| Porsche 911 & 912 Air Conditioning - Page 2 |
O-Rings |
| A/C O-Ring Kits |
| 10-9808-204-M325 | A/C O-Ring Kit, Contains 7 Different Sizes with a Total of 35 O-Rings, 911 (1965-89), As Needed, Each
Brand: Santech [Photo] |  |
| $29.50 |  |
Relays  |
| Relays are a very common source of failure in the 911. There are several different relays used on the 911. All are subject to failure after many years of service. Before suspecting your wiring or your components, be sure to check your relays. It is wise to have at least some spares on hand so that you can check proper operation of the ones that are installed in your car. |
|
| 911-615-103-01-M206 | Air Conditioning Relay, 911 (1972-89), Each
Brand: Wehrle [Photo] | |
| $8.25 | |
| 911-615-103-01-M206 | | $8.25 | |
| 911-615-115-00-M100 | Rear Window Defogger, 911 (1970-89), Each
Brand: Genuine Porsche [Photo] [Photo] | |
| $134.25 | |
| 914-618-303-11-M44 | Hazard Flasher/Blinker Relay, 911 (1969-84), Each
Brand: Hella [Photo] | |
| $50.75 | |
| 911-615-109-01-M58 | Round Relay, Various Uses, 911 (1969-89), As Needed, Each
Brand: OEM [Photo] [Photo] | |
| $25.25 | |
901-612-333-00-OEM | Relay Socket w/Harness, 911 (1965-73), Each
Brand: Genuine Porsche [Photo] | $57.00 | |
RennAire A/C Systems |
| RennAire products are true upgrades that offer better-than-original performance and employ the latest and greatest in air conditioning technology. RennAire products are engineered to fit precisely in place of factory pieces, so no modifications are required to install. Only the highest-quality fittings, hoses, and components are used -- and every part is checked for quality before leaving the facility. All RennAire products carry a one-year warranty. |
|
| RennAire ProCooler Kit |
| Replacing the factory receiver/drier, the ProCooler is a refrigerated receiver/drier that requires no modification to the car. In addition to lowering vent temperatures as much as twenty degrees, the ProCooler substantially lowers operating pressure. Because the ProCooler does not rely on airflow, it improves AC efficiency even in traffic when condensers suffer. |
|
RA-PRO-COOLER | RennAire ProCooler Kit, 911 (1965-89) [Photo] | $299.00 | |
| RennAire Serpentine Evaporator |
| RennAire's high efficiency serpentine evaporator is a drop-in replacement for the stock unit on all 911s through 1989. Installation requires no modification to the evaporator box or to the body. The serpentine design improves cooling performance and increases airflow over the old tube and fin configuration. An Expansion Valve (Parker Hannifin) is included. |
|
RA-SERP-EVAP | RennAire High Efficiency Serpentine Evaporator, 911 (1965-89) includes flare adapters for early cars [Photo] [Photo] | $269.00 | |
| RennAire Barrier Hose Kit |
| RennAire Barrier Hose Kits are available with either flare or O-ring fittings. All hose sets come with the correct OEM fittings, pre-bent with OEM brackets installed so installation truly is drop-in. RennAire hoses are constructed from the latest reduced diameter barrier hose from Parker Industries and are compatible with R12 and R134a. The smaller size eases installation, and RennAire's hoses are about ten pounds lighter than the original Porsche hoses. Aluminum fittings reduce corrosion. A true drop-in upgrade, RennAire's Barrier Hose Kit works with an otherwise stock system, so they are a preferred replacement to the factory hoses even if the remainder of the system remains stock. |
|
RA-HOSE-EARLY | RennAire Barrier Hose Kit, 911 (1965-84) with flare fittings [Photo] | $339.00 | |
RA-HOSE-LATE | RennAire Barrier Hose Kit, 911 (1985-89) with O-Ring fittings [Photo] | $339.00 | |
| RennAire Sanden 507 Compressor Kit |
| The Sanden 507 compressor is the preferred replacement for the factory York or Nippondenso compressors. Fitting requires the appropriate RennAire adaptor plate and hardware (sold separately). |
|
RA-SANDEN | RennAire Sanden 507 Compressor Kit, 911 (1965-89) [Photo] [Photo] | $249.00 | |
