| Porsche 911 & 912 Transmission - Page 3 |
Transmission Mainshaft Seals |
| The mainshaft seal prevents transmission oil from leaking out the driveshaft into the flywheel/clutch area. This especially gets messy when the flywheel starts swinging oil around like a Texas twister! |
|
| 113-311-113B-M30 | 901 Mainshaft Seal, 911/912 (1965-71), Each
Brand: Elring Klinger [Photo] |  |
| $1.75 |  |
| 999-113-182-40-M104 | 915 Mainshaft Seal, 911 (1972-early 1973), Each
Brand: CFW-Freudenberg [Photo] | |
| $9.75 | |
| 999-113-327-40-M30 | 915 Mainshaft Seal, 911 (late 1973), Each
Brand: Elring Klinger [Photo] | |
| $12.00 | |
Transmission Shift Shaft & Side Output Shaft Seals |
| The Shift Shaft seal prevents transmission oil from leaking out where the shift rod enters into the small end of the transmission. |
|
| 900-112-001-50-M213 | Transmission Shift Shaft Seal For 901 Transmissions, 911/912 (1965-71), Each
Brand: DPH [Photo] [Photo] | |
| $4.50 | |
| 999-113-185-40-M30 | Transmission Shift Shaft Seal For 915 Transmissions, 911 (1972-73), Each
Brand: Elring Klinger [Photo] [Photo] | |
| $4.00 | |
| 999-113-058-50-M30 | Transmission Differential Output Shaft Side Seal, 45 X 65 X 10/1 (sold per each, 2 req.), 911 (1965-68), 911 (1961-71 with aluminum chill cast housing), 912 (through 1968), 912 (1969 with aluminum chill cast housing)
Brand: Elring Klinger [Photo] | |
| $5.00 | |
| 999-113-183-40-M30 | Transmission Differential Output Shaft Side Seal, 45 X 68 X 10 (sold per each, 2 req.), 911 (1969-71 with magnesium pressure cast housing), 911 (1972-86), 912 (1969 with magnesium pressure cast housing)
Brand: Elring Klinger [Photo] [Photo] | |
| $4.00 | |
Transmission Mainshaft Bearings  |
| These are the bearings that support the main driveshaft. The intermediate plate bearing is a four-point ball bearing. The flywheel end bearing is a cylindrical roller bearing. |
|
| 999-053-025-00-M260 | 901 Intermediate Plate End Mainshaft Bearing, 911/912 (1965-71), Each
Brand: OEM [Photo] | |
| $218.25 | |
| 999-110-008-00-M34 | 901 Flywheel End Mainshaft Bearing, 911/912 (1965-71), Each
Brand: FAG [Photo] | |
| $260.00 | |
999-038-001-00 | 901 Flywheel End Mainshaft Lock Washer, 911/912 (1965-71), Each [Photo] | $3.70 | |
| 915-302-399-05-M251 | 915 Intermediate Plate End Mainshaft Bearing, 911 (1972-73), Each
Brand: Timken [Photo] | |
| $292.75 | |
| 999-110-146-00-M34 | 915 Flywheel End Mainshaft Bearing, 911 (1972-73), Each
Brand: FAG [Photo] | |
| $207.25 | |
Transmission Pinion Bearings |
| The pinion bearings support the main ring and pinion mechanism within the transmission. The intermediate plate bearing is a 4-point contact ball bearing. The flywheel end bearing is a cylindrical roller bearing. |
|
| 999-052-016-00-M34 | 901 Intermediate Plate End Pinion Bearing, 911/912 (1965-71), Each
Brand: FAG [Photo] | |
| $203.25 | |
| 999-110-012-00-M100 | 901 Flywheel End Pinion Bearing, 911/912 (1965-71), Each
Brand: Genuine Porsche [Photo] | |
| $260.50 | |
| 999-052-043-00-M100 | 915 Intermediate Plate End Pinion Bearing, 911 (1972-73), Each
Brand: Genuine Porsche [Photo] | |
| $127.50 | |
| 999-110-032-00-M34 | 915 Flywheel End Pinion Bearing, 911 (1972-73), Each
Brand: FAG [Photo] | |
| $31.50 | |
| Lock Nut |
| 915-302-282-00-M100 | Lock Nut for Transmission Pinion Shaft, 911 (1972-86), Each
Brand: Genuine Porsche [Photo] | |
| $12.25 | |
