Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

 
- Back to Catalog -
BHP Performance Brake Pad Sets
Titanium Brake Cooling Shields
Pagid Racing Brake Pad Sets
High Performance Brake Rotors
Cross-Drilled Rotors
Slotted Rotors
Stainless Steel Braided Brake Line Kits
Big Red Brake Kits
Brembo Gran Turismo Brake Kits
- Back to Catalog -
Home >  911 Catalog911 (1989-98)Brakes >   Porsche 911 Brake Performance Upgrades 
Porsche 911 Brake Performance Upgrades - Page 1

BHP Performance Brake Pad Sets

Introducing the XPS line of brake pads from BHP – a true dual-use performance pad applicable for either street or track usage. The practicality of these pads is due to the advanced XPS composite that provides for a high initial bite and maintains a near linear torque curve. Cold and elevated operating temperature performance is only within a 5% range, giving a predictable pedal feel and consistent stopping distances. See the test results for yourself!

The proprietary XPS formulation is a high friction composite with relatively low metallic content. This results in a lower thermal conductivity, which in turn, minimizes overheating of the brake fluid. The XPS formulation is also less destructive to brake discs in severe use, and is more tolerant to cross-drilling of discs than semi-metallic pads.

Brake noise is minimized with an anti-noise shim made from an advanced composite. These composite shims have proven to be the most effective shims available in dampening high frequency vibrations associated with brake squeal. The pads are finished with a Dupont silicone powder-coat that accommodates temperatures of up to 800 °F without degradation. Not only does this preserve its finished appearance, but also prevents corrosion of the backing plates throughout the whole life of the pad.

NOTE: It is recommended that these pads should be used with either freshly turned or brand new brake rotors to minimize the possibility of brake noise.

BHP-S0877

BHP Performance Brake Pad Set
FRONT - 911 C2/C4 (1989-94)
REAR - 911 C4/RS (1989-94), 911/993 (1994-98), 911 Turbo (1978-94)
    [Photo] [Photo]

$159.85

BHP-S0953

BHP Performance Brake Pad Set
FRONT - 911/993 (1994-98), 911 Turbo (1991-92)    [Photo]

$168.05

BHP-S1402

BHP Performance Brake Pad Set
FRONT - 911 C4S/Turbo/RSR (1993-98)    [Photo]

$210.05

BHP-S1163

BHP Performance Brake Pad Set
REAR - 911 C2 (1990-91)    [Photo]

$169.05

Titanium Brake Cooling Shields   Camera Pic

Repetitive stops from high speed can overheat normal brake components and cause brake fade. Brake fade from boiling brake fluid can result in a complete loss of brakes. If your high performance car suffers from a "soft" brake pedal from repeated use you are in danger of having a potentially catastrophic accident.

Titanium has a low heat conductivity rating; about 1/3 that of stainless steel, 1/7 that of regular steel.

Ti Brake Shields are aerospace-quality titanium alloy plates. The shields help retard heat transfer from the hot brakes to the brake fluid. Each shield installs easily between the brake pad and caliper piston. Sold per pair of wheels.


PEL-SS-TBS2

Titanium Brake Shield Set (4 included), Front and Rear C2/C4/RSA (1989-94), Rear 911 Turbo (1991-95), Rear 993, fits cars with brake pad width of 78mm

$89.95

Pagid Racing Brake Pad Sets

The Pagid Orange RS 4-4 compound has a very good fade resistance and a higher average friction value than the RS 4-2 (Blue). It is rotor friendly with predictable, non-aggressive friction behavior (stable torque). Fading resistance up to 560°C (1.050°F). It is a very good rear compound for Touring Car applications in combination with RS 14 front pads. Its main application is Porsche 911 racing. It is used on either Short Track or Long Distance; also for front and rear axles. It is also used on BMW Showroom Stock, all other Touring-Cars and Single-Seater up to F3.

99-5541-531-M473

Pagid Orange Front Brake Pad Set, (98mm), Without Brake Pad Sensor, 911 Carrera 2/4 (1989-94)    [Photo]

$260.75

99-5541-532-M473

Pagid Orange Front Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Carrera 2/4 (1995-98), 911 Turbo (1991-92)     [Photo]

$274.75

99-5541-534-M473

Pagid Orange Front Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Turbo (1995-98)     [Photo]

$320.25
PEL-900249

Pagid Orange Rear Brake Pad Set, (64mm), With Brake Pad Sensor, 911 Carrera 2 (1990-91)

Out of Stock 

99-5541-531-M473

Pagid Orange Rear Brake Pad Set, (98mm), Without Brake Pad Sensor, 911 Carrera 4 (1989-94), 911 Carrera 2 (1992-94), 911 Turbo (1991-94), 911 Carrera/4 (1995-98)     [Photo]

$260.75

99-5541-532-M473

Pagid Orange Rear Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Turbo/Turbo Look/Carrera S (1995-98)    [Photo]

$274.75
The Pagid Black RS 14 compound is a medium high friction value ceramic type compound with very good modulation, high fade resistance, low heat conductivity, and a good wear rate up to a temperature of 650°C (1.200°F). It is kind on discs, with visible grooving, but a limitation of hairline cracks. Applications: NASCAR, CART, F3, Touring cars, GT cars, WSC, Trans Am and Rally.

99-5541-631-M473

Pagid Black Front Brake Pad Set, (98mm), Without Brake Pad Sensor, 911 Carrera 2/4 (1989-94)    [Photo]

$260.75

99-5541-632-M473

Pagid Black Front Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Carrera 2/4 (1989-98), 911 Turbo (1991-94)     [Photo]

$291.00

99-5541-634-M473

Pagid Black Front Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Turbo (1995-98)     [Photo]

$341.50

99-5541-631-M473

Pagid Black Rear Brake Pad Set, (98mm), Without Brake Pad Sensor, 911 Carrera 4 (1989-94), 911 Carrera 2 (1992-94), 911 Turbo (1991-94), 911 Carrera/4 (1995-98)     [Photo]

$260.75

99-5541-632-M473

Pagid Black Rear Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Turbo (1995-98)     [Photo]

$291.00
The Pagid Yellow RS 9 compound is a classic long distance compound with superior pad and disc wear up to 450°C/842°F. It has a medium friction value suitable for booster equipped cars with good dimensioned braking systems and reasonable cooling. This compound is also an excellent solution for over braking (locking up) used together with rear axles using RS 4-2, RS 4-2-1, RS 4-4 on the front.
PEL-904597

Pagid Yellow Front Brake Pad Set, (98mm), Without Brake Pad Sensor, 911 Carrera 2/4 (1989-94)

No Longer Available 
PEL-904594

Pagid Yellow Front Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Carrera 2/4 (1989-98), 911 Turbo (1991-94)

No Longer Available 
PEL-900250

Pagid Yellow Rear Brake Pad Set, (64mm), With Brake Pad Sensor, 911 Carrera 2 (1990-91)

No Longer Available 
PEL-904597

Pagid Yellow Rear Brake Pad Set, (98mm), Without Brake Pad Sensor, 911 Carrera 4 (1989-94), 911 Carrera 2 (1992-94), 911 Turbo (1991-94), 911 Carrera/4 (1995-98)

No Longer Available 
PEL-900252

Pagid Yellow Rear Brake Pad Set, (132mm), With Brake Pad Sensor, 911 Turbo (1995-98)

No Longer Available 

  Page 1 of 2  12>

        

  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2009, Pelican Parts Inc.