| Porsche 911 Ignition Tune-Up - Page 3 |
Ignition Wire Sets |
| O.E. Wire Connectors/Terminals |
| The ignition wire sets for these later model twin-plug motors can be pretty pricey. If you are experiencing problems with your ignition, it could just be a faulty spark plug connector. Find the correct ones for your application here... |
|
 911-602-315-00-M47 | Spark Plug Connector, 911 Turbo (1991-92), Each Brand: Beru [More Info] |  |
| $25.25 |  |
 964-602-314-00-M47 | Spark Plug Connector, For All Cylinders Except No. 3 Exhaust, 911 Carrera 2/4 (1989-94), 911 Turbo (1993-94), Each Brand: Beru [More Info] |  |
| $25.50 |  |
 911-602-313-00-M47 | Spark Plug Connector, For Cylinder No. 3 Exhaust, 911 Carrera 2/4 (1989-94), For Cylinder No. 4,5,6 Intake, 911 Carrera/4 (1995-98), For Cylinder No. 5,6, 911 Turbo (1996-97), Each Brand: Beru [More Info] |  |
| $26.00 |  |
| 911-602-314-00 | Spark Plug Connector, For Cylinder No. 1,2,3, Intake, 911 Carrera/4 (1995-98), For Cylinder No. 3, 911 Turbo (1996-97), Each Brand: Beru [More Info] | $43.00 |  |
| 993-602-313-00 | Spark Plug Connector, For Cylinder No. 1,2,3,4,5,6 Exhaust, 911 Carrera/4 (1995-98), For Cylinder No. 1,2,4, 911 Turbo (1996-97), Each Brand: Beru [More Info] | $24.00 |  |
 999-652-871-22-M100 | Electrical Connector for Plug Housing, 911/911 Turbo (1990-98), Each Brand: Genuine Porsche [More Info] |  |
| $3.25 |  |
Ignition Wire Holders and Clips |
 964-602-559-00-M100 | Spark Plug Wire Clip on Lower Valve Cover (6 per car, sold individually), 911 Carrera 2/4 (1990-94), each Brand: Genuine Porsche [More Info] |  |
| $0.75 |  |
| Supertec Performance RSR-style Ignition Wire Holders |
| These are replicas of the wire holders used on 906, 911R, RSR, 934, 935, and other high performance Porsches. These holders contain new rubber grommets and are bendable for a custom fit. All six wires will fit in one holder. Available in gold or silver. |
|
 SPTC-WRH-9-G | Supertec Performance RSR-style Ignition Wire Holders (Gold), Set of 9 [More Info] | $74.90 |  |
 SPTC-WRH-9-S | Supertec Performance RSR-style Ignition Wire Holders (Silver), Set of 9 [More Info] | $74.90 |  |
| Supertec Performance RSR-style Spark Plug Connector Holders |
| These holders are used to hold the lower plugs on a twin-plug air cooled Porsche. Many Porsche racers choose to use them on the top plugs as well. This product is stainless steel, dipped in hard plastic, and made in the USA. |
|
 SPTC-SUP-106 | Supertec Performance RSR-style Spark Plug Connector Holder, Set of 6 [More Info] | $58.95 |  |
Tune-up DVD |
| Yellow Cap Garage has created a new brand of repair DVD. A Red Cap Garage DVD is where YCG goes into other expert's garages and film them doing the work. This 993 Tune-Up DVD features Robin Sun & Chris Walrod of www.p-car.com fame! This DVD shows you every step of the process. All sequences shown in this DVD are completed on an actual car and not on a bench or engine stand. This DVD will step you through the following sequences: - Tools required to do Tune-Up maintenance & where to buy specialty tools
- Parts required to do Tune-Up maintenance w/actual Porsche part no.(s)
- Safety tips & helpful hints on how to lift a 993
- How to create access to both left/right side of car as well as underneath the car in order to perform service
- How to drain oil tank & replace filter
- How to drain crankcase oil & replace filter
- How to remove/install (12) sparkplugs & (2) distributor caps/rotors
- How to remove/install (2) V-belts & A/C belt
- How to remove/install (2) pollen filters
- How to replace valve cover gaskets
- How to replace flush brake system
- How to add oil correctly to the car without creating a mess!
- Closing tips to assure the job is right and complete
Run time: 2.5 Hours |
|
 PEL-RCG-993TU | Tune-Up DVD for Porsche 993 (1995-98), 2hrs 30min [More Info] | Coming soon | |
Tools |
| You can only do a job correctly if you have the right tool. Here at Pelican we offer a variety of specialized tools for working on your BMW's ignition system. |
|
| Jacobs Plug Gapping Tool |
| A specially made set of pliers that accurately and consistently gaps spark plugs with the outer electrode perfectly perpendicular to the center electrode every time! |
|
 PEL-PP802060 | Jacobs Plug Gapping Tool [More Info] | No Longer Available | |