fascia / trim strips of dashboards, window installation, etc. Made from impact resistant nylon plastic, it won't scratch or mar parts like similar metal versions. |
|
 PEL-TOL-ST9007 | 5-Piece Panel Removal Set [More Info] | $18.00 |  |
Door Stays (Door Stop) |
Is your door swinging open widely? Did you accidentally bang that Mercedes parked next to you while the driver was sitting in his car? You probably need a new door stay. These often wear out after many years of service. Replacement is easy, and while you're at it, install the door stop reinforcement kit. This plate reinforces the metal on the door to prevent fatigue and tearing of the door panel--a worthwhile upgrade if you're planning on keeping your car for many years. Made from heavy gauge steel and Cad-Plated for corrosion resistance, installs with simple hand-tools. No cutting or welding required.
NOTE: Reinforcement Kit does NOT come with a door stay. Professional installation recommended. |
|
| 901-531-035-20-M100 | Door Stay, Left or Right, 1.5 in. Bolt Spacing (2 per car, sold individually) 911/912 (1965-69), Each Brand: Genuine Porsche [More Info] |  |
| $77.75 |  |
| 911-531-957-00-M260 | Door Stay, Left or Right, 1 3/4 in. Bolt Spacing (2 per car, sold individually) 911 (1970-98), Each (NOTE: Some 1970-71 cars have 1.5" spacing and these won't fit -- please measure before ordering) Brand: OEM [More Info] |  |
| $31.50 |  |
 PEL-PP911167 | Door Stay Reinforcement Kit (requires 911-531-957-00-M260 1 3/4 in. bolt spacing door stay) 911 (1965-94), Each [More Info] | $29.95 |  |
| Door Hinge Parts |
 901-531-311-20-OEM | Door Hinge Bushing (8 per car, sold individually), 911 (1965-89) Brand: Genuine Porsche [More Info] | $5.50 |  |