| Porsche 911 Interior Accessories - Page 1 |
| In this section you will find all of the various interior trim parts Pelican offers for the 964 and 993 911 Models. Keep in mind that this section only contains about 25% of all the items that we can obtain. If you are looking for a specific interior trim piece feel free to contact us directly. |
|
Porsche 930S Steering Wheel |
| One of the coolest upgrades that you can perform on your car is to install the Porsche 930S style steering wheel. The wheel updates the look of your car to the late style 930. This wheel features hand stitching, genuine black leather, and 14-inch diameter. Hub adapter, for all non-air bag Porsche years and models, must be purchased separately. The hub and Cloisonne' crest on horn pad must be purchased and installed separately. Also check out our Pelican Technical Article on Interior Restoration and Carpet Installation. Check out this detailed, step-by-step technical article on performing this upgrade. This wheel is the real thing from the OEM manufacturer - not a replica. |
|
100-498-F60-1 | 930S Style Steering Wheel (hub and crest sold separately, see below), "Formel" Black 360 mm [More Info] | $369.00 |  |
100-498-172-9X1 | Hub Kit, for 930S Style Formel Steering Wheel, 964, 993 [More Info] | $135.00 | |
644-559-210-00-OEM | Porsche Crest with Gold Finish for 930S Style Steering Wheel
Brand: Genuine Porsche [More Info] | $61.50 | |
PEL-SPEC-SPR | 930S Style Steering Wheel Spacer [More Info] | $53.00 | |
Porsche Mini Crest |
| Nothing says class like the Genuine Porsche Crest. This small crest was originally used on the 356 hood badge. It also makes a handy adornment to other areas of your car. Place it in the center of your aftermarket wheel, or use it to cover up an unsightly hole in your dash. These also can be used to dress up your wheel center caps. The size is perfect - a little more than an inch wide, and about an inch and a half tall. The crest comes complete with a mounting stud on the rear - don't forget to order the special speed nut to mount it if you are going to use the stud. This is a Genuine Porsche crest, not an aftermarket copy. |
|
644-559-210-00-OEM | Porsche Mini Crest
Brand: Genuine Porsche [More Info] | $61.50 | |
| 999-591-423-03-M260 | Speednut for Mounting Mini Crest (one required)
Brand: OEM [More Info] |  |
| $1.50 | |
Center Console Parts |
964-552-159-00-1DB-OEM | Cup for Center Console (Black), NOTE: Also use insert #993-552-091-00 to cover screw holes in cup, 964 Carrera 2/4 (1989-94), 993 Carrera (1995-98)
Brand: Genuine Porsche [More Info] | $27.75 | |
993-552-091-00-OEM | Console Insert, NOTE: Use to cover screw holes in cup #964-552-159-00-1DB, 964 Carrera 2/4 (1989-94), 993 Carrera (1995-98)
Brand: Genuine Porsche [More Info] | $9.75 | |
964-552-157-00-1DB-OEM | Storage Bin Insert in Center Console, 911 Turbo (1991-94), 911 all (1995-98) [More Info] | $37.00 | |
Cup Holder |
| Here is a very elegant solution if you are looking to add a cup holder to your 964 or 993. You are probably no longer using that cassette box in the center console. Why not replace it with a cup holder? This black leather-trimmed cup holder is easy to fit and can be used for more than just drinks -- put your sunglasses or cell phone in one of the holes. |
|
PEL-CH964 | Cup Holder for Center Console, Black Leather, 964 and 993 [More Info] | $89.00 | |
| This clever cup holder holds your favorite standard-size beverage (the opening is about 3-1/8" in diameter) without requiring ANY alterations or modifications to your interior. You simply slide it onto your seat rail and tighten the thumbscrew. The thumbscrew even has a rubber bumper at the tip to protect the rail! |
|
PEL-EVOSC91144 | Evo SuperCup Cup Holder, 911 (1965-98), 930, and 944 [More Info] | $49.99 | |
Finally, the cup-holder Porsche owners have always needed. Cups, cans and water bottles at your fingertips. Far enough over to avoid interference when shifting, yet at your fingertips when needed. The ingenuous design locks into your cigarette lighter port with an expanding plug and stays there until you remove it with a quick turn of the thumbscrew. All steel construction with an insulated end and black powder-coated for a tough, long-lasting finish. Are you tired of cup-holders that wont stick where you put them; drinks leaking into your door pockets because you forgot they were there when you closed the door? Tested with over 2 lbs. of ballast for over 2 months to ensure a strong and secure holder.
A cup-holder mounted closest to the center of the car is less likely to spill and the most convenient location for the driver. |
|
PEL-JM-CUP | Cup Holder, 911 up to 1997, Aftermarket [More Info] | $37.75 | |
AllView Rear View Mirror  |
The Smart-Clip Mirror snaps onto a vehicle's factory installed rear view mirror. This extra-wide mirror helps to eliminate blind spots and makes lane changes and back up maneuvers much safer. The mirror is vibration-free and shatterproof. Perfect for drivers of all ages and skill levels.
Dimensions: 15-1/2" x 2-3/8" |
|
PEL-ALLVIEW-1500 | Smart-Clip ALLVIEW Mirror Model 1500 [More Info] | $59.95 | |
