| Porsche 911 & 912 Transmission - Page 2 |
Transmission Sliders |
| The sliders are the actual gears that slide up and down the shafts and engage the synchro hubs. Years of neglect by the previous owner may cause irreversible damage to both the synchro hubs and the sliders. These two gears grinding together are what you hear when the transmission doesn't shift properly. If you don't replace your synchro rings when crunching begins, you will damage the sliders and they will have to be replaced. |
|
| 911-302-226-00-M260 | 901 Slider, For 1st And Reverse Gears, For 5-Speed Transmission, 911/912 (1965-71), Each
Brand: OEM [Photo] |  |
| $532.00 |  |
| 911-302-411-10-M260 | 901 Slider For 1st And 2nd Gears, Or 3rd And 4th Gears On 4-Speed Transmission, Also For 2nd And 3rd Gears Or 4th And 5th Gears On 5-Speed Transmission, 911 (1965-71), Each
Brand: OEM [Photo] | |
| $198.75 | |
| 915-302-411-00-M260 | 915 Slider For 1st And 2nd Gears, 911 (1972-73), Each
Brand: OEM [Photo] | |
| $229.25 | |
| 911-302-411-10-M260 | 915 Slider For 3rd And 4th Gears, 911 (1972-73), Each
Brand: OEM [Photo] | |
| $198.75 | |
| 915-302-227-09-M260 | 915 Slider For 5th And Reverse Gears, 911 (1972-73), Each
Brand: OEM [Photo] | |
| $620.25 | |
| Guide Sleeves |
| This is the guide that the slider operates on. The channels in the slider move over the arms of the guide like rails. Sometimes, these guides can be damaged or worn over time, so it might be a good idea to replace them along with the slider sleeves. |
|
| 915-302-401-00 | 915 Guide Sleeve, 1st/2nd, 911 (1972-76) [Photo] | No Longer Available | |
| 915-302-401-02-M260 | 915 Guide Sleeve, 1st/2nd, 911 (1977-86) [Photo] | |
| $179.75 | |
| 915-302-405-01-M260 | 915 Guide Sleeve, 5th/Reverse, 911 (1972-86) [Photo] | |
| $254.50 | |
Synchro Hub Removal Tool |
| This tool helps you to remove the synchro hubs (dog teeth) from the gear sets. Without it, you may need to cut off the synchro hub from the gear. Note: not to be used to remove the neighbor's dog's teeth from your ankle. |
|
| PEL-SIR-P225 | Synchro Hub Removal Tool, 901 - All Gears, 912 (1965-71), 915 - 3rd, 4th, 5th, 911 (1972-86) | $98.00 | |
| PEL-TOL-P226 | Synchro Hub Removal Tool, 915 5-speed transmission, 911 (1972-86), 1st and 2nd Gears | $107.00 | |
Transmission Gaskets |
| 901-301-392-12-M100 | Transmission Gasket, Front Cover to Gear Housing, 911 (1965-71) and 912 (1969) with Magnesium Pressure Cast Housing
Brand: Genuine Porsche [Photo] | |
| $3.00 | |
| 915-301-191-00-M260 | Transmission Gasket, Gear Housing to Transmission Case, 911 (1972-86), 912E
Brand: OEM [Photo] | |
| $1.00 | |
| 915-301-351-00-M260 | Transmission Gasket, Front Cover to Gear Housing, 911 (1972-86), 912E
Brand: OEM [Photo] | |
| $1.25 | |
| 915-303-225-00-M260 | Gasket, Transmission Cover Plate for Shift Rod Support Fork, 911 (1972-86), 912E, 911 Turbo (1976-88), 912E
Brand: OEM [Photo] | |
| $0.75 | |
| Transmission Gasket Sets |
| This set contains all gaskets and seals required to rebuild your transmission. |
|
| 901-300-901-00-M30 | 901 Transmission Gasket Set, Aluminum Housing, 911/912 (1965-69), Each
Brand: Elring Klinger [Photo] [Photo] | |
| $57.00 | |
| 901-300-916-00-M30 | 901 Transmission Gasket Set, Magnesium Housing, 911 (1969-71), Each
Brand: Elring Klinger [Photo] | |
| $33.50 | |
| 915-300-911-01-M30 | 915 Transmission Gasket Set, 911 (1972-73), Each
Brand: Elring Klinger [Photo] | |
| $51.25 | |
